Gregory Nutt de4fc5864f arch/arm/src/lpc54xx: Fix some GPIO interrupt configuration errors. Add logic to acknowledge rising/falling edge events. config/lpcxpresso-lpc545628: Add an intermediate interrupt handler to support acknowledgement of rising and falling edge interrupts.

2017-12-16 15:34:41 -06:00

..

lpc54_appinit.c

…

lpc54_autoleds.c

…

lpc54_boot.c

arch/arm/src/lpc54xx: Clone the LPC1788 LCD driver. The LPC54628 LCD interface is identical. The initial commit is a brute force clone. It still needs review to make sure the LDC is appropriately enabled in the SYSCON and that clocking is provided. Also, extend the SPI 'skeleton' file so that has a place to support for SPI DMA and the SPI exchange method.

2017-12-12 10:13:21 -06:00

lpc54_bringup.c

arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.

2017-12-16 13:00:06 -06:00

lpc54_buttons.c

arch/arm/src/lpc54xx: Fix some GPIO interrupt configuration errors. Add logic to acknowledge rising/falling edge events. config/lpcxpresso-lpc545628: Add an intermediate interrupt handler to support acknowledgement of rising and falling edge interrupts.

2017-12-16 15:34:41 -06:00

lpc54_lcd.c

arch/arm/src/lpc54xx: Clone the LPC1788 LCD driver. The LPC54628 LCD interface is identical. The initial commit is a brute force clone. It still needs review to make sure the LDC is appropriately enabled in the SYSCON and that clocking is provided. Also, extend the SPI 'skeleton' file so that has a place to support for SPI DMA and the SPI exchange method.

2017-12-12 10:13:21 -06:00

lpc54_sdram.c

arch/arm/src/lpc54xx: Correct the EMC divider register definition and one typo in the SDRAM setup. SDRAM is not fully functional on this board!

2017-12-12 08:24:57 -06:00

lpc54_userleds.c

…

lpcxpresso-lpc54628.h

arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.

2017-12-16 13:00:06 -06:00

Makefile

arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.

2017-12-16 13:00:06 -06:00