337 lines
9.1 KiB
Plaintext
337 lines
9.1 KiB
Plaintext
/****************************************************************************
|
|
* configs/pic32mz-starterkit/nsh/mips-release.ld
|
|
*
|
|
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
/* Memory Regions ***********************************************************/
|
|
|
|
MEMORY
|
|
{
|
|
/* The PIC32MZ2048ECH144 and PIC32MZ2048ECM144 chips have has 2048Kb of
|
|
* program FLASH at physical address 0x1d000000 but is always accessed
|
|
* at KSEG0 address 0x9d00:0000
|
|
*/
|
|
|
|
kseg0_progmem (rx) : ORIGIN = 0x9d000000, LENGTH = 2048K
|
|
|
|
/* The PIC32MZ2048ECH144 and PIC32MZ2048ECM144 chips have 160Kb of boot
|
|
* FLASH: 80Kb at physical address 0x1fc4000 (Boot Flash 1, boot1) and
|
|
* 80Kb at physical address 0x1fc60000 (Boot Flash 2, boot2). Either
|
|
* may be mappled to the lower boot alias region (0x1fc00000,
|
|
* boolalias1) or the upper boot alias region (0x1fc20000, bootalias2).
|
|
* This linker script assumes that Boot Flash 1 is mapped to the lower
|
|
* alias region and Boot Flash 2 to the upper region.
|
|
*
|
|
* NOTE: This linker script simply writes into the lower boot alias,
|
|
* whichever boot FLASH that may correspond to. The other boot FLASH
|
|
* is simply ignored.
|
|
*
|
|
* The initial reset vector is in KSEG1, but all other accesses are in
|
|
* KSEG0.
|
|
*
|
|
* REGION PHYSICAL KSEG SIZE
|
|
* DESCRIPTION START ADDR (BYTES)
|
|
* ------------- ---------- ------ ----------------------
|
|
* Exceptions:*
|
|
* Reset 0x1fc00000 KSEG1 512 512
|
|
* TLB Refill 0x1fc00200 KSEG1 256 768
|
|
* Cache Error 0x1fc00300 KSEG1 128 896
|
|
* Others 0x1fc00380 KSEG1 128 1024 (1Kb)
|
|
* Interrupt 0x1fc00400 KSEG1 128 1152
|
|
* JTAG 0x1fc00480 KSEG1 16 1168
|
|
* Exceptions 0x1fc00490 KSEG0 8192-1168 8192 (4Kb)
|
|
* Debug code 0x1fc02000 KSEG1 4096-16 12272
|
|
* ADEVCFG3-0 0x1fc0ff40 KSEG1 16 12288 (12Kb)
|
|
* DEVCFG3-0 0x1fc0ffc0 KSEG1 16 12288 (12Kb)
|
|
*
|
|
* Exceptions assume:
|
|
*
|
|
* STATUS: BEV=0/1 and EXL=0
|
|
* CAUSE: IV=1
|
|
* JTAG: ProbEn=0
|
|
* And multi-vector support disabled
|
|
*/
|
|
|
|
kseg1_reset (rx) : ORIGIN = 0xbfc00000, LENGTH = 384
|
|
kseg1_genexcpt (rx) : ORIGIN = 0xbfc00180, LENGTH = 128
|
|
kseg1_ebexcpt (rx) : ORIGIN = 0xbfc00200, LENGTH = 128
|
|
kseg1_bevexcpt (rx) : ORIGIN = 0xbfc00380, LENGTH = 128
|
|
kseg1_intexcpt (rx) : ORIGIN = 0xbfc00400, LENGTH = 128
|
|
kseg1_dbgexcpt (rx) : ORIGIN = 0xbfc00480, LENGTH = 16
|
|
kseg0_bootmem (rx) : ORIGIN = 0x9fc00ac0, LENGTH = 8192-1196
|
|
kseg1_dbgcode (rx) : ORIGIN = 0xbfc02000, LENGTH = 4096-16
|
|
kseg1_adevcfg (r) : ORIGIN = 0x1fc0ff40, LENGTH = 128
|
|
kseg1_devcfg (r) : ORIGIN = 0x1fc0ffc0, LENGTH = 128
|
|
|
|
/* The The PIC32MZ2048ECH144 and PIC32MZ2048ECM144 chips have has 512Kb
|
|
* of data memory at physical address 0x00000000. Since the PIC32MZ
|
|
* has no data cache, this memory is always accessed through KSEG1.
|
|
*
|
|
* When used with MPLABX, we need to set aside 512 bytes of memory
|
|
* for use by MPLABX and 128 for DSP register storage.
|
|
*/
|
|
|
|
kseg1_datamem (rw!x) : ORIGIN = 0xa0000200, LENGTH = 512K - 640
|
|
}
|
|
|
|
OUTPUT_FORMAT("elf32-tradlittlemips")
|
|
OUTPUT_ARCH(mips)
|
|
ENTRY(__start)
|
|
|
|
SECTIONS
|
|
{
|
|
/* Boot FLASH sections */
|
|
|
|
.reset :
|
|
{
|
|
KEEP (*(.reset))
|
|
} > kseg1_reset
|
|
|
|
/* Exception handlers. The following is assumed:
|
|
*
|
|
* STATUS: BEV=1 and EXL=0
|
|
* CAUSE: IV=1
|
|
* JTAG: ProbEn=0
|
|
* And multi-vector support disabled
|
|
*
|
|
* In that configuration, the vector locations become:
|
|
*
|
|
* Reset, Soft Reset bfc0:0000
|
|
* TLB Refill bfc0:0200
|
|
* Cache Error bfc0:0300
|
|
* All others bfc0:0380
|
|
* Interrupt bfc0:0400
|
|
* EJTAG Debug bfc0:0480
|
|
*/
|
|
|
|
/* KSEG1 exception handler "trampolines" */
|
|
|
|
.gen_excpt :
|
|
{
|
|
KEEP (*(.gen_excpt))
|
|
} > kseg1_genexcpt
|
|
|
|
.ebase_excpt :
|
|
{
|
|
KEEP (*(.ebase_excpt))
|
|
} > kseg1_ebexcpt
|
|
|
|
.bev_excpt :
|
|
{
|
|
KEEP (*(.bev_excpt))
|
|
} > kseg1_bevexcpt
|
|
|
|
.int_excpt :
|
|
{
|
|
KEEP (*(.int_excpt))
|
|
} > kseg1_intexcpt
|
|
|
|
.dbg_excpt = ORIGIN(kseg1_dbgexcpt);
|
|
|
|
.start :
|
|
{
|
|
/* KSEG0 Reset startup logic */
|
|
|
|
*(.start)
|
|
|
|
/* KSEG0 exception handlers */
|
|
|
|
*(.nmi_handler)
|
|
*(.bev_handler)
|
|
*(.int_handler)
|
|
} > kseg0_bootmem
|
|
|
|
.dbg_code = ORIGIN(kseg1_dbgcode);
|
|
|
|
.adevcfg :
|
|
{
|
|
KEEP (*(.adevcfg))
|
|
} > kseg1_adevcfg
|
|
|
|
.devcfg :
|
|
{
|
|
KEEP (*(.devcfg))
|
|
} > kseg1_devcfg
|
|
|
|
/* Program FLASH sections */
|
|
|
|
.text :
|
|
{
|
|
_stext = ABSOLUTE(.);
|
|
*(.text .text.*)
|
|
*(.stub)
|
|
KEEP (*(.text.*personality*))
|
|
*(.gnu.linkonce.t.*)
|
|
*(.gnu.warning)
|
|
*(.mips16.fn.*)
|
|
*(.mips16.call.*)
|
|
|
|
/* Read-only data is included in the text section */
|
|
|
|
*(.rodata .rodata.*)
|
|
*(.rodata1)
|
|
*(.gnu.linkonce.r.*)
|
|
|
|
/* Small initialized constant global and static data */
|
|
|
|
*(.sdata2 .sdata2.*)
|
|
*(.gnu.linkonce.s2.*)
|
|
|
|
/* Uninitialized constant global and static data */
|
|
|
|
*(.sbss2 .sbss2.*)
|
|
*(.gnu.linkonce.sb2.*)
|
|
_etext = ABSOLUTE(.);
|
|
} > kseg0_progmem
|
|
|
|
/* Initialization data begins here in progmem */
|
|
|
|
_data_loaddr = LOADADDR(.data);
|
|
|
|
.eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
|
|
.eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
|
|
|
|
/* RAM functions are positioned at the beginning of RAM so that
|
|
* they can be guaranteed to satisfy the 2Kb alignment requirement.
|
|
*/
|
|
|
|
/* This causes failures if there are no RAM functions
|
|
.ramfunc ALIGN(2K) :
|
|
{
|
|
_sramfunc = ABSOLUTE(.);
|
|
*(.ramfunc .ramfunc.*)
|
|
_eramfunc = ABSOLUTE(.);
|
|
} > kseg1_datamem AT > kseg0_progmem
|
|
|
|
_ramfunc_loadaddr = LOADADDR(.ramfunc);
|
|
_ramfunc_sizeof = SIZEOF(.ramfunc);
|
|
_bmxdkpba_address = _sramfunc - ORIGIN(kseg1_datamem) ;
|
|
_bmxdudba_address = LENGTH(kseg1_datamem) ;
|
|
_bmxdupba_address = LENGTH(kseg1_datamem) ;
|
|
*/
|
|
|
|
.data :
|
|
{
|
|
_sdata = ABSOLUTE(.);
|
|
*(.data .data.*)
|
|
*(.gnu.linkonce.d.*)
|
|
KEEP (*(.gnu.linkonce.d.*personality*))
|
|
*(.data1)
|
|
} > kseg1_datamem AT > kseg0_progmem
|
|
|
|
.eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
|
|
_gp = ALIGN(16) + 0x7FF0 ;
|
|
|
|
.got :
|
|
{
|
|
*(.got.plt) *(.got)
|
|
} > kseg1_datamem AT > kseg0_progmem
|
|
|
|
.sdata :
|
|
{
|
|
*(.sdata .sdata.* .gnu.linkonce.s.*)
|
|
} > kseg1_datamem AT > kseg0_progmem
|
|
|
|
.lit8 :
|
|
{
|
|
*(.lit8)
|
|
} > kseg1_datamem AT > kseg0_progmem
|
|
|
|
.lit4 :
|
|
{
|
|
*(.lit4)
|
|
_edata = ABSOLUTE(.);
|
|
} >kseg1_datamem AT>kseg0_progmem
|
|
|
|
.sbss :
|
|
{
|
|
_sbss = ABSOLUTE(.);
|
|
*(.dynsbss)
|
|
*(.sbss .sbss.* .gnu.linkonce.sb.*)
|
|
*(.scommon)
|
|
} >kseg1_datamem
|
|
|
|
.bss :
|
|
{
|
|
*(.dynbss)
|
|
*(.bss .bss.*)
|
|
*(.gnu.linkonce.b.*)
|
|
*(COMMON)
|
|
_ebss = ABSOLUTE(.);
|
|
} > kseg1_datamem
|
|
|
|
/* Stabs debugging sections */
|
|
|
|
.stab 0 : { *(.stab) }
|
|
.stabstr 0 : { *(.stabstr) }
|
|
.stab.excl 0 : { *(.stab.excl) }
|
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
|
.stab.index 0 : { *(.stab.index) }
|
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
|
.comment 0 : { *(.comment) }
|
|
|
|
/* DWARF debug sections */
|
|
/* DWARF 1 */
|
|
|
|
.debug 0 : { *(.debug) }
|
|
.line 0 : { *(.line) }
|
|
|
|
/* GNU DWARF 1 extensions */
|
|
|
|
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
|
.debug_sfnames 0 : { *(.debug_sfnames) }
|
|
|
|
/* DWARF 1.1 and DWARF 2 */
|
|
|
|
.debug_aranges 0 : { *(.debug_aranges) }
|
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
|
|
|
/* DWARF 2 */
|
|
|
|
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
|
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
|
.debug_line 0 : { *(.debug_line) }
|
|
.debug_frame 0 : { *(.debug_frame) }
|
|
.debug_str 0 : { *(.debug_str) }
|
|
.debug_loc 0 : { *(.debug_loc) }
|
|
.debug_macinfo 0 : { *(.debug_macinfo) }
|
|
|
|
/* SGI/MIPS DWARF 2 extensions */
|
|
|
|
.debug_weaknames 0 : { *(.debug_weaknames) }
|
|
.debug_funcnames 0 : { *(.debug_funcnames) }
|
|
.debug_typenames 0 : { *(.debug_typenames) }
|
|
.debug_varnames 0 : { *(.debug_varnames) }
|
|
|
|
/DISCARD/ : { *(.note.GNU-stack) }
|
|
}
|