nuttx/boards/arm/kinetis/teensy-3.x/scripts/mk20dx256vlh7.ld
cuiziwei 25eb09c3bb nuttx/boards:add KEEP to *(.init_array .init_array.*)
replace *(.init_array .init_array.*) with KEEP(*(.init_array .init_array.*)).

The KEEP statement within a linker script will instruct the linker to keep the specified section, even if no symbols inside it are referenced. This statement is used within the SECTIONS section of the linker script. This becomes relevant when garbage collection is performed at link time, enabled by passing the --gc-sections switch to the linker. The KEEP statement instructs the linker to use the specified section as a root node when creating a dependency graph, looking for unused sections. Essentially forcing the section to be marked as used.

Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
2023-08-05 05:02:25 -07:00

131 lines
3.8 KiB
Plaintext

/****************************************************************************
* boards/arm/kinetis/teensy-3.x/scripts/mk20dx256vlh7.ld
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* The MK20DX256VLH7 has 256Kb of FLASH beginning at address 0x0000:0000 and
* 64Kb of SRAM beginning at address 0x1c00:0000 (SRAM_L) and 0x2000:000
* bitband region (SRAM_U).
*
* NOTE: that the first part of the K20 FLASH region is reserved for
* interrupt vectflash and, following that, is a region from 0x0000:0400
* to 0x0000:040f that is reserved for the FLASH control fields (FCF).
*
* NOTE: The on-chip RAM is split evenly among SRAM_L and SRAM_U. The RAM is
* also implemented such that the SRAM_L and SRAM_U ranges form a
* contiguous block in the memory map.
*/
MEMORY
{
vectflash (rx) : ORIGIN = 0x00000000, LENGTH = 1K
cfmprotect (rx) : ORIGIN = 0x00000400, LENGTH = 16
progflash (rx) : ORIGIN = 0x00000800, LENGTH = 256K - 2K
datasram (rwx) : ORIGIN = 0x1fff8000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
EXTERN(__flashconfigbytes)
SECTIONS
{
.vectors : {
_svectors = ABSOLUTE(.);
*(.vectors)
_evectors = ABSOLUTE(.);
} > vectflash
.cfmprotect : {
KEEP(*(.cfmconfig))
} > cfmprotect
.text : {
_stext = ABSOLUTE(.);
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > progflash
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > progflash
.ARM.extab : {
*(.ARM.extab*)
} > progflash
.ARM.exidx : {
__exidx_start = ABSOLUTE(.);
*(.ARM.exidx*)
__exidx_end = ABSOLUTE(.);
} > progflash
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
. = ALIGN(4);
_edata = ABSOLUTE(.);
} > datasram AT > progflash
_eronly = LOADADDR(.data);
.ramfunc ALIGN(4): {
_sramfuncs = ABSOLUTE(.);
*(.ramfunc .ramfunc.*)
_eramfuncs = ABSOLUTE(.);
} > datasram AT > progflash
_framfuncs = LOADADDR(.ramfunc);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > datasram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}