48 lines
1.7 KiB
ReStructuredText
48 lines
1.7 KiB
ReStructuredText
===========
|
|
LCD Drivers
|
|
===========
|
|
|
|
- ``include/nuttx/lcd/lcd.h``. Structures and APIs needed to
|
|
work with LCD drivers are provided in this header file. This
|
|
header file also depends on some of the same definitions used
|
|
for the frame buffer driver as provided in
|
|
``include/nuttx/video/fb.h``.
|
|
|
|
- ``struct lcd_dev_s``. Each LCD device driver must implement
|
|
an instance of ``struct lcd_dev_s``. That structure defines a
|
|
call table with the following methods:
|
|
|
|
Get information about the LCD video controller configuration
|
|
and the configuration of each LCD color plane.
|
|
|
|
The following are provided only if the video hardware supports
|
|
RGB color mapping:
|
|
|
|
The following are provided only if the video hardware supports
|
|
a hardware cursor:
|
|
|
|
Get the LCD panel power status (0: full off -
|
|
``CONFIG_LCD_MAXPOWER``: full on). On backlit LCDs, this
|
|
setting may correspond to the backlight setting.
|
|
|
|
Enable/disable LCD panel power (0: full off -
|
|
``CONFIG_LCD_MAXPOWER``: full on). On backlit LCDs, this
|
|
setting may correspond to the backlight setting.
|
|
|
|
Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST) \*/
|
|
|
|
Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST)
|
|
|
|
- **Binding LCD Drivers**. LCD drivers are not normally directly
|
|
accessed by user code, but are usually bound to another, higher
|
|
level device driver. In general, the binding sequence is:
|
|
|
|
#. Get an instance of ``struct lcd_dev_s`` from the
|
|
hardware-specific LCD device driver, and
|
|
#. Provide that instance to the initialization method of the
|
|
higher level device driver.
|
|
|
|
- **Examples**: ``drivers/lcd/p14201.c``,
|
|
``boards/arm/sam34/sam3u-ek/src/up_lcd.c.`` See also the usage
|
|
of the LCD driver in the ``graphics/`` directory.
|