nuttx

History

Masayuki Ishikawa 40eb87d8b4 boards: maix-bit: Update instructions for kostest Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>		2020-04-22 13:45:56 +08:00
..
configs	Update defconfig per refresh.sh report	2020-04-20 07:07:32 -06:00
include	Remove exra whitespace from files (#189 )	2020-01-31 09:24:49 -06:00
kernel	Revert "Don't generate .depend anymore"	2020-03-22 23:07:29 -05:00
scripts	Use EXTRAFLAGS instead of EXTRADEFINES to be used by make via command line	2020-04-11 08:31:08 -06:00
src	Run codespell -w with the latest dictonary again	2020-02-23 22:27:46 +01:00
Kconfig
README-qemu.txt	boards: maix-bit: Update instructions for kostest	2020-04-22 13:45:56 +08:00
README.txt

README.txt

1. Download and install toolchain and openocd-k210

  $ curl https://static.dev.sifive.com/dev-tools/riscv64-unknown-elf-gcc-8.3.0-2019.08.0-x86_64-linux-ubuntu14.tar.gz

2. Build openocd-k210

  $ git clone https://github.com/kendryte/openocd-kendryte
  $ cd openocd-kendryte
  $ ./bootstrap & ./configure & make

3. Configure and build NuttX

  $ mkdir ./nuttx; cd ./nuttx
  $ git clone https://bitbucket.org/nuttx/nuttx.git
  $ git clone https://bitbucket.org/nuttx/apps.git
  $ cd nuttx
  $ make distclean
  $ ./tools/configure.sh maix-bit:nsh
  $ make V=1

4. Download and run the nuttx from SRAM (not SPI-Flash)

  $ picocom -b 115200 /dev/ttyUSB0
  $ sudo ./src/openocd -s ./tcl -f ./tcl/kendryte.cfg -m 0
  $ riscv64-unknown-elf-gdb ./nuttx
  (gdb) target extended-remote :3333
  (gdb) load nuttx
  (gdb) c

5. TODO

  PLL setting (currently CPU clock freq is assumed to be 416MHz)
  Boot from SPI-Flash
  Support peripherals such as GPIO/SPI/I2C/...
  Support FPU
  Support RISC-V User mode