nuttx/boards/arm/sama5/sama5d4-ek/scripts/uboot.ld
cuiziwei 25eb09c3bb nuttx/boards:add KEEP to *(.init_array .init_array.*)
replace *(.init_array .init_array.*) with KEEP(*(.init_array .init_array.*)).

The KEEP statement within a linker script will instruct the linker to keep the specified section, even if no symbols inside it are referenced. This statement is used within the SECTIONS section of the linker script. This becomes relevant when garbage collection is performed at link time, enabled by passing the --gc-sections switch to the linker. The KEEP statement instructs the linker to use the specified section as a root node when creating a dependency graph, looking for unused sections. Essentially forcing the section to be marked as used.

Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
2023-08-05 05:02:25 -07:00

125 lines
3.4 KiB
Plaintext

/****************************************************************************
* boards/arm/sama5/sama5d4-ek/scripts/uboot.ld
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* The SAMA5D4 has 128 KB of ISRAM beginning at virtual address 0x0020:0000.
* This memory configuration, however, loads into the 256MB SDRAM on board
* the SAMA5D4-EK which lies at 0x2000:0000. An offset 0x00008000 is
* reserved for used by the U-boot bootloader.
*
* Vectors in low memory are assumed and 16KB of ISRAM is reserved at the
* high end of ISRAM for the page table.
*/
MEMORY
{
isram (W!RX) : ORIGIN = 0x00200000, LENGTH = 128K - 16K
sdram (W!RX) : ORIGIN = 0x20008000, LENGTH = 256M - 32K
}
ENTRY(entry)
ENTRY(_stext)
SECTIONS
{
.text :
{
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
*(.ARM.extab*)
*(.gnu.linkonce.armextab.*)
_etext = ABSOLUTE(.);
} > sdram
.init_section :
{
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > sdram
.ARM.extab :
{
*(.ARM.extab*)
} > sdram
/* .ARM.exidx is sorted, so has to go in its own output section. */
PROVIDE_HIDDEN (__exidx_start = .);
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > sdram
PROVIDE_HIDDEN (__exidx_end = .);
.data :
{
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
. = ALIGN(4);
_edata = ABSOLUTE(.);
} > sdram
.bss :
{
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > sdram
/* Uninitialized data */
.noinit :
{
_snoinit = ABSOLUTE(.);
*(.noinit*)
_enoinit = ABSOLUTE(.);
} > sdram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}