sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
e91f97ada2
nuttx/configs/pic32-starterkit/include/board.h
patacongo 5cf0052be6 Finish coding of PIC32MX Ethernet driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4306 42af7a65-404d-4744-a932-0658087f49c3
2012-01-17 14:40:12 +00:00

222 lines
8.1 KiB
C
Raw Blame History

/****************************************************************************
* configs/pic32-starterkit/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H
#define __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdbool.h>
#endif
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Clocking *****************************************************************/
/* Crystal frequencies */
#define BOARD_POSC_FREQ 8000000 /* Primary OSC XTAL frequency (8MHz) */
#define BOARD_SOSC_FREQ 32768 /* Secondary OSC XTAL frequency (32.768KHz) */
/* PLL configuration and resulting CPU clock.
* CPU_CLOCK = ((POSC_FREQ / IDIV) * MULT) / ODIV
*/
#define BOARD_PLL_IDIV 2 /* PLL input divider */
#define BOARD_PLL_MULT 20 /* PLL multiplier */
#define BOARD_PLL_ODIV 1 /* PLL output divider */
#define BOARD_CPU_CLOCK 80000000 /* CPU clock (80MHz = 8MHz * 20 / 2) */
/* USB PLL configuration.
* USB_CLOCK = ((POSC_XTAL / IDIV) * 24) / 2
*/
#define BOARD_UPLL_IDIV 2 /* USB PLL divider (revisit) */
#define BOARD_USB_CLOCK 48000000 /* USB clock (8MHz / 2) * 24 / 2) */
/* Peripheral clock is divided down from CPU clock.
* PBCLOCK = CPU_CLOCK / PBDIV
*/
#define BOARD_PBDIV 2 /* Peripheral clock divisor (PBDIV) */
#define BOARD_PBCLOCK 40000000 /* Peripheral clock (PBCLK = 80MHz/2) */
/* Watchdog pre-scaler (re-visit) */
#define BOARD_WD_ENABLE 0 /* Watchdog is disabled */
#define BOARD_WD_PRESCALER 8 /* Watchdog pre-scaler */
/* Ethernet MII clocking.
*
* The clock divider used to create the MII Management Clock (MDC). The MIIM
* module uses the SYSCLK as an input clock. According to the IEEE 802.3
* Specification this should be no faster than 2.5 MHz. However, some PHYs
* support clock rates up to 12.5 MHz.
*/
#define BOARD_EMAC_MIIM_DIV 32 /* Ideal: 80MHz/32 = 2.5MHz */
/* LED definitions **********************************************************/
/* LED Configuration ********************************************************/
/* The PIC32MX Ethernet Starter kit has 3 user LEDs labeled LED1-3 on the
* board graphics (but referred to as LED4-6 in the schematic):
*
* PIN User's Guide Board Stencil Notes
* --- ------------- -------------- -------------------------
* RD0 "User LED D4" "LED1 (RD0") High illuminates (RED)
* RD2 "User LED D5" "LED3 (RD2)" High illuminates (YELLOW)
* RD1 "User LED D6" "LED2 (RD1)" High illuminates (GREEN)
*
* We will use the labels on the board to identify LEDs
*
* There are 5 additional LEDs available on the MEB (but not used by NuttX):
*
* RD1 LED1
* RD2 LED2
* RD3 LED3
* RC1 LED4
* RC2 LED5
*/
/* LED index values for use with pic32mx_setled() */
#define PIC32MX_STARTERKIT_LED1 0
#define PIC32MX_STARTERKIT_LED2 1
#define PIC32MX_STARTERKIT_LED3 2
#define PIC32MX_STARTERKIT_NLEDS 3
/* LED bits for use with pic32mx_setleds() */
#define PIC32MX_STARTERKIT_LED1_BIT (1 << PIC32MX_STARTERKIT_LED1)
#define PIC32MX_STARTERKIT_LED2_BIT (1 << PIC32MX_STARTERKIT_LED2)
#define PIC32MX_STARTERKIT_LED3_BIT (1 << PIC32MX_STARTERKIT_LED3)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 3 LEDs
* on board the Ethernet Starter Kit. The following definitions
* describe how NuttX controls the LEDs:
*
* ON OFF
* ------------------------- ---- ---- ---- ---- ---- ----
* LED1 LED2 LED3 LED1 LED2 LED3
* ------------------------- ---- ---- ---- ---- ---- ----
* LED_STARTED 0 OFF OFF OFF --- --- ---
* LED_HEAPALLOCATE 1 ON OFF N/C --- --- ---
* LED_IRQSENABLED 2 OFF ON N/C --- --- ---
* LED_STACKCREATED 3 ON ON N/C --- --- ---
* LED_INIRQ 4 N/C N/C ON N/C N/C OFF
* LED_SIGNAL 4 N/C N/C ON N/C N/C OFF
* LED_ASSERTION 4 N/C N/C ON N/C N/C OFF
* LED_PANIC 5 ON N/C N/C OFF N/C N/C
*/
#define LED_STARTED 0
#define LED_HEAPALLOCATE 1
#define LED_IRQSENABLED 2
#define LED_STACKCREATED 3
#define LED_INIRQ 4
#define LED_SIGNAL 4
#define LED_ASSERTION 4
#define LED_PANIC 5
#define LED_NVALUES 6
/* Switch definitions *******************************************************/
/* The PIC32 start kit has 3 switches:
*
* RD7 Switch SW2 (low when closed)
* RD6 Switch SW1 (low when closed)
* RD13 Switch SW3 (low when closed)
*/
/****************************************************************************
* Public Types
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Inline Functions
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: pic32mx_ledinit and pic32mx_setled
*
* Description:
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
* LEDs. If CONFIG_ARCH_LEDS is not defined, then the following interfaces
* are available to control the LEDs from user applicaitons.
*
****************************************************************************/
#ifndef CONFIG_ARCH_LEDS
EXTERN void pic32mx_ledinit(void);
#endif
#ifndef CONFIG_ARCH_LEDS
EXTERN void pic32mx_setled(int led, bool ledon);
#endif
#ifndef CONFIG_ARCH_LEDS
EXTERN void pic32mx_setleds(uint8_t ledset);
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H */
Reference in New Issue View Git Blame Copy Permalink