..
a1x
Rename arch/arm/src/a1x/chip to arch/arm/src/a1x/hardware.
2019-05-24 15:29:12 -06:00
am335x
video/videomode/videomode_lookup.c: At some additional lookups from FreeBSD. Not currently used in NuttX so ifdef'ed out for now.
2019-07-10 17:26:07 -06:00
arm
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
armv6-m
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
armv7-a
arch/arm/src/am335x/hardware/am335x_lcd.h: Fix a few typos. Add things needed by the LCDC driver.
2019-07-08 11:17:03 -06:00
armv7-m
Merged in jjlange/nuttx/lpc40xx (pull request #946 )
2019-07-11 16:50:00 +00:00
armv7-r
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
c5471
Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly).
2019-03-20 19:27:40 -06:00
common
arch/arm/src/common/up_lwl_console.c: Add support for a 'Lightweight Link' protocol between a target and debugger for use when you need a console but the target doesn't have a spare serial port or other available resource.
2019-06-03 07:31:17 -06:00
cxd56xx
Merged in alinjerpelea/nuttx (pull request #935 )
2019-07-04 14:02:05 +00:00
dm320
Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly).
2019-03-20 19:27:40 -06:00
efm32
arch/arm/src/efm32/efm32_usbhost: Apply Adam Porter's STM32 fix to EFM32 which has the same IP.
2019-06-24 07:50:24 -06:00
imx1
Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly).
2019-03-20 19:27:40 -06:00
imx6
Fix an error found in build testing.
2019-05-24 14:39:51 -06:00
imxrt
As promised, here's the patch that implements USDHC1 & 2 selection on the imxrt. If only one port is active (either 1 or 2) it will always be numbered as 0, if both are active then USDHC1 will be number 0, USDHC2 will be 1.
2019-07-07 17:07:04 -06:00
kinetis
arch/arm/src/am335x/hardware: Add register description files for DCAN and LCD.
2019-07-06 06:57:05 -06:00
kl
Rename arch/arm/src/kl/chip to arch/arm/src/kl/hardware.
2019-05-24 15:04:39 -06:00
lc823450
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
lpc11xx
Merged in jjlange/nuttx/lpc40xx (pull request #946 )
2019-07-11 16:50:00 +00:00
lpc17xx_40xx
Merged in jjlange/nuttx/lpc40xx (pull request #946 )
2019-07-11 16:50:00 +00:00
lpc31xx
arch/arm/src/stm32l4: if SRAM3 is used as heap, do not power it off in stop 2 mode.
2019-06-13 05:52:40 -06:00
lpc43xx
Merged in jjlange/nuttx/lpc40xx (pull request #946 )
2019-07-11 16:50:00 +00:00
lpc54xx
Merged in jjlange/nuttx/lpc40xx (pull request #946 )
2019-07-11 16:50:00 +00:00
lpc214x
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
lpc2378
Merged in jjlange/nuttx/lpc40xx (pull request #946 )
2019-07-11 16:50:00 +00:00
max326xx
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
moxart
arch/ and config/ files: All board interfaces (those starting with board_) must be defined in board-specific logic. Otherwise, they cannot be customized of specialized usage by different boards. The board_reset() interface was defined in architecture-specific logic that only called up_systemreset(). That is useless!
2019-03-25 11:12:38 -06:00
nrf52
Rename arch/arm/src/nrf52/chip to arch/arm/src/nrf52/hardware.
2019-05-25 07:29:41 -06:00
nuc1xx
Merged in jjlange/nuttx/lpc40xx (pull request #946 )
2019-07-11 16:50:00 +00:00
sam34
Fix a spelling error that was cloned in many files.
2019-05-31 07:24:19 -06:00
sama5
Squashed commit of the following:
2019-07-08 13:23:56 -06:00
samd2l2
arch/arm/src/samd2l2/hardware/samd_tc.h: Correct register bit field definitions used with TC_CTRLBCLR and TC_CTRLSET registers.
2019-06-26 13:20:39 -06:00
samd5e5
Rename arch/arm/src/samd5e5chip to arch/arm/src/samd5e5/hardware.
2019-05-25 08:12:10 -06:00
samv7
Rename arch/arm/src/samv7/chip to arch/arm/src/samv7/hardware.
2019-05-25 08:17:40 -06:00
stm32
In stm32_ctrlout() in the HS and FS host drivers, the data buffer isn't sent. This patch passes the buffer and buflen to the stm32_ctrl_senddata() function. With this change, I am able to send MBIM control messages to my USB modem, and read the response.
2019-06-23 07:05:21 -06:00
stm32f0l0g0
Merged in raiden00/nuttx_h7 (pull request #904 )
2019-06-16 17:34:09 +00:00
stm32f7
arch/arm/src/stm32f7/stm32_serial.c: This adds the ability to invert and swap RX/TX on STM32F7 UARTs. I added the TIOCGINVERT as well to reserve the IOCTL number, but did not implement it. This is the same as for TIOCGSINGLEWIRE.
2019-07-03 09:23:18 -06:00
stm32h7
arch/arm/src/stm32h7/stm32_spi.c: Correct a typo in condition compilation.
2019-07-05 08:14:18 -06:00
stm32l4
Merged in bkueng/nuttx/uart_invert_ioctl_continued (pull request #930 )
2019-07-03 20:22:09 +00:00
str71x
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
tiva
Merged in masayuki2009/nuttx.nuttx/tiva_with_qemu (pull request #927 )
2019-07-03 00:28:15 +00:00
tms570
Rename arch/arm/src/tmc570/chip to arch/arm/src/tmc570/hardware.
2019-05-24 14:53:32 -06:00
xmc4
Fix a spelling error that was cloned in many files.
2019-05-31 07:24:19 -06:00
.gitignore
Makefile
arch/arm: Add the initial cortex-a7 archtiecture support
2019-03-19 11:51:29 -06:00