a1c991d921
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
61 lines
1.6 KiB
Plaintext
61 lines
1.6 KiB
Plaintext
Nucleo-64 Boards
|
|
================
|
|
|
|
The Nucleo-F334R8 is a member of the Nucleo-64 board family. The Nucleo-64
|
|
is a standard board for use with several STM32 parts in the LQFP64 package.
|
|
Variants include
|
|
|
|
Order code Targeted STM32
|
|
------------- --------------
|
|
NUCLEO-F030R8 STM32F030R8T6
|
|
NUCLEO-F070RB STM32F070RBT6
|
|
NUCLEO-F072RB STM32F072RBT6
|
|
NUCLEO-F091RC STM32F091RCT6
|
|
NUCLEO-F103RB STM32F103RBT6
|
|
NUCLEO-F302R8 STM32F302R8T6
|
|
NUCLEO-F303RE STM32F303RET6
|
|
NUCLEO-F334R8 STM32F334R8T6
|
|
NUCLEO-F401RE STM32F401RET6
|
|
NUCLEO-F410RB STM32F410RBT6
|
|
NUCLEO-F411RE STM32F411RET6
|
|
NUCLEO-F446RE STM32F446RET6
|
|
NUCLEO-L053R8 STM32L053R8T6
|
|
NUCLEO-L073RZ STM32L073RZT6
|
|
NUCLEO-L152RE STM32L152RET6
|
|
NUCLEO-L452RE STM32L452RET6
|
|
NUCLEO-L476RG STM32L476RGT6
|
|
|
|
Configurations
|
|
==============
|
|
|
|
nsh:
|
|
----
|
|
|
|
Configures the NuttShell (nsh) located at apps/examples/nsh.
|
|
|
|
adc:
|
|
----
|
|
|
|
Configures the ADC example located at apps/examples/adc.
|
|
|
|
highpri:
|
|
--------
|
|
|
|
Configures the high priority interrupts example (ADC + PWM)
|
|
|
|
spwm1 and spwm2:
|
|
----------------
|
|
|
|
Configures the sinusoidal PWM (SPWM) example which presents a simple use case
|
|
of the STM32 PWM lower-half driver without generic upper-half PWM logic.
|
|
|
|
There are two variants of this example, where functionality is achieved with
|
|
different periperals:
|
|
|
|
- spwm1 uses HRTIM to generate PWM and change waveform samples
|
|
- spwm2 uses TIM1 to generate PWM and TIM6 to change waveform samples
|
|
|
|
At the moment, the waveform parameters are hardcoded, but it should be easy to
|
|
modify this example and make it more functional.
|
|
|