nuttx

chip

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

gnu

STM32: Add support for the IAR compiler

2016-04-02 06:58:55 -06:00

iar

STM32: Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and STM32F107RC.

2016-08-24 10:10:33 -06:00

chip.h

Add stm32f105r support

2016-06-06 12:52:41 -07:00

Kconfig

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

Make.defs

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32_1wire.c

Minor changes

2016-11-01 23:48:44 +03:00

stm32_1wire.h

Costmetic changes from review of last PR

2016-05-25 18:04:39 -06:00

stm32_adc.c

STM32 ADC: Fix compilation error when DMA isn't enabled

2016-11-02 12:52:19 -04:00

stm32_adc.h

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32_aes.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_aes.h

STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>

2015-02-04 06:49:05 -06:00

stm32_alarm.h

STM32 F4: Add a custom RTC driver

2016-04-02 10:46:10 -06:00

stm32_allocateheap.c

Rename CONFIG_DEBUG_HEAP to CONFIG_HEAP_COLORATION

2016-06-15 14:48:06 -06:00

stm32_bbsram.c

With last change, stm32_pwr_enablebkp() no longer returns a value

2016-08-09 07:50:31 -06:00

stm32_bbsram.h

Mostly costmetic changes from review of last PR

2016-06-29 07:33:30 -06:00

stm32_bkp.h

…

stm32_can.c

can.h moved from include/nuttx/ to include/nuttx/drivers.

2016-07-20 13:38:36 -06:00

stm32_can.h

can.h moved from include/nuttx/ to include/nuttx/drivers.

2016-07-20 13:38:36 -06:00

stm32_capture.c

Correct conditional compilation in STM32 timer cpature logic

2016-06-03 08:41:53 -06:00

stm32_capture.h

A few more cosmetic changes

2015-12-24 07:38:17 -06:00

stm32_ccm.c

Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.

2015-02-21 15:15:51 -06:00

stm32_ccm.h

Clean up some naming

2015-12-01 15:04:12 -06:00

stm32_dac.c

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32_dac.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_dbgmcu.h

…

stm32_dma2d.c

dma2d: fix an error in up_dma2dcreatelayer where an invalid pointer was returned when a certain underlying function failed.

2016-10-07 13:42:24 +02:00

stm32_dma2d.h

Standardize the width of all comment boxes in C header files

2015-10-03 07:28:30 -06:00

stm32_dma.c

Fix STM32 DMA code and configuration for STM32F37X chips

2016-06-09 05:02:43 +02:00

stm32_dma.h

Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled

2016-06-12 14:44:04 -06:00

stm32_dumpgpio.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_eth.c

STM32 Ethernet: Correct typo in conditional logic

2016-10-01 07:32:41 -06:00

stm32_eth.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_exti_alarm.c

Simplify some computations

2016-07-23 08:13:25 -06:00

stm32_exti_gpio.c

Fix some spacing problems

2015-10-04 14:59:08 -06:00

stm32_exti_pwr.c

Fix some spacing problems

2015-10-04 14:59:08 -06:00

stm32_exti_pwr.h

STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.

2015-04-28 06:37:59 -06:00

stm32_exti.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_flash.c

I think, that Size is (highest address+1 - Base address)

2016-11-01 22:27:35 +00:00

stm32_flash.h

…

stm32_freerun.c

Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name.

2016-07-11 06:54:02 -06:00

stm32_freerun.h

Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name.

2016-07-11 06:54:02 -06:00

stm32_fsmc.h

Fix typo

2015-09-10 21:07:03 -04:00

stm32_getc.c

Update some comments

2016-06-04 13:04:13 -06:00

stm32_getc.h

KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc

2016-06-04 11:29:27 -06:00

stm32_gpio.c

hen configuring a GPIO via stm32_configgpio() the function will first set the mode to output and then set the initial state of the gpio later on. If you have an application with an externaly pulled-up pin, this would lead to a glitch on the line that may be dangerous in some applications (e.G. Reset Line for other chips, etc). This changes sets the output state before configuring the pin as an output.

2016-06-17 06:23:18 -06:00

stm32_gpio.h

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

stm32_i2c_alt.c

arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers

2016-11-03 14:23:42 -06:00

stm32_i2c.c

arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers

2016-11-03 14:23:42 -06:00

stm32_i2c.h

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32_idle.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_irq.c

Simplify some computations

2016-07-23 08:13:25 -06:00

stm32_iwdg.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_lowputc.c

STM32: Hook 1-Wire driver into the build system

2016-05-25 12:31:32 -06:00

stm32_lowputc.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_lse.c

Make stm32_pwr_enablebkp thread safe

2016-08-09 07:36:13 -06:00

stm32_lsi.c

The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.

2015-03-29 15:34:48 -06:00

stm32_ltdc.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_ltdc.h

Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).

2015-04-16 09:11:52 -06:00

stm32_mpuinit.c

Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU

2015-12-14 13:56:21 -06:00

stm32_mpuinit.h

…

stm32_oneshot_lowerhalf.c

Add a simulated oneshot lowerhalf driver

2016-08-12 13:14:03 -06:00

stm32_oneshot.c

STM32: Fix bug in oneshot timer

2016-07-13 10:20:38 -06:00

stm32_oneshot.h

STM32: Add support for Tickless mode (two timer implementation)

2016-07-06 12:48:30 -06:00

stm32_otgfs.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_otgfsdev.c

stm32_otgfsdev.c edited online with Bitbucket

2016-08-26 17:20:38 +00:00

stm32_otgfshost.c

Set USB address to avoid a failed assertion

2016-09-15 08:36:45 -06:00

stm32_otghs.h

Standardize the width of all comment boxes in C header files

2015-10-03 07:28:30 -06:00

stm32_otghsdev.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_otghshost.c

Set USB address to avoid a failed assertion

2016-09-15 08:36:45 -06:00

stm32_pm.h

Cosmetic: Move # of pre-processior command to column 1

2015-09-05 09:07:37 -06:00

stm32_pminitialize.c

…

stm32_pmsleep.c

…

stm32_pmstandby.c

…

stm32_pmstop.c

…

stm32_procfs_ccm.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

stm32_pwm.c

pwm.h moved from include/nuttx/ to include/nuttx/drivers.

2016-07-20 13:48:24 -06:00

stm32_pwm.h

pwm.h moved from include/nuttx/ to include/nuttx/drivers.

2016-07-20 13:48:24 -06:00

stm32_pwr.c

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32_pwr.h

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32_qencoder.c

Add support for qencoders on various nucleo boards

2016-10-03 16:07:20 +02:00

stm32_qencoder.h

…

stm32_rcc.c

With last change, stm32_pwr_enablebkp() no longer returns a value

2016-08-09 07:50:31 -06:00

stm32_rcc.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_rng.c

2016-07-20 13:15:37 -06:00

stm32_rtc_lowerhalf.c

alarm 10 now runs to completion

2016-05-31 14:17:52 -07:00

stm32_rtc.c

Eliminate a warning

2016-06-16 15:26:19 -06:00

stm32_rtc.h

STM32: Move backup domain reset to stm32_rcc.c in order to avoid disabling LSE during RTC initialiation.

2016-06-16 09:52:15 -06:00

stm32_rtcc.c

A consequence of Max's change to the logic to enable access to the backup domain is that every call to enabledbkp(true) must be followed by a matching call to enablebkp(false). There was one cse in both RTCC drivers where that may not always be true.

2016-08-09 11:33:47 -06:00

stm32_rtcounter.c

With last change, stm32_pwr_enablebkp() no longer returns a value

2016-08-09 07:50:31 -06:00

stm32_sdadc.c

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32_sdadc.h

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32_sdio.c

Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().

2016-06-20 12:44:38 -06:00

stm32_sdio.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_serial.c

STM32 Serial: Trivial removal of an extra space in a comment

2016-10-28 07:16:52 -06:00

stm32_spi.c

stm32_modifycr2 should be available on all platforms is DMA is enabled.

2016-10-06 08:50:52 -06:00

stm32_spi.h

For STM32, rename up_spiinitialize to stm32_spibus_initialize

2016-01-26 12:22:27 -06:00

stm32_start.c

I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.

2016-07-14 07:29:39 -06:00

stm32_syscfg.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_tickless.c

Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name.

2016-07-11 06:54:02 -06:00

stm32_tim_lowerhalf.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_tim.c

STM32 timer: Eliminate a warning

2016-07-11 13:13:17 -06:00

stm32_tim.h

STM32 timer: Reorganize to conform better with the NuttX coding style

2016-07-06 13:36:17 -06:00

stm32_timerisr.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32_uart.h

STM32: Hook 1-Wire driver into the build system

2016-05-25 12:31:32 -06:00

stm32_uid.c

STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address

2015-11-18 14:33:27 -06:00

stm32_uid.h

Changes to last merge from review for compliance to coding standards

2015-11-17 21:10:17 -06:00

stm32_usbdev.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_usbdev.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_usbhost.c

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

stm32_usbhost.h

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

stm32_userspace.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32_userspace.h

…

stm32_waste.c

…

stm32_waste.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_wdg.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_wwdg.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32.h

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32f10xxx_dma.c

Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled

2016-06-12 14:44:04 -06:00

stm32f10xxx_rcc.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32f20xxx_dma.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32f20xxx_rcc.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32f30xxx_i2c.c

arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers

2016-11-03 14:23:42 -06:00

stm32f30xxx_rcc.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32f37xxx_rcc.c

Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.

2016-10-25 14:14:10 -06:00

stm32f40xxx_alarm.h

RTC lower half was missing call to F4 alarm cancel function

2016-04-04 08:23:09 -06:00

stm32f40xxx_dma.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32f40xxx_i2c.c

arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers

2016-11-03 14:23:42 -06:00

stm32f40xxx_rcc.c

I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.

2016-07-14 07:29:39 -06:00

stm32f40xxx_rtcc.c

A consequence of Max's change to the logic to enable access to the backup domain is that every call to enabledbkp(true) must be followed by a matching call to enablebkp(false). There was one cse in both RTCC drivers where that may not always be true.

2016-08-09 11:33:47 -06:00

stm32l15xxx_rcc.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00