Gregory Nutt 77f980e676 Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.

2017-04-09 14:44:49 -06:00

..

Makefile

Add support for SAMV7 DACC module

2016-08-15 08:00:36 -06:00

sam_appinit.c

Remove an unnecessary (and incorrect) factor in conditional compilation

2016-07-03 15:26:27 -06:00

sam_at24config.c

Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h

2016-07-21 13:34:54 -06:00

sam_autoleds.c

Add support for NuttX controlled LEDS and for board_initialize. Separate initialize logic to stm32_bringup.c so that in initialization can occur either through board_initialize() or through board_app_initialize(). Same as with most other newer board configurations.

2017-04-09 10:16:05 -06:00

sam_boot.c

Fix some SPI initialize function name changes that were missed with global SPI name changes

2016-02-23 07:37:36 -06:00

sam_bringup.c

Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.

2016-12-06 08:51:37 -06:00

sam_buttons.c

Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.

2017-04-09 14:44:49 -06:00

sam_dac.c

Add support for SAMV7 DACC module

2016-08-15 08:00:36 -06:00

sam_ethernet.c

arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing.

2017-03-02 08:43:33 -06:00

sam_hsmci.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_mcan.c

Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.

2016-12-06 08:51:37 -06:00

sam_sdram.c

Add basic support for the SAME70-Xplained board

2015-11-18 13:54:57 -06:00

sam_spi.c

Centralize definitions associated with CONFIG_DEBUG_SPI

2016-06-15 10:41:13 -06:00

sam_usbdev.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

sam_userleds.c

SAME70-Xplained: Has only a single LED and a single push button

2015-11-18 16:45:29 -06:00

same70-xplained.h

Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.

2016-12-06 08:51:37 -06:00