nuttx/boards/mips/pic32mz/flipnclick-pic32mz/scripts
Xiang Xiao e83c1400b6 build: Move BOARD_DIR definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 20:20:12 +01:00
..
c32-debug.ld boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes. 2019-09-16 08:14:32 -06:00
Make.defs build: Move BOARD_DIR definition to common place 2020-05-24 20:20:12 +01:00
mips-debug.ld boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes. 2019-09-16 08:14:32 -06:00
pinguino-debug.ld boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes. 2019-09-16 08:14:32 -06:00
xc32-debug.ld boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes. 2019-09-16 08:14:32 -06:00