sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ec193059c1
nuttx/configs/Kconfig

1724 lines
57 KiB
Plaintext
Raw Blame History

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
choice
prompt "Select target board"
default ARCH_BOARD_CUSTOM
---help---
Select the board hosting the architecture. You must first select the
exact MCU part number, then the boards supporting that part will
be available for selection. Use ARCH_BOARD_CUSTOM to create a new
board configuration.
config ARCH_BOARD_AMBER
bool "Amber Web Server"
depends on ARCH_CHIP_ATMEGA128
---help---
This is placeholder for the SoC Robotics Amber Web Server that is based
on the Atmel AVR ATMega128 MCU. There is not much there yet and what is
there is untested due to tool-related issues.
config ARCH_BOARD_ARDUINO_DUE
bool "Arduino Due"
depends on ARCH_CHIP_ATSAM3X8E
select ARCH_HAVE_LEDS
---help---
This options selects the Arduino DUE board featuring the Atmel
ATSAM3X8E MCU running at 84 MHz.
config ARCH_BOARD_AVR32DEV1
bool "Atmel AVR32DEV1 board"
depends on ARCH_CHIP_AT32UC3B0256
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a port of NuttX to the Atmel AVR32DEV1 board. That board is
based on the Atmel AT32UC3B0256 MCU and uses a specially patched
version of the GNU toolchain: The patches provide support for the
AVR32 family. That patched GNU toolchain is available only from the
Atmel website. STATUS: This port is functional but very basic. There
are configurations for NSH and the OS test.
config ARCH_BOARD_C5471EVM
bool "Spectrum Digital C5471 evaluation board"
depends on ARCH_CHIP_C5471
select ARCH_HAVE_LEDS
---help---
This is a port to the Spectrum Digital C5471 evaluation board. The
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*.
This port is complete and verified.
config ARCH_BOARD_CLOUDCTRL
bool "Darcy's CloudController stm32f10x board"
depends on ARCH_CHIP_STM32F107VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Small network relay development board. Based on the Shenzhou IV development
board design.
config ARCH_BOARD_COMPALE86
bool "Compal e86 phone"
depends on ARCH_CHIP_CALYPSO
---help---
This configuration enables board support for Compal e86 phone.
This port derives from the Compal E88 port and was provided by Craig
Comstock.
config ARCH_BOARD_COMPALE88
bool "Compal e88 phone"
depends on ARCH_CHIP_CALYPSO
---help---
This configuration enables board support for compal e88 phone.
This ports is based on patches contributed by Denis Carikli for both the
compal e99 and e88. The patches were made by Alan Carvalho de Assis and
Denis Carikli using the Stefan Richter's Osmocom-bb patches.
config ARCH_BOARD_COMPALE99
bool "Compal e99 phone"
depends on ARCH_CHIP_CALYPSO
---help---
This configuration enables board support for compal e88 and e99 phones.
This port is based on patches contributed by Denis Carikli for both the
compal e99 and e88. The patches were made by Alan Carvalho de Assis and
Denis Carikli using the Stefan Richter's Osmocom-bb patches.
config ARCH_BOARD_DEMOS92S12NEC64
bool "Freescale DMO9S12NE64 board"
depends on ARCH_CHIP_MCS92S12NEC64
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Freescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This
port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it
is code complete but has not yet been verified.
config ARCH_BOARD_DK_TM4C129X
bool "Tiva DK-TM4C129x Connected Development Kit"
depends on ARCH_CHIP_TM4C129XNC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Tiva DK-TM4C129x Connected Development Kit featuring the
TM4C129XNCZAD MCU.
config ARCH_BOARD_EA3131
bool "Embedded Artists EA3131 Development board"
depends on ARCH_CHIP_LPC3131
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Embedded Artists EA3131 Development board. This board is based on the
an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is complete and mature.
config ARCH_BOARD_EA3152
bool "Embedded Artists EA3152 Development board"
depends on ARCH_CHIP_LPC3152
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Embedded Artists EA3152 Development board. This board is based on the
an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is has not be exercised well, but since it is
a simple derivative of the ea3131, it should be fully functional.
config ARCH_BOARD_EAGLE100
bool "Micromint Eagle-100 Development board"
depends on ARCH_CHIP_LM3S6918
select ARCH_HAVE_LEDS
---help---
Micromint Eagle-100 Development board. This board is based on the
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
config ARCH_BOARD_EFM32G8XXSTK
bool "EFM32 Gecko Starter Kit"
depends on ARCH_CHIP_EFM32G890F128
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the EFM32 Gecko Starter Kit (EFM32-G8XX-STK).
config ARCH_BOARD_EFM32GG_STK3700
bool "EFM32 Giant Gecko Starter Kit"
depends on ARCH_CHIP_EFM32GG990F1024
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the EFM32 Giant Gecko Starter Kit (EFM32GG-STK3700).
config ARCH_BOARD_EKKLM3S9B96
bool "TI/Stellaris EKK-LM3S9B96"
depends on ARCH_CHIP_LM3S9B96
select ARCH_HAVE_LEDS
---help---
TI/Stellaris EKK-LM3S9B96 board. This board is based on the
an EKK-LM3S9B96 which is a Cortex-M3.
config ARCH_BOARD_EZ80F910200KITG
bool "ZiLOG ez80f910200kitg development kit"
depends on ARCH_CHIP_EZ80F91
select ARCH_HAVE_LEDS
---help---
ez80Acclaim! Microcontroller. This port use the ZiLOG ez80f910200kitg
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_EZ80F910200ZCO
bool "ZiLOG ez80f910200zco development kit"
depends on ARCH_CHIP_EZ80F91
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200zco
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_FIRE_STM32
bool "M3 Wildfire STM32 board"
depends on ARCH_CHIP_STM32F103VE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Support for the M3 Wildfire STM32 board. This board is based on the
STM32F103VET6 chip. See http://firestm32.taobao.com . Version 2
and 3 of the boards are supported but only version 2 has been
tested.
config ARCH_BOARD_FREEDOM_KL25Z
bool "Freescale Freedom KL25Z"
depends on ARCH_CHIP_MKL25Z128
select ARCH_HAVE_LEDS
---help---
This is the configuration for the Freescale Freedom KL25Z board. This
board has the K25Z120LE3AN chip with a built-in SDA debugger.
config ARCH_BOARD_FREEDOM_KL26Z
bool "Freescale Freedom KL26Z"
depends on ARCH_CHIP_MKL26Z128
select ARCH_HAVE_LEDS
---help---
This is the configuration for the Freescale Freedom KL26Z board. This
board has the K26Z128VLH4 chip with a built-in SDA debugger.
config ARCH_BOARD_HYMINI_STM32V
bool "HY-Mini STM32v board"
depends on ARCH_CHIP_STM32F103VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the HY-Mini STM32v board. This board is based on the
STM32F103VCT6 chip.
config ARCH_BOARD_LINCOLN60
bool "Micromint Lincoln 60 board"
depends on ARCH_CHIP_LPC1769
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Micromint Lincoln 60 board using the NXP LPC1769 MCU.
config ARCH_BOARD_KWIKSTIK_K40
bool "FreeScale KwikStik-K40 development board"
depends on ARCH_CHIP_MK40X256VLQ100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Kinetis K40 Cortex-M4 MCU. This port uses the FreeScale KwikStik-K40
development board.
config ARCH_BOARD_LM3S6432S2E
bool "Stellaris RDK-S2E Reference Design Kit"
depends on ARCH_CHIP_LM3S6432
select ARCH_HAVE_LEDS
---help---
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to
Serial module.
config ARCH_BOARD_LM3S6965EK
bool "Stellaris LM3S6965 Evaluation Kit"
depends on ARCH_CHIP_LM3S6965
select ARCH_HAVE_LEDS
---help---
Stellaris LM3S6965 Evaluation Kit. This board is based on the
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
config ARCH_BOARD_LM3S8962EK
bool "Stellaris LMS38962 Evaluation Kit"
depends on ARCH_CHIP_LM3S8962
select ARCH_HAVE_LEDS
---help---
Stellaris LMS38962 Evaluation Kit.
config ARCH_BOARD_LM4F120_LAUNCHPAD
bool "Stellaris LM4F120 LaunchPad"
depends on ARCH_CHIP_LM4F120
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Stellaris LM4F120 LaunchPad.
config ARCH_BOARD_LPCXPRESSO_LPC1115
bool "NXP LPCXpresso LPC1115"
depends on ARCH_CHIP_LPC1115
select ARCH_HAVE_LEDS
---help---
The Embedded Artists LPCXpresso LPC1115 board featuring the NXP
LPC1115 MCU.
config ARCH_BOARD_LPCXPRESSO
bool "NXP LPCExpresso LPC1768"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
Embedded Artists base board with NXP LPCExpresso LPC1768. This board
is based on the NXP LPC1768. The Code Red toolchain is used by default.
config ARCH_BOARD_LPC4330_XPLORER
bool "NXG LPC4330-Xplorer"
depends on ARCH_CHIP_LPC4330FET100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
NXG Technologies LPC4330 Xplorer board. This board is based on the
LPC4330FET100. The Code Red toolchain is used by default.
config ARCH_BOARD_LPC4357_EVB
bool "NXP LPC4357-EVB"
depends on ARCH_CHIP_LPC4357FET256
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
NXP Technologies LPC4357 EVB board. This board is based on the
LPC4357FET256.
config ARCH_BOARD_MBED
bool "mbed LCP1768"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
The configurations in this directory support the mbed board (http://mbed.org)
that features the NXP LPC1768 microcontroller. This OS is also built
with the arm-nuttx-elf toolchain*. STATUS: Contributed.
config ARCH_BOARD_MCU123_LPC214X
bool "mcu123.com LPC2148 Development Board"
depends on ARCH_CHIP_LPC214X
select ARCH_HAVE_LEDS
---help---
This port is for the NXP LPC2148 as provided on the mcu123.com
lpc214x development board. This OS is also built with the arm-nuttx-elf
toolchain*. The port supports serial, timer0, spi, and usb.
config ARCH_BOARD_MICROPENDOUS3
bool "Opendous Micropendous 3 board"
depends on ARCH_CHIP_AT90USB646 || ARCH_CHIP_AT90USB647 || ARCH_CHIP_AT90USB1286 || ARCH_CHIP_AT90USB1287
---help---
This is a port to the Opendous Micropendous 3 board. This board may
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU.
Support is configured for the AT90USB647.
config ARCH_BOARD_MOTEINO_MEGA
bool "LowPowerLab MoteinoMEGA"
depends on ARCH_CHIP_ATMEGA1284P
select ARCH_HAVE_LEDS
---help---
This is placeholder for the LowPowerLab MoteinoMEGA that is based
on the Atmel AVR ATMega1284P MCU. There is not much there yet and what is
there is untested due to tool-related issues.
config ARCH_BOARD_MX1ADS
bool "Motorola MX1ADS development board"
depends on ARCH_CHIP_IMX1
select ARCH_HAVE_LEDS
---help---
This is a port to the Motorola MX1ADS development board. That board
is based on the Freescale i.MX1 processor. The i.MX1 is an ARM920T.
STATUS: This port is nearly code complete but was never fully
integrated due to tool-related issues.
config ARCH_BOARD_NE64BADGE
bool "FEG NE64 /PoE Badge board"
depends on ARCH_CHIP_MCS92S12NEC64
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Future Electronics Group NE64 /PoE Badge board based on the
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain.
STATUS: Under development. The port is code-complete but has
not yet been fully tested.
config ARCH_BOARD_NTOSD_DM320
bool "Neuros OSD v1.0 Dev Board"
depends on ARCH_CHIP_DM320
select ARCH_HAVE_LEDS
---help---
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf
toolchain*: see
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home
There are some differences between the Dev Board and the currently
available commercial v1.0 Boards. See
http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1
NuttX operates on the ARM9EJS of this dual core processor.
STATUS: This port is code complete, verified, and included in the
NuttX 0.2.1 release.
config ARCH_BOARD_NUCLEUS2G
bool "Nucleus 2G board"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
This port uses the Nucleus 2G board (with Babel CAN board). This board
features an NXP LPC1768 processor. See the 2G website (http://www.2g-eng.com/)
for more information about the Nucleus 2G.
config ARCH_BOARD_LPC1766STK
bool "Olimex LPC1766-STK board"
depends on ARCH_CHIP_LPC1766
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under
Linux or Cygwin. STATUS: Complete and mature.
config ARCH_BOARD_MAPLE
bool "maple board"
depends on ARCH_CHIP_STM32F103RB || ARCH_CHIP_STM32F103CB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the LeafLab's Maple and Maple Mini boards.
These boards are based on the STM32F103RBT6 chip for the standard
version and on the STM32F103CBT6 for the mini version
(See http://leaflabs.com/docs/hardware/maple.html)
config ARCH_BOARD_MIRTOO
bool "Mirtoo PIC32 Module from Dimitech"
depends on ARCH_CHIP_PIC32MX250F128D
select ARCH_HAVE_LEDS
---help---
This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip
PIC32MX250F128D. See http://www.dimitech.com/ for further information.
config ARCH_BOARD_NUTINY_NUC120
bool "Nuvoton NuTiny NUC120"
depends on ARCH_CHIP_NUC120LE3AN
select ARCH_HAVE_LEDS
---help---
This is the port to the Nuvoton NuTiny EVB 120 board. This board uses a
Nuvoton NUC120 chip, specifically the NUC120LE3AN. See http://www.nuvoton.com/
for further information.
config ARCH_BOARD_OLIMEX_EFM32G880F128_STK
bool "Olimex EFM32G880F128 STK"
depends on ARCH_CHIP_EFM32G880F128
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects the Olimex EFM32G880F128 STK
config ARCH_BOARD_OLIMEXLPC2378
bool "Olimex-lpc2378 board"
depends on ARCH_CHIP_LPC2378
select ARCH_HAVE_LEDS
---help---
This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. STATUS: ostest and NSH configurations available.
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
config ARCH_BOARD_OLIMEX_LPC_H3131
bool "Olimex LPC-H3131 Development board"
depends on ARCH_CHIP_LPC3131
select ARCH_HAVE_LEDS
---help---
Olimex LPC-H3131 development board. This board is based on the the
NXP LPC3131 MCU.
config ARCH_BOARD_OLIMEX_STRP711
bool "Olimex STR-P711 board"
depends on ARCH_CHIP_STR71X
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
further information. STATUS: Configurations for the basic OS test and NSH
are complete and verified.
config ARCH_BOARD_OLIMEX_STM32H405
bool "Olimex STM32 H405 board"
depends on ARCH_CHIP_STM32F405RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 H405 board and a GNU arm-nuttx-elf
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F405RGT6
MCU.
config ARCH_BOARD_OLIMEX_STM32P107
bool "Olimex STM32 P107 board"
depends on ARCH_CHIP_STM32F107VC
---help---
This port uses the Olimex STM32 P107 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com for further information. This
board features the STMicro STM32F107VC MCU
config ARCH_BOARD_OLIMEX_STM32P207
bool "Olimex STM32 P207 board"
depends on ARCH_CHIP_STM32F207ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 P207 board and a GNU arm-nuttx-elf
toolchain under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F207ZE MCU
config ARCH_BOARD_OLIMEXINO_STM32
bool "Olimexino STM32 board"
depends on ARCH_CHIP_STM32F103RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimexino STM32 board and a GNU arm-nuttx-elf
toolchain under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F103RBT6 MCU.
Contribued by David Sidrane.
config ARCH_BOARD_OPEN1788
bool "Wave Share Open1788"
depends on ARCH_CHIP_LPC1788
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Wave Share Open1788 board. See the
http://wvshare.com/product/Open1788-Standard.htm for further
information. This board features the NXP LPC1788 MCU
config ARCH_BOARD_P112
bool "P112 Z180-based platform"
depends on ARCH_CHIP_Z8018216FSG
---help---
The P112 is notable because it was the first of the hobbyist single board
computers to reach the production stage. The P112 hobbyist computers
were relatively widespread and inspired other hobbyist centered home brew
computing projects such as N8VEM home brew computing project. The P112
project still maintains many devoted enthusiasts and has an online
repository of software and other information.
The P112 computer originated as a commercial product of "D-X Designs Pty
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
boards was discussed. David Griffith decided to produce additional P112 kits
with Dave Brooks blessing and the assistance of others. In addition Terry
Gulczynski makes additional P112 derivative hobbyist home brew computers.
Hal Bower was very active in the mid 1990's on the P112 project and ported
the "Banked/Portable BIOS".
config ARCH_BOARD_PCBLOGICPIC32MX
bool "PIC32MX board from PCB Logic Design Co"
depends on ARCH_CHIP_PIC32MX460F512L
---help---
This is the port of NuttX to the PIC32MX board from PCB Logic Design Co.
This board features the MicroChip PIC32MX460F512L.
The board is a very simple -- little more than a carrier for the PIC32
MCU plus voltage regulation, debug interface, and an OTG connector.
STATUS: Code complete but testing has been stalled due to tool related problems
(PICkit 2 does not work with the PIC32).
config ARCH_BOARD_PCDUINO_A10
bool "pcDuino A10"
depends on ARCH_CHIP_A10
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the port of NuttX to the Allwinner A10-based pcDuino v1
board. See http://www.pcduino.com/ for information about pcDuino Lite, v1,
and v2. I have not compared these boards in detail, but I believe that
the differences are cosmetic. This port was developed on the v1 board,
but the others may be compatible.
config ARCH_BOARD_PIC32MX_STARTERKIT
bool "Microchip PIC32MX Ethernet Starter Kit (DM320004)"
depends on ARCH_CHIP_PIC32MX795F512L
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the Microchip PIC32 Ethernet Starter Kit
(DM320004) with the Multimedia Expansion Board (MEB, DM320005).
See www.microchip.com for further information.
config ARCH_BOARD_PIC32MX7MMB
bool "Mikroelektronika PIC32MX7 MMB"
depends on ARCH_CHIP_PIC32MX795F512L
select ARCH_HAVE_LEDS
---help---
This is the port NuttX to the Mikroelektronika PIC32MX7 Multimedia Board
(MMB). See http://www.mikroe.com/ for further information.
config ARCH_BOARD_PIC32MZ_STARTERKIT
bool "Microchip PIC32MZ Ethernet Starter Kit ((DM320006)"
depends on ARCH_CHIP_PIC32MZ2048ECH || ARCH_CHIP_PIC32MZ2048ECM
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if PIC32MZ_GPIOIRQ_PORTB
---help---
This is the port of NuttX to the Microchip PIC32MZ Embedded
Connectivity (EC) Starter Kit. There are two configurations of the
starter kit:
1) The PIC32MZ Embedded Connectivity Starter Kit based on the
PIC32MZ2048ECH144-I/PH chip (DM320006), and
2) The PIC32MZ Embedded Connectivity Starter Kit based on the
PIC32MZ2048ECM144-I/PH w/Crypto Engine (DM320006-C)
See www.microchip.com for further information.
config ARCH_BOARD_PIRELLI_DPL10
bool "Pirelli DPL10 phone"
depends on ARCH_CHIP_CALYPSO
---help---
This directory contains the board support for Pirelli dpl10 phones. The
additions were made by Craig Comstock (with help form Alan Carvalho de Assis).
config ARCH_BOARD_NUCLEO_F401RE
bool "STM32F401 Nucleo F401RE"
depends on ARCH_CHIP_STM32F401RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F401RE in the NuttX source tree.
config ARCH_BOARD_NUCLEO_F411RE
bool "STM32F411 Nucleo F411RE"
depends on ARCH_CHIP_STM32F411RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F411RE in the NuttX source tree.
config ARCH_BOARD_QEMU_I486
bool "Qemu i486 Mode"
depends on ARCH_X86 || ARCH_I486
---help---
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
hardwared (Google the Bifferboard).
config ARCH_BOARD_RGMP
bool "RGMP"
depends on ARCH_RGMP
---help---
RGMP stands for RTOS and GPOS on Multi-Processor. RGMP is a project for
running GPOS and RTOS simultaneously on multi-processor platforms. You can
port your favorite RTOS to RGMP together with an unmodified Linux to form a
hybrid operating system. This makes your application able to use both RTOS
and GPOS features.
See http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further information
about RGMP.
config ARCH_BOARD_SAMA5D3X_EK
bool "Atmel SAMA5D3x-EK development board"
depends on ARCH_CHIP_ATSAMA5D31 || ARCH_CHIP_ATSAMA5D33 || ARCH_CHIP_ATSAMA5D34 || ARCH_CHIP_ATSAMA5D35
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAMA5D3x-EK development board (where x=1,3,4, or 5).
config ARCH_BOARD_SAMA5D3_XPLAINED
bool "Atmel SAMA5D3 Xplained development board"
depends on ARCH_CHIP_ATSAMA5D36
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAMA5D3 Xplained development board.
config ARCH_BOARD_SAMA5D4_EK
bool "Atmel SAMA5D4-EK development board"
depends on ARCH_CHIP_ATSAMA5D44
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAMA5D4-EK development board
config ARCH_BOARD_SAMD20_XPLAINED
bool "Atmel SAMD20-Xplained Pro development board"
depends on ARCH_CHIP_SAMD20J18
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMD20-Xplained Pro development board.
This board features the ATSAMD20J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAMD21_XPLAINED
bool "Atmel SAMD21-Xplained Pro development board"
depends on ARCH_CHIP_SAMD21J18A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMD21-Xplained Pro development board.
This board features the ATSAMD21J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAML21_XPLAINED
bool "Atmel SAML21-Xplained Pro development board"
depends on ARCH_CHIP_SAML21J18
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAML21-Xplained Pro development board.
This board features the ATSAML21J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAM3UEK
bool "Atmel SAM3U-EK development board"
depends on ARCH_CHIP_ATSAM3U4E
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM3U-EK development board.
config ARCH_BOARD_SAM4EEK
bool "Atmel SAM4E-EK development board"
depends on ARCH_CHIP_ATSAM4E16E
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAM4E-EK development board. This
board features the SAM4E16 MCU running at up to 120MHz.
config ARCH_BOARD_SAM4L_XPLAINED
bool "Atmel SAM4L-Xplained Pro development board"
depends on ARCH_CHIP_ATSAM4LC4C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4L-Xplained Pro development board.
config ARCH_BOARD_SAM4S_XPLAINED
bool "Atmel SAM4S-Xplained development board"
depends on ARCH_CHIP_ATSAM4S16C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4S-Xplained development board.
config ARCH_BOARD_SAM4S_XPLAINED_PRO
bool "Atmel SAM4S-Xplained Pro development board"
depends on ARCH_CHIP_ATSAM4SD32C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4S-Xplained Pro development board.
config ARCH_BOARD_SAMV71_XULT
bool "Atmel SAMV71 Xplained Ultra evalutation board"
depends on ARCH_CHIP_SAMV71Q21
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMV71 Xplained Ultra evalutation board.
config ARCH_BOARD_SHENZHOU
bool "Shenzhou STM32F107 board"
depends on ARCH_CHIP_STM32F107VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Shenzhou STM32 F107 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.armjishu.com for further information. This
board features the STMicro STM32F107VC MCU
config ARCH_BOARD_SKP16C26
bool "Renesas SKP16C26 StarterKit"
depends on ARCH_CHIP_M30262F8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port
uses the GNU m32c toolchain. STATUS: The port is complete but untested
due to issues with compiler internal errors.
config ARCH_BOARD_SPARK
bool "Spark Core"
depends on ARCH_CHIP_STM32F103CB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the Spark Core from Spark Devices
(http://www.spark.io). This board features the STM32103CBT6
MCU from STMicro.
config ARCH_BOARD_STM32_TINY
bool "STM32-Tiny board"
depends on ARCH_CHIP_STM32F103C8
select ARCH_HAVE_LEDS
---help---
A configuration for the STM32 Tiny board. This board is based on a
STM32F103C8T6 micro-controller chip, and is (always ?) bundled with
an nRF24L01+ wireless module.
config ARCH_BOARD_STM3210E_EVAL
bool "STMicro STM3210E-EVAL development board"
depends on ARCH_CHIP_STM32F103ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6
microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3
toolchain.
config ARCH_BOARD_STM3220G_EVAL
bool "STMicro STM3220G-EVAL development board"
depends on ARCH_CHIP_STM32F207IG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG
microcontroller (ARM Cortex-M3).
config ARCH_BOARD_STM3240G_EVAL
bool "STMicro STM3240G-EVAL development board"
depends on ARCH_CHIP_STM32F407IG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6
microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4
toolchain (such as CodeSourcery).
config ARCH_BOARD_STM32F3_DISCOVERY
bool "STMicro STM32F3-Discovery board"
depends on ARCH_CHIP_STM32F303VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F3-Discovery board based on the STMicro STM32F303VCT6 MCU.
config ARCH_BOARD_STM32F4_DISCOVERY
bool "STMicro STM32F4-Discovery board"
depends on ARCH_CHIP_STM32F407VG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F4-Discovery board based on the STMicro STM32F407VGT6 MCU.
config ARCH_BOARD_STM32F429I_DISCO
bool "STMicro STM32F429I-Discovery board"
depends on ARCH_CHIP_STM32F429Z
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU.
config ARCH_BOARD_STM32L_DISCOVERY
bool "STMicro STM32L-Discovery board"
depends on ARCH_CHIP_STM32L152RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L-Discovery board based on the STMicro STM32L152RB MCU.
config ARCH_BOARD_STM32VL_DISCOVERY
bool "STMicro STM32VL-Discovery board"
depends on ARCH_CHIP_STM32F100RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32VL-Discovery board based on the STMicro STM32F100RB MCU.
config ARCH_BOARD_MIKROE_STM32F4
bool "MikroElektronika Mikromedia for STM32F4 board"
depends on ARCH_CHIP_STM32F407VG
---help---
This is the port NuttX to the Mikroelektronika Mikromedia for STM32F4 Multimedia Board
(MMB). See http://www.mikroe.com/ for further information.
config ARCH_BOARD_SUREPIC32MX
bool "Sure PIC32MX boards"
depends on ARCH_CHIP_PIC32MX440F512H
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure
Electronics (http://www.sureelectronics.net/). This board features
the MicroChip PIC32MX440F512H. See also
http://www.sureelectronics.net/goods.php?id=1168 for further
information about the Sure DB-DP11215 board.
config ARCH_BOARD_TEENSY_20
bool "PJRC Teensy++ 2.0 board"
depends on ARCH_CHIP_AT90USB1286
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
on an Atmel AT90USB1286 MCU.
config ARCH_BOARD_TEENSY_3X
bool "PJRC Teensy++ 3.1 board"
depends on ARCH_CHIP_MK20DX256VLH7 || ARCH_CHIP_MK20DX128VLH5
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
on an Atmel AT90USB1286 MCU.
This is the port of NuttX to the Teensy-3.1 from PJRC
(https://www.pjrc.com/). The Teensy-3.1 features the Freescale
MK30DX256VLH7 chip (now NXP). The MK30DX256VLH7 is a 64-pin Cortex-M4
running at 72MHz. It has 256KiB of program FLASH memory and 64KiB of
SRAM. For more information about the Teensy 3.1, see
https://www.pjrc.com/teensy/teensy31.html
https://www.pjrc.com/store/teensy31.html
This board configuration can also be used with the older Teensy-3.0. The
Teensy-3.0 has the same schematic (although some pins are not used on the
Teensy-3.0). the primary difference is that the Teensy 3.0 has a
MK20DX128VLH5 with slightly less capability.
config ARCH_BOARD_TEENSY_LC
bool "Teensy LC"
depends on ARCH_CHIP_MKL25Z64
select ARCH_HAVE_LEDS
---help---
This is the configuration for the Teensy LC board.
See https://www.pjrc.com/teensy/teensyLC.html. The
Teensy LC is based on the Freescale KL25Z.
config ARCH_BOARD_TM4C123G_LAUNCHPAD
bool "Tiva TM4C123G LaunchPad"
depends on ARCH_CHIP_TM4C123GH6PMI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Tiva TM4C123G LaunchPad.
config ARCH_BOARD_TM4C1294_LAUNCHPAD
bool "Tiva EK-TM4C1294XL LaunchPad"
depends on ARCH_CHIP_TM4C1294NC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Tiva EK-TM4C1294XL LaunchPad.
config ARCH_BOARD_CC3200_LAUNCHPAD
bool "Tiva CC3200 Launchpad"
depends on ARCH_CHIP_CC3200
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select TIVA_BOARD_EARLYINIT
---help---
Tiva CC3200 Launchpad.
config ARCH_BOARD_TWR_K60N512
bool "FreeScale TWR-K60N512d evelopment board"
depends on ARCH_CHIP_MK60N512VMD100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512
development board.
config ARCH_BOARD_UBW32
bool "UBW32 v2.4 board from Sparkfun"
depends on ARCH_CHIP_PIC32MX460F512L
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the port to the Sparkfun UBW32 board. This port uses the original v2.4
board which is based on the MicroChip PIC32MX460F512L. See
http://www.sparkfun.com/products/8971. This older version has been replaced
with this board http://www.sparkfun.com/products/9713. See also
http://www.schmalzhaus.com/UBW32/.
config ARCH_BOARD_US7032EVB1
bool "Hitachi SH-1/US7032EVB1 board"
depends on ARCH_CHIP_SH7032
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
STATUS: Work has just began on this port.
config ARCH_BOARD_VIEWTOOL_STM32F107
bool "ViewTool STM32F103/F107"
depends on ARCH_CHIP_STM32F107VC || ARCH_CHIP_STM32F103VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This port uses the ViewTool STM32F103/F107 V1.2 board. This
board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
See http://www.viewtool.com/ for further information.
config ARCH_BOARD_VSN
bool "SOTEL NetClamps VSN sensor network platform"
depends on ARCH_CHIP_STM32F103RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_POWEROFF
---help---
ISOTEL NetClamps VSN V1.2 ready2go sensor network platform based on the
STMicro STM32F103RET6. Contributed by Uros Platise. See
http://isotel.eu/NetClamps/
config ARCH_BOARD_XTRS
bool "XTRS TRS80 Model 3 emulation"
depends on ARCH_CHIP_Z80
select ARCH_HAVE_UART
---help---
TRS80 Model 3. This port uses a vintage computer based on the Z80.
An emulator for this computer is available to run TRS80 programs on a
linux platform (http://www.tim-mann.org/xtrs.html).
config ARCH_BOARD_Z16F2800100ZCOG
bool "Zilog Z16F2800100ZCOG Development Kit"
depends on ARCH_CHIP_Z16F2811
select ARCH_HAVE_LEDS
---help---
z16f Microcontroller. This port use the ZiLIG z16f2800100zcog
development kit and the Zilog ZDS-II Windows command line tools. The
development environment is Cygwin under WinXP.
config ARCH_BOARD_Z80SIM
bool "Z80 Instruction Set Simulator"
depends on ARCH_CHIP_Z80
select ARCH_HAVE_UART
---help---
z80 Microcontroller. This port uses a Z80 instruction set simulator
called z80sim. This port also uses the SDCC toolchain
(http://sdcc.sourceforge.net/") (verified with version 2.6.0).
config ARCH_BOARD_Z8ENCORE000ZCO
bool "ZiLOG Z8ENCORE000ZCO Development Kit"
depends on ARCH_CHIP_Z8F6403
select ARCH_HAVE_LEDS
---help---
z8Encore! Microcontroller. This port use the ZiLOG Z8ENCORE000ZCO
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_Z8F64200100KIT
bool "ZiLOG Z8F64200100KIT Development Kit"
depends on ARCH_CHIP_Z8F6423
select ARCH_HAVE_LEDS
---help---
z8Encore! Microcontroller. This port use the Zilog Z8F64200100KIT
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_ZP214XPA
bool "The0.net LPC2148 Development Board"
depends on ARCH_CHIP_LPC214X
---help---
This port is for the NXP LPC2148 as provided on the The0.net
ZPA213X/4XPA development board. Includes support for the
UG-2864AMBAG01 OLED also from The0.net
config ARCH_BOARD_ZKITARM
bool "Zilogic ZKit-ARM-1769 Development Kit"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
Zilogic System's ARM development Kit, ZKIT-ARM-1769. This board is based
on the NXP LPC1769. The Nuttx Buildroot toolchain is used by default.
config ARCH_BOARD_SIM
bool "User mode simulation"
depends on ARCH_SIM
---help---
A user-mode port of NuttX to the x86 Linux/Cygwin platform is available.
The purpose of this port is primarily to support OS feature development.
This port does not support interrupts or a real timer (and hence no
round robin scheduler) Otherwise, it is complete.
config ARCH_BOARD_CUSTOM
bool "Custom development board"
---help---
Select this option if there is no directory for the board under configs/.
Don't see the board you want? You must first select the exact MCU part
number, then the boards supporting that part will be available for selection.
endchoice
if ARCH_BOARD_CUSTOM
menu "Custom Board Configuration"
config ARCH_BOARD_CUSTOM_DIR
string "Custom board directory"
depends on ARCH_BOARD_CUSTOM
---help---
If the custom board configuration is selected, then it is necessary
to also tell the build system where it can find the board directory
for the custom board.
In this case, the board directory is assume to lie outside the the
NuttX directory. The provided path must then be a full, absolute
path to some location outside of the NuttX source tree (like
"~/projects/myboard").
config BOARD_CRASHDUMP
bool "Enable Board level logging of crash dumps"
default n
---help---
If selected up_asseert will call out to board_crashdump, in the case
of an assertion failure, prior to calling exit. Or in the
case of a hardfault prior to looping indefinitely. board_crashdump
then has a chance to save the state of the machine.
The purpose of board_crashdump is to save as much information as it can
about the cause of the fault and then most likely reset the system.
N.B. There is limited system resources that can be used, who knows
what memory is trashed? So all we can expect to do is save the
"machine state" in a place where on the next reset can write it
to more sophisticated storage in a sane operating environment.
config BOARD_RESET_ON_CRASH
bool "Eanble Board Reset after the crashdump is saved"
default n
depends on BOARD_CRASHDUMP
---help---
If selected the board_crashdump should reset the machine after
saveing the state of the machine
config BOARD_CUSTOM_LEDS
bool "Custom board LEDs"
default n
select ARCH_HAVE_LEDS
select ARCH_LEDS
config BOARD_CUSTOM_BUTTONS
bool "Custom board buttons"
default n
select ARCH_HAVE_BUTTONS
select ARCH_BUTTONS
config BOARD_CUSTOM_IRQBUTTONS
bool "Custom Board IRQ buttons"
default n
depends on BOARD_CUSTOM_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_IRQBUTTONS
config BOARD_CUSTOM_INTERRUPT
bool "Custom board PHY interrupts"
default n
depends on NETDEVICES
select ARCH_PHY_INTERRUPT if NETDEVICES
endmenu # Custom Board Configuration
endif #ARCH_BOARD_CUSTOM
config ARCH_BOARD
string
default "amber" if ARCH_BOARD_AMBER
default "arduino-due" if ARCH_BOARD_ARDUINO_DUE
default "avr32dev1" if ARCH_BOARD_AVR32DEV1
default "c5471evm" if ARCH_BOARD_C5471EVM
default "cloudctrl" if ARCH_BOARD_CLOUDCTRL
default "compal_e86" if ARCH_BOARD_COMPALE86
default "compal_e88" if ARCH_BOARD_COMPALE88
default "compal_e99" if ARCH_BOARD_COMPALE99
default "demo9s12ne64" if ARCH_BOARD_DEMOS92S12NEC64
default "dk-tm4c129x" if ARCH_BOARD_DK_TM4C129X
default "ea3131" if ARCH_BOARD_EA3131
default "ea3152" if ARCH_BOARD_EA3152
default "eagle100" if ARCH_BOARD_EAGLE100
default "efm32-g8xx-stk" if ARCH_BOARD_EFM32G8XXSTK
default "efm32gg-stk3700" if ARCH_BOARD_EFM32GG_STK3700
default "ekk-lm3s9b96" if ARCH_BOARD_EKKLM3S9B96
default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG
default "ez80f910200zco" if ARCH_BOARD_EZ80F910200ZCO
default "fire-stm32v2" if ARCH_BOARD_FIRE_STM32
default "freedom-kl25z" if ARCH_BOARD_FREEDOM_KL25Z
default "freedom-kl26z" if ARCH_BOARD_FREEDOM_KL26Z
default "hymini-stm32v" if ARCH_BOARD_HYMINI_STM32V
default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40
default "lincoln60" if ARCH_BOARD_LINCOLN60
default "lm3s6432-s2e" if ARCH_BOARD_LM3S6432S2E
default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK
default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK
default "lm4f120-launchpad" if ARCH_BOARD_LM4F120_LAUNCHPAD
default "lpc4330-xplorer" if ARCH_BOARD_LPC4330_XPLORER
default "lpc4357-evb" if ARCH_BOARD_LPC4357_EVB
default "lpcxpresso-lpc1115" if ARCH_BOARD_LPCXPRESSO_LPC1115
default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO
default "maple" if ARCH_BOARD_MAPLE
default "mbed" if ARCH_BOARD_MBED
default "mcu123-lpc214x" if ARCH_BOARD_MCU123_LPC214X
default "micropendous3" if ARCH_BOARD_MICROPENDOUS3
default "mirtoo" if ARCH_BOARD_MIRTOO
default "moteino-mega" if ARCH_BOARD_MOTEINO_MEGA
default "mx1ads" if ARCH_BOARD_MX1ADS
default "ne64badge" if ARCH_BOARD_NE64BADGE
default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320
default "nucleus2g" if ARCH_BOARD_NUCLEUS2G
default "nutiny-nuc120" if ARCH_BOARD_NUTINY_NUC120
default "olimex-efm32g880f128-stk" if ARCH_BOARD_OLIMEX_EFM32G880F128_STK
default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
default "olimex-lpc-h3131" if ARCH_BOARD_OLIMEX_LPC_H3131
default "olimex-stm32-h405" if ARCH_BOARD_OLIMEX_STM32H405
default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107
default "olimex-stm32-p207" if ARCH_BOARD_OLIMEX_STM32P207
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
default "olimexino-stm32" if ARCH_BOARD_OLIMEXINO_STM32
default "open1788" if ARCH_BOARD_OPEN1788
default "p112" if ARCH_BOARD_P112
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
default "pcduino-a10" if ARCH_BOARD_PCDUINO_A10
default "pic32mx-starterkit" if ARCH_BOARD_PIC32MX_STARTERKIT
default "pic32mx7mmb" if ARCH_BOARD_PIC32MX7MMB
default "pic32mz-starterkit" if ARCH_BOARD_PIC32MZ_STARTERKIT
default "pirelli_dpl10" if ARCH_BOARD_PIRELLI_DPL10
default "nucleo-f4x1re" if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
default "qemu-i486" if ARCH_BOARD_QEMU_I486
default "rgmp" if ARCH_BOARD_RGMP
default "sama5d3x-ek" if ARCH_BOARD_SAMA5D3X_EK
default "sama5d3-xplained" if ARCH_BOARD_SAMA5D3_XPLAINED
default "sama5d4-ek" if ARCH_BOARD_SAMA5D4_EK
default "samd20-xplained" if ARCH_BOARD_SAMD20_XPLAINED
default "samd21-xplained" if ARCH_BOARD_SAMD21_XPLAINED
default "saml21-xplained" if ARCH_BOARD_SAML21_XPLAINED
default "sam3u-ek" if ARCH_BOARD_SAM3UEK
default "sam4e-ek" if ARCH_BOARD_SAM4EEK
default "sam4l-xplained" if ARCH_BOARD_SAM4L_XPLAINED
default "sam4s-xplained" if ARCH_BOARD_SAM4S_XPLAINED
default "sam4s-xplained-pro" if ARCH_BOARD_SAM4S_XPLAINED_PRO
default "samv71-xult" if ARCH_BOARD_SAMV71_XULT
default "shenzhou" if ARCH_BOARD_SHENZHOU
default "skp16c26" if ARCH_BOARD_SKP16C26
default "spark" if ARCH_BOARD_SPARK
default "stm32_tiny" if ARCH_BOARD_STM32_TINY
default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL
default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL
default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL
default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY
default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY
default "stm32f429i-disco" if ARCH_BOARD_STM32F429I_DISCO
default "stm32ldiscovery" if ARCH_BOARD_STM32L_DISCOVERY
default "stm32vldiscovery" if ARCH_BOARD_STM32VL_DISCOVERY
default "mikroe-stm32f4" if ARCH_BOARD_MIKROE_STM32F4
default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX
default "teensy-2.0" if ARCH_BOARD_TEENSY_20
default "teensy-3.x" if ARCH_BOARD_TEENSY_3X
default "teensy-lc" if ARCH_BOARD_TEENSY_LC
default "tm4c123g-launchpad" if ARCH_BOARD_TM4C123G_LAUNCHPAD
default "tm4c1294-launchpad" if ARCH_BOARD_TM4C1294_LAUNCHPAD
default "cc3200-launchpad" if ARCH_BOARD_CC3200_LAUNCHPAD
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512
default "ubw32" if ARCH_BOARD_UBW32
default "us7032evb1" if ARCH_BOARD_US7032EVB1
default "viewtool-stm32f107" if ARCH_BOARD_VIEWTOOL_STM32F107
default "vsn" if ARCH_BOARD_VSN
default "xtrs" if ARCH_BOARD_XTRS
default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG
default "z80sim" if ARCH_BOARD_Z80SIM
default "z8encore000zco" if ARCH_BOARD_Z8ENCORE000ZCO
default "z8f64200100kit" if ARCH_BOARD_Z8F64200100KIT
default "zp214xpa" if ARCH_BOARD_ZP214XPA
default "zkit-arm-1769" if ARCH_BOARD_ZKITARM
default "sim" if ARCH_BOARD_SIM
comment "Common Board Options"
config ARCH_HAVE_LEDS
bool
config ARCH_LEDS
bool "Board LED support"
default y
depends on ARCH_HAVE_LEDS
---help---
Use board LEDs to show NuttX execution status state. Unique to boards that have LEDs
config ARCH_HAVE_BUTTONS
bool
config ARCH_BUTTONS
bool "Board button support"
default n
depends on ARCH_HAVE_BUTTONS
---help---
"Support interfaces to use buttons provided by the board."
config ARCH_HAVE_IRQBUTTONS
bool
config ARCH_IRQBUTTONS
bool "Button interrupt support"
default n
depends on ARCH_BUTTONS && ARCH_HAVE_IRQBUTTONS
---help---
"Support interrupts on button presses and releases."
config NSH_MMCSDMINOR
int "MMC/SD minor number"
default 0
depends on NSH_LIBRARY && MMCSD
---help---
If board-specific NSH start-up logic needs to mount an MMC/SD device, then the setting should be provided to identify the MMC/SD minor device number (i.e., the N in /dev/mmcsdN). Default 0
config NSH_MMCSDSLOTNO
int "MMC/SD slot number"
default 0
depends on NSH_LIBRARY && MMCSD
---help---
If board-specific NSH start-up supports more than one MMC/SD slot, then this setting should be provided to indicate which slot should be used. Default: 0.
config NSH_MMCSDSPIPORTNO
int "MMC/SD SPI device number"
default 0
depends on NSH_LIBRARY && MMCSD && MMCSD_SPI
---help---
If board-specif NSH start-up logic will mount an SPI-based MMC/SD volume, then this setting may be needed to tell the board logic which SPI bus to use. Default: 0 (meaning is board-specific).
comment "Board-Specific Options"
if ARCH_BOARD_AMBER
source "configs/amber/Kconfig"
endif
if ARCH_BOARD_ARDUINO_DUE
source "configs/arduino-due/Kconfig"
endif
if ARCH_BOARD_AVR32DEV1
source "configs/avr32dev1/Kconfig"
endif
if ARCH_BOARD_C5471EVM
source "configs/c5471evm/Kconfig"
endif
if ARCH_BOARD_CLOUDCTRL
source "configs/cloudctrl/Kconfig"
endif
if ARCH_BOARD_COMPALE86
source "configs/compal_e86/Kconfig"
endif
if ARCH_BOARD_COMPALE88
source "configs/compal_e88/Kconfig"
endif
if ARCH_BOARD_COMPALE99
source "configs/compal_e99/Kconfig"
endif
if ARCH_BOARD_DEMOS92S12NEC64
source "configs/demo9s12ne64/Kconfig"
endif
if ARCH_BOARD_DK_TM4C129X
source "configs/dk-tm4c129x/Kconfig"
endif
if ARCH_BOARD_EA3131
source "configs/ea3131/Kconfig"
endif
if ARCH_BOARD_EA3152
source "configs/ea3152/Kconfig"
endif
if ARCH_BOARD_EAGLE100
source "configs/eagle100/Kconfig"
endif
if ARCH_BOARD_EFM32G8XXSTK
source "configs/efm32-g8xx-stk/Kconfig"
endif
if ARCH_BOARD_EFM32GG_STK3700
source "configs/efm32gg-stk3700/Kconfig"
endif
if ARCH_BOARD_EKKLM3S9B96
source "configs/ekk-lm3s9b96/Kconfig"
endif
if ARCH_BOARD_EZ80F910200KITG
source "configs/ez80f910200kitg/Kconfig"
endif
if ARCH_BOARD_EZ80F910200ZCO
source "configs/ez80f910200zco/Kconfig"
endif
if ARCH_BOARD_FIRE_STM32
source "configs/fire-stm32v2/Kconfig"
endif
if ARCH_BOARD_FREEDOM_KL25Z
source "configs/freedom-kl25z/Kconfig"
endif
if ARCH_BOARD_FREEDOM_KL26Z
source "configs/freedom-kl26z/Kconfig"
endif
if ARCH_BOARD_HYMINI_STM32V
source "configs/hymini-stm32v/Kconfig"
endif
if ARCH_BOARD_KWIKSTIK_K40
source "configs/kwikstik-k40/Kconfig"
endif
if ARCH_BOARD_LINCOLN60
source "configs/lincoln60/Kconfig"
endif
if ARCH_BOARD_LM3S6432S2E
source "configs/lm3s6432-s2e/Kconfig"
endif
if ARCH_BOARD_LM3S6965EK
source "configs/lm3s6965-ek/Kconfig"
endif
if ARCH_BOARD_LM3S8962EK
source "configs/lm3s8962-ek/Kconfig"
endif
if ARCH_BOARD_LM3S8962EK
source "configs/lm4f120-launchpad/Kconfig"
endif
if ARCH_BOARD_LPC4330_XPLORER
source "configs/lpc4330-xplorer/Kconfig"
endif
if ARCH_BOARD_LPC4357_EVB
source "configs/lpc4357-evb/Kconfig"
endif
if ARCH_BOARD_LPCXPRESSO
source "configs/lpcxpresso-lpc1768/Kconfig"
endif
if ARCH_BOARD_MAPLE
source "configs/maple/Kconfig"
endif
if ARCH_BOARD_MBED
source "configs/mbed/Kconfig"
endif
if ARCH_BOARD_MCU123_LPC214X
source "configs/mcu123-lpc214x/Kconfig"
endif
if ARCH_BOARD_MICROPENDOUS3
source "configs/micropendous3/Kconfig"
endif
if ARCH_BOARD_MIKROE_STM32F4
source "configs/mikroe-stm32f4/Kconfig"
endif
if ARCH_BOARD_MIRTOO
source "configs/mirtoo/Kconfig"
endif
if ARCH_BOARD_MOTEINO_MEGA
source "configs/moteino-mega/Kconfig"
endif
if ARCH_BOARD_MX1ADS
source "configs/mx1ads/Kconfig"
endif
if ARCH_BOARD_NE64BADGE
source "configs/ne64badge/Kconfig"
endif
if ARCH_BOARD_NTOSD_DM320
source "configs/ntosd-dm320/Kconfig"
endif
if ARCH_BOARD_NUCLEUS2G
source "configs/nucleus2g/Kconfig"
endif
if ARCH_BOARD_NUTINY_NUC120
source "configs/nutiny-nuc120/Kconfig"
endif
if ARCH_BOARD_OLIMEX_EFM32G880F128_STK
source "configs/olimex-efm32g880f128-stk/Kconfig"
endif
if ARCH_BOARD_LPC1766STK
source "configs/olimex-lpc1766stk/Kconfig"
endif
if ARCH_BOARD_OLIMEXLPC2378
source "configs/olimex-lpc2378/Kconfig"
endif
if ARCH_BOARD_OLIMEX_LPC_H3131
source "configs/olimex-lpc-h3131/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32H405
source "configs/olimex-stm32-h405/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32P107
source "configs/olimex-stm32-p107/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32P207
source "configs/olimex-stm32-p207/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STRP711
source "configs/olimex-strp711/Kconfig"
endif
if ARCH_BOARD_OLIMEXINO_STM32
source "configs/olimexino-stm32/Kconfig"
endif
if ARCH_BOARD_OPEN1788
source "configs/open1788/Kconfig"
endif
if ARCH_BOARD_PCBLOGICPIC32MX
source "configs/pcblogic-pic32mx/Kconfig"
endif
if ARCH_BOARD_PCDUINO_A10
source "configs/pcduino-a10/Kconfig"
endif
if ARCH_BOARD_PIC32MX_STARTERKIT
source "configs/pic32mx-starterkit/Kconfig"
endif
if ARCH_BOARD_PIC32MX7MMB
source "configs/pic32mx7mmb/Kconfig"
endif
if ARCH_BOARD_PIC32MZ_STARTERKIT
source "configs/pic32mz-starterkit/Kconfig"
endif
if ARCH_BOARD_PIRELLI_DPL10
source "configs/pirelli_dpl10/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
source "configs/nucleo-f4x1re/Kconfig"
endif
if ARCH_BOARD_QEMU_I486
source "configs/qemu-i486/Kconfig"
endif
if ARCH_BOARD_RGMP
source "configs/rgmp/Kconfig"
endif
if ARCH_BOARD_SAMA5D3X_EK
source "configs/sama5d3x-ek/Kconfig"
endif
if ARCH_BOARD_SAMA5D3_XPLAINED
source "configs/sama5d3-xplained/Kconfig"
endif
if ARCH_BOARD_SAMA5D4_EK
source "configs/sama5d4-ek/Kconfig"
endif
if ARCH_BOARD_SAMD20_XPLAINED
source "configs/samd20-xplained/Kconfig"
endif
if ARCH_BOARD_SAMD21_XPLAINED
source "configs/samd21-xplained/Kconfig"
endif
if ARCH_BOARD_SAML21_XPLAINED
source "configs/saml21-xplained/Kconfig"
endif
if ARCH_BOARD_SAM3UEK
source "configs/sam3u-ek/Kconfig"
endif
if ARCH_BOARD_SAM4EEK
source "configs/sam4e-ek/Kconfig"
endif
if ARCH_BOARD_SAM4L_XPLAINED
source "configs/sam4l-xplained/Kconfig"
endif
if ARCH_BOARD_SAM4S_XPLAINED
source "configs/sam4s-xplained/Kconfig"
endif
if ARCH_BOARD_SAM4S_XPLAINED_PRO
source "configs/sam4s-xplained-pro/Kconfig"
endif
if ARCH_BOARD_SAMV71_XULT
source "configs/samv71-xult/Kconfig"
endif
if ARCH_BOARD_SHENZHOU
source "configs/shenzhou/Kconfig"
endif
if ARCH_BOARD_SKP16C26
source "configs/skp16c26/Kconfig"
endif
if ARCH_BOARD_SPARK
source "configs/spark/Kconfig"
endif
if ARCH_BOARD_STM32_TINY
source "configs/stm32_tiny/Kconfig"
endif
if ARCH_BOARD_STM3210E_EVAL
source "configs/stm3210e-eval/Kconfig"
endif
if ARCH_BOARD_STM3220G_EVAL
source "configs/stm3220g-eval/Kconfig"
endif
if ARCH_BOARD_STM3240G_EVAL
source "configs/stm3240g-eval/Kconfig"
endif
if ARCH_BOARD_STM32F4_DISCOVERY
source "configs/stm32f4discovery/Kconfig"
endif
if ARCH_BOARD_STM32F429I_DISCO
source "configs/stm32f429i-disco/Kconfig"
endif
if ARCH_BOARD_STM32L_DISCOVERY
source "configs/stm32ldiscovery/Kconfig"
endif
if ARCH_BOARD_STM32VL_DISCOVERY
source "configs/stm32vldiscovery/Kconfig"
endif
if ARCH_BOARD_SUREPIC32MX
source "configs/sure-pic32mx/Kconfig"
endif
if ARCH_BOARD_TEENSY_20
source "configs/teensy-2.0/Kconfig"
endif
if ARCH_BOARD_TEENSY_3X
source "configs/teensy-3.x/Kconfig"
endif
if ARCH_BOARD_TEENSY_LC
source "configs/teensy-lc/Kconfig"
endif
if ARCH_BOARD_TM4C123G_LAUNCHPAD
source "configs/tm4c123g-launchpad/Kconfig"
endif
if ARCH_BOARD_TM4C1294_LAUNCHPAD
source "configs/tm4c1294-launchpad/Kconfig"
endif
if ARCH_BOARD_CC3200_LAUNCHPAD
source "configs/cc3200-launchpad/Kconfig"
endif
if ARCH_BOARD_TWR_K60N512
source "configs/twr-k60n512/Kconfig"
endif
if ARCH_BOARD_UBW32
source "configs/ubw32/Kconfig"
endif
if ARCH_BOARD_US7032EVB1
source "configs/us7032evb1/Kconfig"
endif
if ARCH_BOARD_VIEWTOOL_STM32F107
source "configs/viewtool-stm32f107/Kconfig"
endif
if ARCH_BOARD_VSN
source "configs/vsn/Kconfig"
endif
if ARCH_BOARD_XTRS
source "configs/xtrs/Kconfig"
endif
if ARCH_BOARD_Z16F2800100ZCOG
source "configs/z16f2800100zcog/Kconfig"
endif
if ARCH_BOARD_Z80SIM
source "configs/z80sim/Kconfig"
endif
if ARCH_BOARD_Z8ENCORE000ZCO
source "configs/z8encore000zco/Kconfig"
endif
if ARCH_BOARD_Z8F64200100KIT
source "configs/z8f64200100kit/Kconfig"
endif
if ARCH_BOARD_ZP214XPA
source "configs/zp214xpa/Kconfig"
endif
if ARCH_BOARD_ZKITARM
source "configs/zkit-arm-1769/Kconfig"
endif
if ARCH_BOARD_SIM
source "configs/sim/Kconfig"
endif
config LIB_BOARDCTL
bool "Enable boardctl() interface"
default n
---help---
Enables support for the boardctl() interface. Architecture
specific logic must provide board_app_initialize() interface.
if LIB_BOARDCTL
config BOARDCTL_POWEROFF
bool "Enable power off command"
default n
depends on ARCH_HAVE_POWEROFF
---help---
Enables support for the BOARDIOC_POWEROFF boardctl() command.
Architecture specific logic must provide board_power_off()
interface.
config BOARDCTL_TSCTEST
bool "Enable touchscreen test interfaces"
default n
---help---
Enables support for the BOARDIOC_TSCTEST_SETUP and
BOARDIOC_TSCTEST_TEARDOWN boardctl() commands. Architecture
specific logic must provide board_tsc_setup() and
board_tsc_teardown() interfaces.
config BOARDCTL_ADCTEST
bool "Enable ADC test interfaces"
default n
---help---
Enables support for the BOARDIOC_ADCTEST_SETUP boardctl() command.
Architecture specific logic must provide board_adc_setup()
interface.
config BOARDCTL_PWMTEST
bool "Enable PWM test interfaces"
default n
---help---
Enables support for the BOARDIOC_PWMTEST_SETUP boardctl() command.
Architecture specific logic must provide board_pwm_setup()
interface.
config BOARDCTL_GRAPHICS
bool "Enable custom graphics initialization interfaces"
default n
---help---
Enables support for the BOARDIOC_GRAPHICS_SETUP boardctl() command.
Architecture specific logic must provide board_graphics_setup()
interface.
config BOARDCTL_IOCTL
bool "Board-specific boardctl() commands"
default n
---help---
Enables support for the BOARDIOC_POWEROFF boardctl() command.
Architecture specific logic must provide board_ioctl() interface.
endif # LIB_BOARDCTL
Reference in New Issue View Git Blame Copy Permalink