nuttx

History

cuiziwei 4ec7af779d nuttx/boards:init_array.* needs to be executed in order When I try to set priorities in certain programs, such as init_priority(HIGH_PRIORITY), I've noticed that during linking, there's no guarantee that the programs will be compiled in the sequence I've specified based on priority. This has led to some runtime errors in my program. I realized that in the ld file, when initializing dynamic arrays, there's no assurance of initializing init_array.* before init_array. This has resulted in runtime errors in the program. Consequently, I've rearranged the init_array.* in the ld file of NuttX to be placed before init_array and added a SORT operation to init_array.* to ensure accurate initialization based on priorities during linking.		2023-08-29 22:54:37 +08:00
..
configs	risc-v/litex: Add system reset and access to core control registers.	2023-08-25 17:16:28 +08:00
include
scripts	nuttx/boards:init_array.* needs to be executed in order	2023-08-29 22:54:37 +08:00
src	risc-v/litex: Add system reset and access to core control registers.	2023-08-25 17:16:28 +08:00
Kconfig	Kconfig: Simplify the conditional default statement	2023-07-16 14:39:20 -03:00
README.txt

README.txt

1. Download and install toolchain

  $ curl https://static.dev.sifive.com/dev-tools/riscv64-unknown-elf-gcc-8.3.0-2019.08.0-x86_64-linux-ubuntu14.tar.gz

2. Follow instruction on https://github.com/enjoy-digital/litex to build the vexriscv softcore fpga gateware
   and flash to arty_a7 board

  $ cd litex-boards/litex_boards/targets
  $ ./digilent_arty.py --with-ethernet --with-sdcard --uart-baudrate 1000000 --cpu-type=vexriscv --cpu-variant=secure --build --load --flash

3. Configure and build NuttX

  $ mkdir ./nuttx; cd ./nuttx
  $ git clone https://github.com/apache/nuttx.git nuttx
  $ git clone https://github.com/apache/nuttx-apps.git apps
  $ cd nuttx
  $ make distclean
  $ ./tools/configure.sh arty_a7:nsh
  $ make V=1

4. Setup tftp server on your laptop, copy nuttx.bin to your tftpboot directory and change its name to boot.bin

5. Setup the wire connection(uart and tftp) between your board and laptop

6. Run  $ minicom -b 1000000 /dev/ttyUSB1 (the default baudrate on litex vexriscv is 1e6)
   when you see the bios prompt "litex>", type "netboot" and enter soon comes the nsh prompt

7. TODO

  Support GPIO/SPI/I2C/RTC/WDT/PWM
  Support RISC-V User mode