sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
e1d3627bb1
nuttx/boards/z80/ez80/z20x/configs/sdboot
History
Xiang Xiao e1d3627bb1 sched/wdog: Change the default value of MAX_WDOGPARMS from 4 to 2 
since the maximum number of argument pass to wd_start in the whole
code base is 2 and change CONFIG_MAX_WDOGPARMS in some defconfig
from 1 to 2 oherwise pthread_condclockwait will fail

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib6cb28b8c0722058849e7be916e164513431d21c
2020-08-06 10:36:22 -06:00
..
defconfig sched/wdog: Change the default value of MAX_WDOGPARMS from 4 to 2 2020-08-06 10:36:22 -06:00
README.txt
sdboot_flash.ztgt
sdboot_ram.ztgt
sdboot.zdsproj eZ80/z20x: Correct uninitialized stack memory 2020-02-27 22:53:27 +01:00
sdboot.zfpproj eZ80/z20x: Correct uninitialized stack memory 2020-02-27 22:53:27 +01:00

README.txt 

README.txt
^^^^^^^^^^

sdboot.zdsproj is a simple ZDS-II project that will allow you
  to use the ZDS-II debugger.
sdboot.zfpproj is a simple project that will allow you to use the Smart Flash
  Programming.  NOTE:  As of this writing this project does not work, probably
  due to RAM configuration in the project.  Use ZDS-II instead as is described
  in the upper README.txt file
sdboot_flash.ztgt is the target file that accompanies the project files.  This
  one is identical to boards/scripts/z20x_ram.ztgt.
sdboot_ram.ztgt is the target file that accompanies the project files.  This
  one is identical to boards/scripts/z20x_flash.ztgt.