| .. |
|
analog
|
Driver for the 24-Bit Differential Input ADC ADS1242 that communicates via SPI with a MCU. Reading the ADC conversion result as well as configuring the ADC, setting the input channel, etc. is implemented via ioctl calls. However, it does not yet implement the standard ADC interface.
|
2016-01-29 07:41:23 -06:00 |
|
audio
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
|
binfmt
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
|
crypto
|
Add implementatino of Tiny Encryption Algorithm
|
2016-01-19 16:37:45 -06:00 |
|
eeprom
|
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
|
2014-12-05 09:13:34 -06:00 |
|
fs
|
I2C: Add an I2C character driver
|
2016-02-02 08:30:54 -06:00 |
|
i2c
|
I2C driver should support the RESET method as well
|
2016-02-03 07:32:25 -06:00 |
|
input
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
|
ioexpander
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
lcd
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
|
leds
|
RGB LED driver
|
2016-02-22 08:43:32 -06:00 |
|
mm
|
Add procfs/kmm to show the state of the kernel heap
|
2016-02-06 11:35:30 -06:00 |
|
modem
|
drivers/modem/u-blox.c and include/nuttx/drivers/u-blox.h: Add an upper half driver for the U-Blox Modem. From Vladimir Komendantskiy
|
2016-01-30 07:37:43 -06:00 |
|
mtd
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
net
|
nuttx/graphics and include: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-14 15:09:28 -06:00 |
|
nx
|
Implement anti-aliasing in the NuttX graphics line drawing
|
2015-07-14 10:17:42 -06:00 |
|
power
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
sensors
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
|
sercomm
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
|
serial
|
Implement high level DMA infrastructure for serial devices
|
2015-11-12 14:16:19 -06:00 |
|
spi
|
Remove the final vestiges of up_spiinitialize()
|
2016-01-27 09:27:56 -06:00 |
|
syslog
|
Clean up and review of header files for conformance to standards
|
2015-06-12 18:07:47 -06:00 |
|
timers
|
Add I2C frequency to the i2c_msg_s structure
|
2016-02-01 14:17:20 -06:00 |
|
usb
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:45:15 -06:00 |
|
video
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
wireless
|
Cosmetic changes from review of last pull request
|
2016-01-17 14:52:11 -06:00 |
|
.gitignore
|
|
|
|
addrenv.h
|
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
|
2014-09-24 07:29:09 -06:00 |
|
arch.h
|
SMP: Cosmetic renaming to clarify functionality of SMP interfaces. Update comments.
|
2016-02-17 13:36:25 -06:00 |
|
ascii.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
board.h
|
Add a command to boardctl() to obtain a baord unique ID
|
2015-11-18 07:31:53 -06:00 |
|
can.h
|
Update some comments
|
2016-01-18 16:27:46 -06:00 |
|
clock.h
|
Networking: Remove the HSEC argument from devif_timer.
|
2016-02-03 12:12:41 -06:00 |
|
compiler.h
|
compiler.h: Missing IOBJ/IPTR definitions for the ZDS-II toolchain
|
2016-01-31 12:44:44 -06:00 |
|
configdata.h
|
SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM
|
2015-03-19 14:53:05 -06:00 |
|
float.h
|
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
|
2015-09-01 13:52:29 -04:00 |
|
init.h
|
Update submodule; Improve some comments
|
2016-02-05 10:23:39 -06:00 |
|
irq.h
|
Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()
|
2016-02-14 16:19:15 -06:00 |
|
kmalloc.h
|
Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking
|
2016-02-16 19:33:22 -06:00 |
|
kthread.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
lib.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
math32.h
|
Add more 32-bit math operations; Update ChangeLog
|
2016-01-25 11:19:25 -06:00 |
|
math.h
|
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
|
2015-09-01 13:52:29 -04:00 |
|
mmcsd.h
|
Remove the final vestiges of up_spiinitialize()
|
2016-01-27 09:27:56 -06:00 |
|
module.h
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
|
mqueue.h
|
signals: Basic framework to support SIGEV_THREAD
|
2015-12-30 13:20:31 -06:00 |
|
page.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
pgalloc.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
poff.h
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
|
progmem.h
|
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
|
2015-11-12 13:40:18 -06:00 |
|
pthread.h
|
Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np().
|
2016-02-19 17:33:35 -06:00 |
|
pwm.h
|
PWM: Add support for multiple output channels per timer
|
2015-11-01 17:15:12 -05:00 |
|
regex.h
|
Standardize some header files
|
2015-02-16 14:29:43 -06:00 |
|
rwbuffer.h
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
|
sched.h
|
Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np().
|
2016-02-19 17:33:35 -06:00 |
|
scsi.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:26:01 -06:00 |
|
sdio.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:26:01 -06:00 |
|
semaphore.h
|
Update to use 64-bit timer when available
|
2016-01-21 11:54:26 -06:00 |
|
signal.h
|
signals: Adds a very limited, minimal implementation for SIGEV_THREAD
|
2015-12-30 15:01:14 -06:00 |
|
spawn.h
|
|
|
|
spinlock.h
|
Fix a typo introduced in the last commit and a file that was missed in the last commit
|
2016-02-19 16:03:01 -06:00 |
|
stdarg.h
|
Some typos noted by David Sidrane
|
2015-02-23 11:49:02 -06:00 |
|
streams.h
|
Introduce support for Atmel toolchain in-flash strings
|
2016-01-05 10:29:29 -06:00 |
|
symtab.h
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
|
time.h
|
Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.
|
2015-04-08 06:56:43 -06:00 |
|
tree.h
|
|
|
|
userspace.h
|
Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.
|
2015-07-10 08:37:02 -06:00 |
|
vt100.h
|
Add ANSI/VT100 color codes
|
2014-11-10 15:10:57 -06:00 |
|
wdog.h
|
The delay parameter has 'int' type while explicit int32_t is used in sigtimedwait() (sig_timedwait.c) This can lead to wrong argument for systems that have default int size different than int32 (namely AVR).
|
2016-01-05 07:58:04 -06:00 |
|
wqueue.h
|
Update to use 64-bit timer when available
|
2016-01-21 11:54:26 -06:00 |
