8bd9cfe038
arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything."
arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
378 lines
12 KiB
C
378 lines
12 KiB
C
/****************************************************************************
|
|
* arch/arm/src/kinetis/kinetis_start.c
|
|
*
|
|
* Copyright (C) 2011-2012, 2018 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <stdint.h>
|
|
#include <assert.h>
|
|
#include <debug.h>
|
|
|
|
#include <nuttx/init.h>
|
|
|
|
#include "up_arch.h"
|
|
#include "up_internal.h"
|
|
|
|
#include "kinetis.h"
|
|
#include "chip/kinetis_smc.h"
|
|
#include "kinetis_mpuinit.h"
|
|
#include "kinetis_userspace.h"
|
|
|
|
#ifdef CONFIG_ARCH_FPU
|
|
# include "nvic.h"
|
|
#endif
|
|
|
|
#include "kinetis_start.h"
|
|
|
|
/****************************************************************************
|
|
* Private Function prototypes
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_ARCH_FPU
|
|
static inline void kinetis_fpuconfig(void);
|
|
#endif
|
|
|
|
#if 0 /* Not used */
|
|
#ifdef CONFIG_STACK_COLORATION
|
|
static void go_os_start(void *pv, unsigned int nbytes)
|
|
__attribute__ ((naked, no_instrument_function, noreturn));
|
|
#endif
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
/* Memory Map ***************************************************************/
|
|
/*
|
|
* 0x0000:0000 - Beginning of the internal FLASH. Address of vectors.
|
|
* Mapped as boot memory address 0x0000:0000 at reset.
|
|
* 0x07ff:ffff - End of flash region (assuming the max of 2MiB of FLASH).
|
|
* 0x1fff:0000 - Start of internal SRAM and start of .data (_sdata)
|
|
* - End of .data (_edata) and start of .bss (_sbss)
|
|
* - End of .bss (_ebss) and bottom of idle stack
|
|
* - _ebss + CONFIG_IDLETHREAD_STACKSIZE = end of idle stack,
|
|
* start of heap. NOTE that the ARM uses a decrement before
|
|
* store stack so that the correct initial value is the end of
|
|
* the stack + 4;
|
|
* 0x2002:ffff - End of internal SRAM and end of heap.
|
|
*
|
|
* NOTE: ARM EABI requires 64 bit stack alignment.
|
|
*/
|
|
|
|
#define IDLE_STACKSIZE (CONFIG_IDLETHREAD_STACKSIZE & ~7)
|
|
#define IDLE_STACK ((uintptr_t)&_ebss + IDLE_STACKSIZE)
|
|
#define HEAP_BASE ((uintptr_t)&_ebss + IDLE_STACKSIZE)
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
/* g_idle_topstack: _sbss is the start of the BSS region as defined by the
|
|
* linker script. _ebss lies at the end of the BSS region. The idle task
|
|
* stack starts at the end of BSS and is of size CONFIG_IDLETHREAD_STACKSIZE.
|
|
* The IDLE thread is the thread that the system boots on and, eventually,
|
|
* becomes the IDLE, do nothing task that runs only when there is nothing
|
|
* else to run. The heap continues from there until the end of memory.
|
|
* g_idle_topstack is a read-only variable the provides this computed
|
|
* address.
|
|
*/
|
|
|
|
const uintptr_t g_idle_topstack = HEAP_BASE;
|
|
|
|
/****************************************************************************
|
|
* Private Data
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Private Functions
|
|
****************************************************************************/
|
|
|
|
|
|
#ifdef CONFIG_ARMV7M_STACKCHECK
|
|
/* we need to get r10 set before we can allow instrumentation calls */
|
|
|
|
void __start(void) __attribute__ ((no_instrument_function));
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: kinetis_fpuconfig
|
|
*
|
|
* Description:
|
|
* Configure the FPU. Relative bit settings:
|
|
*
|
|
* CPACR: Enables access to CP10 and CP11
|
|
* CONTROL.FPCA: Determines whether the FP extension is active in the
|
|
* current context:
|
|
* FPCCR.ASPEN: Enables automatic FP state preservation, then the
|
|
* processor sets this bit to 1 on successful completion of any FP
|
|
* instruction.
|
|
* FPCCR.LSPEN: Enables lazy context save of FP state. When this is
|
|
* done, the processor reserves space on the stack for the FP state,
|
|
* but does not save that state information to the stack.
|
|
*
|
|
* Software must not change the value of the ASPEN bit or LSPEN bit while either:
|
|
* - the CPACR permits access to CP10 and CP11, that give access to the FP
|
|
* extension, or
|
|
* - the CONTROL.FPCA bit is set to 1
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_ARCH_FPU
|
|
#ifndef CONFIG_ARMV7M_LAZYFPU
|
|
|
|
static inline void kinetis_fpuconfig(void)
|
|
{
|
|
uint32_t regval;
|
|
|
|
/* Set CONTROL.FPCA so that we always get the extended context frame
|
|
* with the volatile FP registers stacked above the basic context.
|
|
*/
|
|
|
|
regval = getcontrol();
|
|
regval |= (1 << 2);
|
|
setcontrol(regval);
|
|
|
|
/* Ensure that FPCCR.LSPEN is disabled, so that we don't have to contend
|
|
* with the lazy FP context save behavior. Clear FPCCR.ASPEN since we
|
|
* are going to turn on CONTROL.FPCA for all contexts.
|
|
*/
|
|
|
|
regval = getreg32(NVIC_FPCCR);
|
|
regval &= ~((1 << 31) | (1 << 30));
|
|
putreg32(regval, NVIC_FPCCR);
|
|
|
|
/* Enable full access to CP10 and CP11 */
|
|
|
|
regval = getreg32(NVIC_CPACR);
|
|
regval |= ((3 << (2*10)) | (3 << (2*11)));
|
|
putreg32(regval, NVIC_CPACR);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void kinetis_fpuconfig(void)
|
|
{
|
|
uint32_t regval;
|
|
|
|
/* Clear CONTROL.FPCA so that we do not get the extended context frame
|
|
* with the volatile FP registers stacked in the saved context.
|
|
*/
|
|
|
|
regval = getcontrol();
|
|
regval &= ~(1 << 2);
|
|
setcontrol(regval);
|
|
|
|
/* Ensure that FPCCR.LSPEN is disabled, so that we don't have to contend
|
|
* with the lazy FP context save behavior. Clear FPCCR.ASPEN since we
|
|
* are going to keep CONTROL.FPCA off for all contexts.
|
|
*/
|
|
|
|
regval = getreg32(NVIC_FPCCR);
|
|
regval &= ~((1 << 31) | (1 << 30));
|
|
putreg32(regval, NVIC_FPCCR);
|
|
|
|
/* Enable full access to CP10 and CP11 */
|
|
|
|
regval = getreg32(NVIC_CPACR);
|
|
regval |= ((3 << (2*10)) | (3 << (2*11)));
|
|
putreg32(regval, NVIC_CPACR);
|
|
}
|
|
|
|
#endif
|
|
|
|
#else
|
|
# define kinetis_fpuconfig()
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: go_os_start
|
|
*
|
|
* Description:
|
|
* Set the IDLE stack to the
|
|
*
|
|
****************************************************************************/
|
|
|
|
#if 0 /* Not used */
|
|
#ifdef CONFIG_STACK_COLORATION
|
|
static void go_os_start(void *pv, unsigned int nbytes)
|
|
{
|
|
/* Set the IDLE stack to the stack coloration value then jump to
|
|
* os_start(). We take extreme care here because were currently
|
|
* executing on this stack.
|
|
*
|
|
* We want to avoid sneak stack access generated by the compiler.
|
|
*/
|
|
|
|
__asm__ __volatile__
|
|
(
|
|
"\tmovs r1, r1, lsr #2\n" /* R1 = nwords = nbytes >> 2 */
|
|
"\tbeq 2f\n" /* (should not happen) */
|
|
|
|
"\tbic r0, r0, #3\n" /* R0 = Aligned stackptr */
|
|
"\tmovw r2, #0xbeef\n" /* R2 = STACK_COLOR = 0xdeadbeef */
|
|
"\tmovt r2, #0xdead\n"
|
|
|
|
"1:\n" /* Top of the loop */
|
|
"\tsub r1, r1, #1\n" /* R1 nwords-- */
|
|
"\tcmp r1, #0\n" /* Check (nwords == 0) */
|
|
"\tstr r2, [r0], #4\n" /* Save stack color word, increment stackptr */
|
|
"\tbne 1b\n" /* Bottom of the loop */
|
|
|
|
"2:\n"
|
|
"\tmov r14, #0\n" /* LR = return address (none) */
|
|
"\tb os_start\n" /* Branch to os_start */
|
|
);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: _start
|
|
*
|
|
* Description:
|
|
* This is the reset entry point.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void __start(void)
|
|
{
|
|
const uint32_t *src;
|
|
uint32_t *dest;
|
|
|
|
#ifdef CONFIG_ARMV7M_STACKCHECK
|
|
/* Set the stack limit before we attempt to call any functions */
|
|
|
|
__asm__ volatile ("sub r10, sp, %0" : : "r" (CONFIG_IDLETHREAD_STACKSIZE - 64) : );
|
|
#endif
|
|
|
|
/* Disable the watchdog timer */
|
|
|
|
kinetis_wddisable();
|
|
|
|
/* Clear .bss. We'll do this inline (vs. calling memset) just to be
|
|
* certain that there are no issues with the state of global variables.
|
|
*/
|
|
|
|
for (dest = &_sbss; dest < &_ebss; )
|
|
{
|
|
*dest++ = 0;
|
|
}
|
|
|
|
/* Move the initialized data section from his temporary holding spot in
|
|
* FLASH into the correct place in SRAM. The correct place in SRAM is
|
|
* give by _sdata and _edata. The temporary location is in FLASH at the
|
|
* end of all of the other read-only data (.text, .rodata) at _eronly.
|
|
*/
|
|
|
|
for (src = &_eronly, dest = &_sdata; dest < &_edata; )
|
|
{
|
|
*dest++ = *src++;
|
|
}
|
|
|
|
/* Copy any necessary code sections from FLASH to RAM. The correct
|
|
* destination in SRAM is given by _sramfuncs and _eramfuncs. The
|
|
* temporary location is in flash after the data initialization code
|
|
* at _framfuncs
|
|
*/
|
|
|
|
#ifdef CONFIG_ARCH_RAMFUNCS
|
|
for (src = &_framfuncs, dest = &_sramfuncs; dest < &_eramfuncs; )
|
|
{
|
|
*dest++ = *src++;
|
|
}
|
|
#endif
|
|
|
|
/* Perform clock and Kinetis module initialization (This depends on
|
|
* RAM functions having been copied to RAM).
|
|
*/
|
|
|
|
kinetis_clockconfig();
|
|
|
|
/* Configure the uart and perform early serial initialization so that we
|
|
* can get debug output as soon as possible (This depends on clock
|
|
* configuration).
|
|
*/
|
|
|
|
kinetis_fpuconfig();
|
|
kinetis_lowsetup();
|
|
#ifdef USE_EARLYSERIALINIT
|
|
kinetis_earlyserialinit();
|
|
#endif
|
|
|
|
/* For the case of the separate user-/kernel-space build, perform whatever
|
|
* platform specific initialization of the user memory is required.
|
|
* Normally this just means initializing the user space .data and .bss
|
|
* segments.
|
|
*/
|
|
|
|
#ifdef CONFIG_BUILD_PROTECTED
|
|
kinetis_userspace();
|
|
#else
|
|
# ifdef KINETIS_MPU
|
|
/* Disable the MPU so that all master may access all buses */
|
|
|
|
kinetis_mpudisable();
|
|
# endif
|
|
#endif
|
|
|
|
/* Initialize other on-board resources */
|
|
|
|
kinetis_boardinitialize();
|
|
|
|
/* Show reset status */
|
|
|
|
_warn("Reset status: %02x:%02x\n",
|
|
getreg8(KINETIS_SMC_SRSH), getreg8(KINETIS_SMC_SRSL));
|
|
|
|
/* Then start NuttX */
|
|
|
|
os_start();
|
|
|
|
/* Shouldn't get here */
|
|
|
|
for (; ; );
|
|
}
|