nuttx/net/sixlowpan/sixlowpan.h
2017-03-28 17:26:53 -06:00

324 lines
12 KiB
C

/****************************************************************************
* net/sixlowpan/sixlowpan.h
*
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef _NET_SIXLOWPAN_SIXLOWPAN_H
#define _NET_SIXLOWPAN_SIXLOWPAN_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#ifdef CONFIG_NET_6LOWPAN
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Rime addres macros */
#define rimeaddr_copy(dest,src) \
memcpy(dest, src, CONFIG_NET_6LOWPAN_RIMEADDR_SIZE)
#define rimeaddr_cmp(addr1,addr2) \
(memcmp(addr1, addr2, CONFIG_NET_6LOWPAN_RIMEADDR_SIZE) == 0)
/****************************************************************************
* Public Types
****************************************************************************/
/* Rime address representation */
struct rimeaddr_s
{
uint8_t u8[CONFIG_NET_6LOWPAN_RIMEADDR_SIZE];
};
/****************************************************************************
* Public Data
****************************************************************************/
/* A pointer to the optional, architecture-specific compressor */
struct sixlowpan_nhcompressor_s; /* Foward reference */
extern FAR struct sixlowpan_nhcompressor_s *g_sixlowpan_compressor;
/* Rime Sniffer support for one single listener to enable trace of IP */
struct sixlowpan_rime_sniffer_s; /* Foward reference */
extern FAR struct sixlowpan_rime_sniffer_s *g_sixlowpan_sniffer;
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
struct net_driver_s; /* Forward reference */
struct socket; /* Forward reference */
/****************************************************************************
* Name: sixlowpan_initialize
*
* Description:
* sixlowpan_initialize() is called during OS initialization at power-up
* reset. It is called from the common net_setup() function.
* sixlowpan_initialize() configures 6loWPAN networking data structures.
* It is called prior to platform-specific driver initialization so that
* the 6loWPAN networking subsystem is prepared to deal with network
* driver initialization actions.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
void sixlowpan_initialize(void);
/****************************************************************************
* Function: psock_6lowpan_tcp_send
*
* Description:
* psock_6lowpan_tcp_send() call may be used only when the TCP socket is in a
* connected state (so that the intended recipient is known).
*
* Parameters:
* psock - An instance of the internal socket structure.
* buf - Data to send
* len - Length of data to send
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* -1 is returned, and errno is set appropriately. Returned error numbers
* must be consistent with definition of errors reported by send() or
* sendto().
*
****************************************************************************/
#ifdef CONFIG_NET_TCP
ssize_t psock_6lowpan_tcp_send(FAR struct socket *psock, FAR const void *buf,
size_t len);
#endif
/****************************************************************************
* Function: psock_6lowpan_udp_send
*
* Description:
* psock_6lowpan_udp_send() call may be used with connectionlesss UDP
* sockets.
*
* Parameters:
* psock - An instance of the internal socket structure.
* buf - Data to send
* len - Length of data to send
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* -1 is returned, and errno is set appropriately. Returned error numbers
* must be consistent with definition of errors reported by send() or
* sendto().
*
****************************************************************************/
#ifdef CONFIG_NET_UDP
ssize_t psock_6lowpan_udp_send(FAR struct socket *psock, FAR const void *buf,
size_t len);
#endif
/****************************************************************************
* Name: sixlowpan_output
*
* Description:
* Process an outgoing UDP or TCP packet. Called from UDP/TCP logic to
* determine if the the packet should be formatted for 6loWPAN output.
*
* Input Parameters:
* dev - The IEEE802.15.4 MAC network driver interface.
*
* Returned Value:
* Ok is returned on success; Othewise a negated errno value is returned.
* This function is expected to fail if the driver is not an IEEE802.15.4
* MAC network driver. In that case, the UDP/TCP will fall back to normal
* IPv4/IPv6 formatting.
*
****************************************************************************/
int sixlowpan_output(FAR struct net_driver_s *dev);
/****************************************************************************
* Name: sixlowpan_hc06_initialize
*
* Description:
* sixlowpan_hc06_initialize() is called during OS initialization at power-up
* reset. It is called from the common sixlowpan_initialize() function.
* sixlowpan_hc06_initialize() configures HC06 networking data structures.
* It is called prior to platform-specific driver initialization so that
* the 6loWPAN networking subsystem is prepared to deal with network
* driver initialization actions.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_NET_6LOWPAN_COMPRESSION_HC06
void sixlowpan_hc06_initialize(void);
#endif
/****************************************************************************
* Name: sixlowpan_hc06_initialize
*
* Description:
* Compress IP/UDP header
*
* This function is called by the 6lowpan code to create a compressed
* 6lowpan packet in the packetbuf buffer from a full IPv6 packet in the
* uip_buf buffer.
*
* HC-06 (draft-ietf-6lowpan-hc, version 6)
* http://tools.ietf.org/html/draft-ietf-6lowpan-hc-06
*
* NOTE: sixlowpan_compresshdr_hc06() does not support ISA100_UDP header
* compression
*
* Input Parameters:
* dev - A reference to the IEE802.15.4 network device state
* destaddr - L2 destination address, needed to compress IP dest
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_NET_6LOWPAN_COMPRESSION_HC06
void sixlowpan_compresshdr_hc06(FAR struct net_driver_s *dev,
FAR struct rimeaddr_s *destaddr);
#endif
/****************************************************************************
* Name: sixlowpan_hc06_initialize
*
* Description:
* Uncompress HC06 (i.e., IPHC and LOWPAN_UDP) headers and put them in
* sixlowpan_buf
*
* This function is called by the input function when the dispatch is HC06.
* We process the packet in the rime buffer, uncompress the header fields,
* and copy the result in the sixlowpan buffer. At the end of the
* decompression, g_rime_hdrlen and g_uncompressed_hdrlen are set to the
* appropriate values
*
* Input Parmeters:
* dev - A reference to the IEE802.15.4 network device state
* iplen - Equal to 0 if the packet is not a fragment (IP length is then
* inferred from the L2 length), non 0 if the packet is a 1st
* fragment.
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_NET_6LOWPAN_COMPRESSION_HC06
void sixlowpan_uncompresshdr_hc06(FAR struct net_driver_s *dev,
uint16_t iplen);
#endif
/****************************************************************************
* Name: sixlowpan_compresshdr_hc1
*
* Description:
* Compress IP/UDP header using HC1 and HC_UDP
*
* This function is called by the 6lowpan code to create a compressed
* 6lowpan packet in the packetbuf buffer from a full IPv6 packet in the
* uip_buf buffer.
*
* Input Parmeters:
* dev - A reference to the IEE802.15.4 network device state
* destaddr - L2 destination address, needed to compress the IP
* destination field
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_NET_6LOWPAN_COMPRESSION_HC1
void sixlowpan_compresshdr_hc1(FAR struct net_driver_s *dev,
FAR struct rimeaddr_s *destaddr);
#endif
/****************************************************************************
* Name: sixlowpan_uncompresshdr_hc1
*
* Description:
* Uncompress HC1 (and HC_UDP) headers and put them in sixlowpan_buf
*
* This function is called by the input function when the dispatch is
* HC1. It processes the packet in the rime buffer, uncompresses the
* header fields, and copies the result in the sixlowpan buffer. At the
* end of the decompression, g_rime_hdrlen and uncompressed_hdr_len
* are set to the appropriate values
*
* Input Parameters:
* dev - A reference to the IEE802.15.4 network device state
* iplen - Equal to 0 if the packet is not a fragment (IP length is then
* inferred from the L2 length), non 0 if the packet is a 1st
* fragment.
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_NET_6LOWPAN_COMPRESSION_HC1
void sixlowpan_uncompresshdr_hc1(FAR struct net_driver_s *dev,
uint16_t ip_len);
#endif
#endif /* CONFIG_NET_6LOWPAN */
#endif /* _NET_SIXLOWPAN_SIXLOWPAN_H */