1d1bdd85a3
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
112 lines
4.0 KiB
Plaintext
112 lines
4.0 KiB
Plaintext
/****************************************************************************
|
|
* boards/xtensa/esp32s3/esp32s3-devkit/scripts/esp32s3.template.ld
|
|
* ESP32-S3 Linker Script Memory Layout
|
|
*
|
|
* This file describes the memory layout (memory blocks) as virtual
|
|
* memory addresses.
|
|
*
|
|
* esp32s3.common.ld contains output sections to link compiler output
|
|
* into these memory blocks.
|
|
*
|
|
* NOTE: That this is not the actual linker script but rather a "template"
|
|
* for the elf32_out.ld script. This template script is passed through
|
|
* the C preprocessor to include selected configuration options.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#define SRAM_IRAM_START 0x40370000
|
|
#define SRAM_DIRAM_I_START 0x40378000
|
|
#define SRAM_IRAM_END 0x403ba000
|
|
#define I_D_SRAM_OFFSET (SRAM_DIRAM_I_START - SRAM_DRAM_START)
|
|
|
|
#define SRAM_DRAM_START 0x3fc88000
|
|
|
|
/* 2nd stage bootloader iram_loader_seg start address */
|
|
|
|
#define SRAM_DRAM_END (SRAM_IRAM_END - I_D_SRAM_OFFSET)
|
|
#define I_D_SRAM_SIZE (SRAM_DRAM_END - SRAM_DRAM_START)
|
|
|
|
#define ICACHE_SIZE 0x8000
|
|
|
|
#define SRAM_IRAM_ORG (SRAM_IRAM_START + CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE)
|
|
#define SRAM_IRAM_SIZE (I_D_SRAM_SIZE + ICACHE_SIZE - CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE)
|
|
|
|
#define DCACHE_SIZE 0x10000
|
|
#define SRAM_DRAM_ORG (SRAM_DRAM_START)
|
|
|
|
#ifdef CONFIG_ESP32S3_FLASH_4M
|
|
# define FLASH_SIZE 0x400000
|
|
#elif defined (CONFIG_ESP32S3_FLASH_8M)
|
|
# define FLASH_SIZE 0x800000
|
|
#elif defined (CONFIG_ESP32S3_FLASH_16M)
|
|
# define FLASH_SIZE 0x1000000
|
|
#endif
|
|
|
|
MEMORY
|
|
{
|
|
/* Below values assume the flash cache is on, and have the blocks this
|
|
* uses subtracted from the length of the various regions. The 'data access
|
|
* port' dram/drom regions map to the same iram/irom regions but are
|
|
* connected to the data port of the CPU and eg allow bytewise access.
|
|
*/
|
|
|
|
/* IRAM for CPU */
|
|
|
|
iram0_0_seg (RX) : org = SRAM_IRAM_ORG, len = SRAM_IRAM_SIZE
|
|
|
|
/* Flash mapped instruction data. */
|
|
|
|
/* The 0x20 offset is a convenience for the app binary image generation.
|
|
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
|
|
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
|
|
* header. Setting this offset makes it simple to meet the flash cache MMU's
|
|
* constraint that (paddr % 64KB == vaddr % 64KB).
|
|
*/
|
|
|
|
irom0_0_seg (RX) : org = 0x42000020, len = FLASH_SIZE - 0x20
|
|
|
|
/* Shared data RAM, excluding memory reserved for bootloader and ROM
|
|
* bss/data/stack.
|
|
*/
|
|
|
|
dram0_0_seg (RW) : org = SRAM_DRAM_ORG, len = I_D_SRAM_SIZE
|
|
|
|
/* Flash mapped constant data */
|
|
|
|
/* The 0x20 offset is a convenience for the app binary image generation.
|
|
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
|
|
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
|
|
* header. Setting this offset makes it simple to meet the flash cache MMU's
|
|
* constraint that (paddr % 64KB == vaddr % 64KB).
|
|
*/
|
|
|
|
drom0_0_seg (R) : org = 0x3c000020, len = FLASH_SIZE - 0x20
|
|
|
|
/* RTC fast memory (executable). Persists over deep sleep. */
|
|
|
|
rtc_iram_seg(RWX) : org = 0x600fe000, len = 0x2000
|
|
|
|
/* RTC fast memory (same block as above), viewed from data bus */
|
|
|
|
rtc_data_seg(RW) : org = 0x600fe000, len = 0x2000
|
|
|
|
/* RTC slow memory (data accessible). Persists over deep sleep.
|
|
* Start of RTC slow memory is reserved for ULP co-processor code + data,
|
|
* if enabled.
|
|
*/
|
|
|
|
rtc_slow_seg(RW) : org = 0x50000000 + CONFIG_ESP32S3_ULP_COPROC_RESERVE_MEM,
|
|
len = 0x2000 - CONFIG_ESP32S3_ULP_COPROC_RESERVE_MEM
|
|
}
|
|
|
|
#ifdef CONFIG_ESP32S3_RUN_IRAM
|
|
REGION_ALIAS("default_rodata_seg", dram0_0_seg);
|
|
REGION_ALIAS("default_code_seg", iram0_0_seg);
|
|
#else
|
|
REGION_ALIAS("default_rodata_seg", drom0_0_seg);
|
|
REGION_ALIAS("default_code_seg", irom0_0_seg);
|
|
#endif /* CONFIG_ESP32S3_RUN_IRAM */
|
|
|