sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
nuttx/configs/mikroe-stm32f4/src/up_nsh.c

286 lines
8.0 KiB
C
Raw Blame History

/****************************************************************************
* config/mikroe_stm32f4/src/up_nsh.c
* arch/arm/src/board/up_nsh.c
*
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/kmalloc.h>
#ifdef CONFIG_STM32_SPI3
# include <nuttx/mmcsd.h>
#endif
#ifdef CONFIG_MTD_M25P
# include <nuttx/mtd.h>
#endif
#ifdef CONFIG_SYSTEM_USBMONITOR
# include <apps/usbmonitor.h>
#endif
#ifdef CONFIG_STM32_OTGFS
# include "stm32_usbhost.h"
#endif
#include "stm32.h"
#include "mikroe-stm32f4-internal.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#define HAVE_USBDEV 1
#define HAVE_USBHOST 1
#define HAVE_USBMONITOR 1
#define NSH_HAVEMMCSD 1
/* Can't support USB host or device features if USB OTG FS is not enabled */
#ifndef CONFIG_STM32_OTGFS
# undef HAVE_USBDEV
# undef HAVE_USBHOST
# undef HAVE_USBMONITOR
#endif
/* Can't support USB device is USB device is not enabled */
#ifndef CONFIG_USBDEV
# undef HAVE_USBDEV
# undef HAVE_USBMONITOR
#endif
/* Can't support USB host is USB host is not enabled */
#ifndef CONFIG_USBHOST
# undef HAVE_USBHOST
#endif
/* Check if we should enable the USB monitor before starting NSH */
#if !defined(CONFIG_USBDEV_TRACE) || !defined(CONFIG_SYSTEM_USBMONITOR)
# undef HAVE_USBMONITOR
#endif
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
* is not enabled.
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SPI3)
# undef NSH_HAVEMMCSD
#endif
#ifndef CONFIG_NSH_MMCSDMINOR
# define CONFIG_NSH_MMCSDMINOR 0
#endif
# ifndef CONFIG_RAMMTD_BLOCKSIZE
# define CONFIG_RAMMTD_BLOCKSIZE 512
# endif
# ifndef CONFIG_RAMMTD_ERASESIZE
# define CONFIG_RAMMTD_ERASESIZE 4096
# endif
# ifndef CONFIG_EXAMPLES_SMART_NEBLOCKS
# define CONFIG_EXAMPLES_SMART_NEBLOCKS (22)
# endif
# undef CONFIG_EXAMPLES_SMART_BUFSIZE
# define CONFIG_EXAMPLES_SMART_BUFSIZE \
(CONFIG_RAMMTD_ERASESIZE * CONFIG_EXAMPLES_SMART_NEBLOCKS)
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# else
# define message printf
# endif
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/* Pre-allocated simulated flash */
#ifdef CONFIG_RAMMTD
//static uint8_t g_simflash[CONFIG_EXAMPLES_SMART_BUFSIZE];
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
#if defined(HAVE_USBHOST) || defined(HAVE_USBMONITOR)
int ret;
#endif
#ifdef CONFIG_STM32_SPI3
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
#endif
int ret;
/* Configure SPI-based devices */
#ifdef CONFIG_STM32_SPI3
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port 3\n");
spi = up_spiinitialize(3);
if (!spi)
{
message("nsh_archinitialize: Failed to initialize SPI port 3\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port 3\n");
/* Now bind the SPI interface to the M25P8 SPI FLASH driver */
#ifdef CONFIG_MTD
message("nsh_archinitialize: Bind SPI to the SPI flash driver\n");
mtd = m25p_initialize(spi);
if (!mtd)
{
message("nsh_archinitialize: Failed to bind SPI port 3 to the SPI FLASH driver\n");
}
else
{
message("nsh_archinitialize: Successfully bound SPI port 3 to the SPI FLASH driver\n");
/* Now initialize a SMART Flash block device and bind it to the MTD device */
#if defined(CONFIG_MTD_SMART) && defined(CONFIG_FS_SMARTFS)
smart_initialize(0, mtd);
#endif
}
/* Create a RAM MTD device if configured */
#ifdef CONFIG_RAMMTD
{
uint8_t *start = (uint8_t *) kmalloc(CONFIG_EXAMPLES_SMART_BUFSIZE);
mtd = rammtd_initialize(start, CONFIG_EXAMPLES_SMART_BUFSIZE);
mtd->ioctl(mtd, MTDIOC_BULKERASE, 0);
/* Now initialize a SMART Flash block device and bind it to the MTD device */
#if defined(CONFIG_MTD_SMART) && defined(CONFIG_FS_SMARTFS)
smart_initialize(1, mtd);
#endif
}
#endif /* CONFIG_RAMMTD */
#endif /* CONFIG_MTD */
#endif /* CONFIG_STM32_SPI3 */
/* Create the SPI FLASH MTD instance */
/* The M25Pxx is not a good media to implement a file system..
* its block sizes are too large
*/
/* Mount the SDIO-based MMC/SD block driver */
#ifdef NSH_HAVEMMCSD
/* Bind the spi interface to the MMC/SD driver */
message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n",
CONFIG_NSH_MMCSDMINOR);
ret = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi);
if (ret != OK)
{
message("nsh_archinitialize: Failed to bind SPI to the MMC/SD driver: %d\n", ret);
}
else
{
message("nsh_archinitialize: Successfully bound SPI to the MMC/SD driver\n");
}
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. stm32_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = stm32_usbhost_initialize();
if (ret != OK)
{
message("nsh_archinitialize: Failed to initialize USB host: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
message("nsh_archinitialize: Start USB monitor: %d\n", ret);
}
#endif
return OK;
}
Reference in New Issue View Git Blame Copy Permalink