sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
e7fdbd8c81
nuttx/configs/u-blox-c027/include/board.h
jjlange e5dfd805e6 Merged in jjlange/nuttx/lpc40xx (pull request #946) 
Add support for LPC40xx family chips

* Corrected a few peripheral definitions and pin functions for the LPC17xx family.
    Added configuration options, chip definitions, and additional pin functions for the LPC40xx family.
    Added board configurations for Embedded Artists LPC4088 Quickstart board and LPC4088 Developer's kit.  These configurations are still something of a work in progress.  In particular, the LCD functionality is untested.

* First pass rename in *.c and *.h files.

* Renamed LPC17XX to LPC17XX_40XX in config files

* Rplaced LPC17xx with LPC17xx/LPC40xx in .c files

* Replaced LPC17xx with LPC17xx/LPC40xx in .h files

* Updated some documentation

* Working on moving directories

* moved arch/arm/src/lpc17xx and arch/arm/include/lpc17xx to lpc17xx_40xx

* Renamed LPC17_* constants / configuration options to LPC17_40_*

* Updated chip family name defines

* Renamed some chip-specific files

* Updated references to renamed files

* Updated references to lpc17_ to lpc17_40_

* Renamed source files from lpc17_* to lpc17_40_*

* Clean up white space

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-07-11 16:50:00 +00:00

256 lines
11 KiB
C
Raw Blame History

/************************************************************************************
* configs/u-blox-c027/include/board.h
*
* Copyright (C) 2016 Vladimir Komendantskiy. All rights reserved.
* Author: Vladimir Komendantskiy <vladimir@moixaenergy.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_U_BLOX_C027_INCLUDE_BOARD_H
#define __CONFIGS_U_BLOX_C027_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* NOTE: The following definitions require lpc17_40_syscon.h. It is not included here
* because the including C file may not have that file in its include path.
*/
#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency */
#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
/* This is the clock setup we configure for:
*
* SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for source
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1
* CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
*/
#define LPC17_40_CCLK 80000000 /* 80Mhz */
/* Select the main oscillator as the frequency source. SYSCLK is then the frequency
* of the main oscillator.
*/
#undef CONFIG_LPC17_40_MAINOSC
#define CONFIG_LPC17_40_MAINOSC 1
#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
/* Select the main oscillator and CCLK divider. The output of the divider is CCLK.
* The input to the divider (PLLCLK) will be determined by the PLL output.
*/
#define BOARD_CCLKCFG_DIVIDER 6
#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
*
* Source clock: Main oscillator
* PLL0 Multiplier value (M): 20
* PLL0 Pre-divider value (N): 1
*
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz
*/
#undef CONFIG_LPC17_40_PLL0
#define CONFIG_LPC17_40_PLL0 1
#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
#define BOARD_PLL0CFG_MSEL 20
#define BOARD_PLL0CFG_NSEL 1
#define BOARD_PLL0CFG_VALUE \
(((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
/* PLL1 -- Not used. */
#undef CONFIG_LPC17_40_PLL1
#define BOARD_PLL1CFG_MSEL 36
#define BOARD_PLL1CFG_NSEL 1
#define BOARD_PLL1CFG_VALUE \
(((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
/* USB divider. This divider is used when PLL1 is not enabled to get the
* USB clock from PLL0:
*
* USBCLK = PLL0CLK / 10 = 48MHz
*/
#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
/* FLASH Configuration */
#undef CONFIG_LPC17_40_FLASH
#define CONFIG_LPC17_40_FLASH 1
#define BOARD_FLASHCFG_VALUE 0x0000303a
/* Ethernet configuration */
#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV20
/* u-blox C027 board pin usage ***************************************************/
/* Pin Description Connector On Board
* -------------------------------- --------- --------------
* P0[0]/RD1/TXD3/SDA1 D14 TXD3/SDA1
* P0[1]/TD1/RXD3/SCL1 D15 RXD3/SCL1
* P0[2]/TXD0/AD0[7] USBTXD
* P0[3]/RXD0/AD0[6] USBRXD
* P0[4]/I2SRX-CLK/RD2/CAP2.0 CANRD CAN_RX2
* P0[5]/I2SRX-WS/TD2/CAP2.1 CANTD CAN_TX2
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] CANS SSEL1
* P0[7]/I2STX_CLK/SCK1/MAT2[1] MDMUSBDET
* P0[8]/I2STX_WS/MISO1/MAT2[2] MDMLVLOE
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] MDMILVLOE
* P0[10]/TXD2/SDA2 GPSTXD
* P0[11]/RXD2/SCL2 GPSRXD
* P0[15]/TXD1/SCK0/SCK MDMTXD
* P0[16]/RXD1/SSEL0/SSEL MDMRXD
* P0[17]/CTS1/MISO0/MISO MDMCTS
* P0[18]/DCD1/MOSI0/MOSI MDMDCD
* P0[19]/DSR1/SDA1 MDMDCR
* P0[20]/DTR1/SCL1 MDMDTR
* P0[21]/RI1/MCIPWR/RD1 MDMRI
* P0[22]/RTS1/TD1 MDMRTS
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] A0 I2S_CLK
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] A1 I2S_WS
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 A2 I2S_SDA
* P0[26]/AD0[3]/AOUT/RXD3 A3 AD0.3/AOUT
* P0[27]/SDA0/USB_SDA GPSSDA
* P0[28]/SCL0 GPSSCL
* P0[29]/USB_D+ MDMUSBDP
* P0[30]/USB_D- MDMUSBDM
*
* P1[0]/ENET_TXD0 ENET_TXD0
* P1[1]/ENET_TXD1 ENET_TXD1
* P1[4]/ENET_TX_EN ENET_TX_EN
* P1[8]/ENET_CRS ENET_CRS
* P1[9]/ENET_RXD0 ENET_RXD0
* P1[10]/ENET_RXD1 ENET_RXD1
* P1[14]/ENET_RX_ER ENET_RX_ER
* P1[15]/ENET_REF_CLK ENET_REF_CLK
* P1[16]/ENET_MDC ENET_MDC
* P1[17]/ENET_MDIO ENET_MDIO
* P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] GPSRST
* P1[19]/MC0A/USB_PPWR/N_CAP1.1 GPSPPS
* P1[20]/MCFB0/PWM1.2/SCK0 D13 PWM1.2/SCK0
* P1[21]/MCABORT/PWM1.3/SSEL0 D10 PWM1.3/SSEL0
* P1[22]/MC0B/USB-PWRD/MAT1.0 GPSINT
* P1[23]/MCFB1/PWM1.4/MISO0 D12 PWM1.4/MISO0
* P1[24]/MCFB2/PWM1.5/MOSI0 D11 PWM1.5/MOSI0
* P1[25]/MC1A/MAT1.1 ETH_LED_LNK
* P1[26]/MC1B/PWM1.6/CAP0.0 ETH_LED_SPD
* P1[27]/CLKOUT/USB-OVRCR-N/CAP0.1 ETH_OSC_EN
* P1[28]/MC2A/PCAP1.0/MAT0.0 ETH_RST
* P1[29]/MC2B/PCAP1.1/MAT0.1 GPSEN
* P1[30]/VBUS/AD0[4] A4 AD0.4
* P1[31]/SCK1/AD0[5] A5 AD0.5
*
* P2[0]/PWM1.1/TXD1 D3 PWM1.1
* P2[1]/PWM1.2/RXD1 D5 PWM1.2
* P2[2]/PWM1.3/CTS1/TRACEDATA[3] D6 PWM1.3
* P2[3]/PWM1.4/DCD1/TRACEDATA[2] D9 PWM1.4
* P2[4]/PWM1.5/DSR1/TRACEDATA[1] D8 PWM1.5
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] MDMEN
* P2[6]/PCAP1[0]/RI1/TRACECLK MDMPWRON
* P2[7]/RD2/RTS1 MDMGPIO1
* P2[8]/TD2/TXD2 MDMRST
* P2[9]/USB_CONNECT/RXD2 MDMUSBCON
* P2[10]/EINT0/NMI ISP_PAD
* P2[11]/EINT1/I2STX_CLK D7 EINT1
* P2[12]/EINT2/I2STX_WS D4 EINT2
* P2[13]/EINT3/I2STX_SDA D2 EINT3
*
* P3[25]/MAT0.0/PWM1.2 LED
*
* P4[28]/RX-MCLK/MAT2.0/TXD3 D0 TXD3
* P4[29]/TX-MCLK/MAT2.1/RXD3 D1 RXD3
*/
/* LED definitions ******************************************************************/
/* The u-blox C027 board has a single red LED (there are additional LEDs on the
* base board not considered here).
*/
/* ON OFF */
#define LED_STARTED 0 /* OFF ON (never happens) */
#define LED_HEAPALLOCATE 0 /* OFF ON (never happens) */
#define LED_IRQSENABLED 0 /* OFF ON (never happens) */
#define LED_STACKCREATED 1 /* ON ON (never happens) */
#define LED_INIRQ 2 /* OFF NC (momentary) */
#define LED_SIGNAL 2 /* OFF NC (momentary) */
#define LED_ASSERTION 2 /* OFF NC (momentary) */
#define LED_PANIC 0 /* OFF ON (1Hz flashing) */
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1
#define GPIO_SSP1_SCK GPIO_SSP1_SCK_1
#define GPIO_SSP0_SCK GPIO_SSP0_SCK_1
#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_1
#define GPIO_SSP0_MISO GPIO_SSP0_MISO_1
#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_1
#define GPIO_UART1_TXD GPIO_UART1_TXD_1
#define GPIO_UART1_RXD GPIO_UART1_RXD_1
#define GPIO_UART1_CTS GPIO_UART1_CTS_1
#define GPIO_UART1_RTS GPIO_UART1_RTS_1
#define GPIO_UART1_DCD GPIO_UART1_DCD_1
#define GPIO_UART1_DSR GPIO_UART1_DSR_1
#define GPIO_UART1_DTR GPIO_UART1_DTR_1
#define GPIO_UART1_RI GPIO_UART1_RI_1
#define GPIO_UART2_TXD GPIO_UART2_TXD_1
#define GPIO_UART2_RXD GPIO_UART2_RXD_1
#define GPIO_UART3_TXD GPIO_UART3_TXD_3
#define GPIO_UART3_RXD GPIO_UART3_RXD_3
#define GPIO_ENET_MDC GPIO_ENET_MDC_1
#define GPIO_ENET_MDIO GPIO_ENET_MDIO_1
#define GPIO_PWM1p1 GPIO_PWM1p1_2
#define GPIO_PWM1p2 GPIO_PWM1p2_2
#define GPIO_PWM1p3 GPIO_PWM1p3_2
#define GPIO_PWM1p4 GPIO_PWM1p4_2
#define GPIO_PWM1p5 GPIO_PWM1p5_2
#define GPIO_PWM1p6 GPIO_PWM1p6_2
#endif /* __CONFIGS_U_BLOX_C027_INCLUDE_BOARD_H */
Reference in New Issue View Git Blame Copy Permalink