nuttx/arch/x86/include/i486/irq.h
patacongo dcd258ba4a Fix QEMU timer interrupts
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3387 42af7a65-404d-4744-a932-0658087f49c3
2011-03-16 17:17:58 +00:00

209 lines
6.4 KiB
C
Executable File

/****************************************************************************
* arch/x86/include/i486/irq.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* This file should never be included directed but, rather, only indirectly
* through nuttx/irq.h
*/
#ifndef __ARCH_X86_INCLUDE_I486_IRQ_H
#define __ARCH_X86_INCLUDE_I486_IRQ_H
/****************************************************************************
* Included Files
****************************************************************************/
#ifndef __ASSEMBLY__
# include <stdint.h>
# include <stdbool.h>
# include <arch/arch.h>
#endif
/****************************************************************************
* Definitions
****************************************************************************/
/* Common register save structgure created by up_saveusercontext() and by
* ISR/IRQ interrupt processing.
*/
#define REG_DS (0) /* Data segment selector */
#define REG_EDI (1) /* Saved by pusha */
#define REG_ESI (2) /* " " "" " " */
#define REG_EBP (3) /* " " "" " " */
#define REG_ESP (4) /* " " "" " " (NOTE 1)*/
#define REG_EBX (5) /* " " "" " " */
#define REG_EDX (6) /* " " "" " " */
#define REG_ECX (7) /* " " "" " " */
#define REG_EAX (8) /* " " "" " " */
#define REG_IRQNO (9) /* Interrupt number (NOTE 2) */
#define REG_ERRCODE (10) /* Error code (NOTE 2) */
#define REG_EIP (11) /* Pushed by process on interrupt processing */
#define REG_CS (12) /* " " "" " " "" " " " " */
#define REG_EFLAGS (13) /* " " "" " " "" " " " " */
#define REG_SP (14) /* " " "" " " "" " " " " */
#define REG_SS (15) /* " " "" " " "" " " " " */
/* NOTE 1: Two versions of the ESP are saved: One from the interrupt
* processing and one from pusha. Only the interrupt ESP (REG_SP) is used.
* NOTE 2: This is not really state data. Rather, this is just a convenient
* way to pass parameters from the interrupt handler to C cod.
*/
#define XCPTCONTEXT_REGS (16)
#define XCPTCONTEXT_SIZE (4 * XCPTCONTEXT_REGS)
/****************************************************************************
* Public Types
****************************************************************************/
/* This struct defines the way the registers are stored */
#ifndef __ASSEMBLY__
struct xcptcontext
{
/* The following function pointer is non-zero if there are pending signals
* to be processed.
*/
#ifndef CONFIG_DISABLE_SIGNALS
void *sigdeliver; /* Actual type is sig_deliver_t */
/* These are saved copies of instruction pointer and EFLAGS used during
* signal processing.
*/
uint32_t saved_eip;
uint32_t saved_eflags;
#endif
/* Register save area */
uint32_t regs[XCPTCONTEXT_REGS];
};
#endif
/****************************************************************************
* Inline functions
****************************************************************************/
#ifndef __ASSEMBLY__
/* Get the current FLAGS register contents */
static inline irqstate_t irqflags()
{
irqstate_t flags;
asm volatile(
"\tpushf\n"
"\tpop %0\n"
: "=rm" (flags)
:
: "memory");
return flags;
}
/* Get a sample of the FLAGS register, determine if interrupts are disabled.
* If the X86_FLAGS_IF is cleared by cli, then interrupts are disabled. If
* if the X86_FLAGS_IF is set by sti, then interrupts are enable.
*/
static inline bool irqdisabled(irqstate_t flags)
{
return ((flags & X86_FLAGS_IF) == 0);
}
static inline bool irqenabled(irqstate_t flags)
{
return ((flags & X86_FLAGS_IF) != 0);
}
/* Disable interrupts unconditionally */
static inline void irqdisable(void)
{
asm volatile("cli": : :"memory");
}
/* Enable interrupts unconditionally */
static inline void irqenable(void)
{
asm volatile("sti": : :"memory");
}
/* Disable interrupts, but return previous interrupt state */
static inline irqstate_t irqsave(void)
{
irqstate_t flags = irqflags();
irqdisable();
return flags;
}
/* Conditionally disable interrupts */
static inline void irqrestore(irqstate_t flags)
{
if (irqenabled(flags))
{
irqenable();
}
}
/****************************************************************************
* Public Variables
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_X86_INCLUDE_I486_IRQ_H */