nuttx/tools/Makefile.host
Gregory Nutt eec44d1f01 This commit adds tools/gencromfs.c, a tool that can be used to generate CROMFS file system images.
Squashed commit of the following:

    tools/gencromfs.c:  Seems basically functional but has not has not yet been integrated with CROMFS.
    tools/gencromfs.c:  Revist previous commit.  Let's make no assumptions about the compatibility of the host system and NuttX.
    tools/gencromfs.c:  I think access mode bits are sufficiently standard that we can just copy them from the host.  This is don't mostly to pick up the executable bits and other conbinations of bits without doing a bit-for-bit decode.
    tools/gencromfs.c:  Code complete but only partially functional.
    tools/gencromfs.c:  type definitions must precede data definitions
    tools/gencromfs.c:  Adds a little more logic to gencromfs tools.  Still not complete but can traverse directories and generate directory and hard-link nodes.
    tools/gencromfs.c: Beginning of a genromfs tool that will eventually be used for generation of CROMFS file system images.
2018-03-20 07:31:13 -06:00

243 lines
7.3 KiB
Makefile

############################################################################
# Makefile.host
#
# Copyright (C) 2007, 2008, 2011-2012, 2015, 2017-2018 Gregory Nutt. All
# rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
TOPDIR ?= ${shell pwd}/..
-include $(TOPDIR)/Make.defs
include ${TOPDIR}/tools/Config.mk
# Define HOSTCC on the make command line if it differs from these defaults
# Define HOSTCFLAGS with -g on the make command line to build debug versions
HOSTOS = ${shell uname -o 2>/dev/null || echo "Other"}
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
# In the Windows native environment, the MinGW GCC compiler is assumed
HOSTCC ?= mingw-gcc.exe
HOSTCFLAGS ?= -O2 -Wall -Wstrict-prototypes -Wshadow -I. -DCONFIG_WINDOWS_NATIVE=y
else
# GCC is assumed in the POSIX environment (Linux or Cygwin).
# strtok_r is used in some tools, but does not seem to be available in
# the MinGW environment.
HOSTCC ?= gcc
HOSTCFLAGS ?= -O2 -Wall -Wstrict-prototypes -Wshadow -I.
HOSTCFLAGS += -DHAVE_STRTOK_C=1
ifeq ($(HOSTOS),Cygwin)
HOSTCFLAGS += -DHOST_CYGWIN=1
HOSTEXEEXT ?= .exe
endif
endif
# Targets
all: b16$(HOSTEXEEXT) bdf-converter$(HOSTEXEEXT) cmpconfig$(HOSTEXEEXT) \
configure$(HOSTEXEEXT) mkconfig$(HOSTEXEEXT) mkdeps$(HOSTEXEEXT) \
mksymtab$(HOSTEXEEXT) mksyscall$(HOSTEXEEXT) mkversion$(HOSTEXEEXT) \
cnvwindeps$(HOSTEXEEXT) nxstyle$(HOSTEXEEXT) initialconfig$(HOSTEXEEXT) \
logparser$(HOSTEXEEXT) gencromfs$(HOSTEXEEXT)
default: mkconfig$(HOSTEXEEXT) mksyscall$(HOSTEXEEXT) mkdeps$(HOSTEXEEXT) \
cnvwindeps$(HOSTEXEEXT)
ifdef HOSTEXEEXT
.PHONY: b16 bdf-converter cmpconfig clean configure kconfig2html mkconfig \
mkdeps mksymtab mksyscall mkversion cnvwindeps nxstyle initialconfig \
logparser gencromfs
else
.PHONY: clean
endif
# b16 - Fixed precision math conversion tool
b16$(HOSTEXEEXT): b16.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o b16$(HOSTEXEEXT) b16.c
ifdef HOSTEXEEXT
b16: b16$(HOSTEXEEXT)
endif
# configure - Instantiate a canned NuttX configuration
configure$(HOSTEXEEXT): configure.c cfgparser.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o configure$(HOSTEXEEXT) configure.c cfgparser.c
ifdef HOSTEXEEXT
configure: configure$(HOSTEXEEXT)
endif
# mkconfig - Convert a .config file into a C config.h file
mkconfig$(HOSTEXEEXT): mkconfig.c cfgdefine.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o mkconfig$(HOSTEXEEXT) mkconfig.c cfgdefine.c
ifdef HOSTEXEEXT
mkconfig: mkconfig$(HOSTEXEEXT)
endif
# cmpconfig - Compare the contents of two configuration files
cmpconfig$(HOSTEXEEXT): cmpconfig.c cfgparser.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o cmpconfig$(HOSTEXEEXT) cmpconfig.c cfgparser.c
ifdef HOSTEXEEXT
cmpconfig: cmpconfig$(HOSTEXEEXT)
endif
# kconfig2html - Create an HTML document describing the configuration options
kconfig2html$(HOSTEXEEXT): kconfig2html.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o kconfig2html$(HOSTEXEEXT) kconfig2html.c
ifdef HOSTEXEEXT
kconfig2html: kconfig2html$(HOSTEXEEXT)
endif
# mkversion - Convert a .version file into a C version.h file
mkversion$(HOSTEXEEXT): mkconfig.c cfgdefine.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o mkversion$(HOSTEXEEXT) mkversion.c cfgdefine.c
ifdef HOSTEXEEXT
mkversion: mkversion$(HOSTEXEEXT)
endif
# mksyscall - Convert a CSV file into syscall stubs and proxies
mksyscall$(HOSTEXEEXT): mksyscall.c csvparser.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o mksyscall$(HOSTEXEEXT) mksyscall.c csvparser.c
ifdef HOSTEXEEXT
mksyscall: mksyscall$(HOSTEXEEXT)
endif
# mksymtab - Convert a CSV file into a symbol table
mksymtab$(HOSTEXEEXT): mksymtab.c csvparser.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o mksymtab$(HOSTEXEEXT) mksymtab.c csvparser.c
ifdef HOSTEXEEXT
mksymtab: mksymtab$(HOSTEXEEXT)
endif
# bdf-converter - Converts a BDF font to the NuttX font format
bdf-converter$(HOSTEXEEXT): bdf-converter.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o bdf-converter$(HOSTEXEEXT) bdf-converter.c
ifdef HOSTEXEEXT
bdf-converter: bdf-converter$(HOSTEXEEXT)
endif
# nxstyle - Check a file for compliance to NuttX coding style
nxstyle$(HOSTEXEEXT): nxstyle.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o nxstyle$(HOSTEXEEXT) nxstyle.c
ifdef HOSTEXEEXT
nxstyle: nxstyle$(HOSTEXEEXT)
endif
# initialconfig - Create a barebones .config file sufficient only for
# instantiating the symbolic links necesary to do a real configuration
# from scratch.
initialconfig$(HOSTEXEEXT): initialconfig.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o initialconfig$(HOSTEXEEXT) initialconfig.c
ifdef HOSTEXEEXT
initialconfig: initialconfig$(HOSTEXEEXT)
endif
# logparser - Convert a git log to ChangeLog format.
logparser$(HOSTEXEEXT): logparser.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o logparser$(HOSTEXEEXT) logparser.c
ifdef HOSTEXEEXT
logparser: logparser$(HOSTEXEEXT)
endif
# gencromfs - Generate a CROMFS file system
gencromfs$(HOSTEXEEXT): gencromfs.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o gencromfs$(HOSTEXEEXT) gencromfs.c
ifdef HOSTEXEEXT
gencromfs: gencromfs$(HOSTEXEEXT)
endif
# cnvwindeps - Convert dependences generated by a Windows native toolchain
# for use in a Cygwin/POSIX build environment
cnvwindeps$(HOSTEXEEXT): cnvwindeps.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o cnvwindeps$(HOSTEXEEXT) cnvwindeps.c
ifdef HOSTEXEEXT
cnvwindeps: cnvwindeps$(HOSTEXEEXT)
endif
# Create dependencies for a list of files
mkdeps$(HOSTEXEEXT): mkdeps.c csvparser.c
$(Q) $(HOSTCC) $(HOSTCFLAGS) -o mkdeps$(HOSTEXEEXT) mkdeps.c
ifdef HOSTEXEEXT
mkdeps: mkdeps$(HOSTEXEEXT)
endif
clean:
$(call DELFILE, mkdeps)
$(call DELFILE, mkdeps.exe)
$(call DELFILE, cnvwindeps)
$(call DELFILE, cnvwindeps.exe)
$(call DELFILE, mkconfig)
$(call DELFILE, mkconfig.exe)
$(call DELFILE, Make.dep)
$(call DELFILE, mksyscall)
$(call DELFILE, mksyscall.exe)
$(call DELFILE, mkversion)
$(call DELFILE, mkversion.exe)
$(call DELFILE, bdf-converter)
$(call DELFILE, bdf-converter.exe)
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
$(Q) rm -rf *.dSYM
endif
$(call CLEAN)