nuttx/arch/arm/include/cxd56xx/pm.h
Alin Jerpelea eeedce32c4 Merged in alinjerpelea/nuttx (pull request #881)
updates for arch: arm: cxd56xx:

* arch: arm: cxd56xx: add pinconfig

    Add the HW pin configuration for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add GPIO support

    Add GPIO support for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add support for GPIO interrupts

    add support for GPIO interrupts

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add clock support

    Add clock support for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add PMIC support

    Add support for PMIC (Power management integrated circuit)
    for cxd56xx chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add FIFO CPU schedulier

    add a simple FIFO schedulier that minimizes overhead

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add ICC support

    add Inter Core Communication for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-05 11:29:51 +00:00

392 lines
12 KiB
C

/****************************************************************************
* arch/arm/include/cxd56xx/pm.h
*
* Copyright 2018 Sony Semiconductor Solutions Corporation
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name of Sony Semiconductor Solutions Corporation nor
* the names of its contributors may be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file pm.h
*/
#ifndef __ARCH_ARM_INCLUDE_CXD56XX_PM_H
#define __ARCH_ARM_INCLUDE_CXD56XX_PM_H
/*-----------------------------------------------------------------------------
* include files
*---------------------------------------------------------------------------*/
#include <queue.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Boot Cause definitions */
#define PM_BOOT_POR_NORMAL (0x00000000ul) /** Power On Reset like as battery attached */
#define PM_BOOT_POR_DEADBATT (0x00000001ul) /** Battery charged from DeadBattery state */
#define PM_BOOT_WDT_REBOOT (0x00000002ul) /** System WDT expired or Explicitly Self Reboot */
#define PM_BOOT_WDT_RESET (0x00000004ul) /** Chip WDT expired (might be used in HV-only system) */
#define PM_BOOT_DEEP_WKUPL (0x00000008ul) /** In DeepSleep state, Detected WKUPL signal */
#define PM_BOOT_DEEP_WKUPS (0x00000010ul) /** In DeepSleep state, Detected WKUPS signal */
#define PM_BOOT_DEEP_RTC (0x00000020ul) /** In DeepSleep state, RTC Alarm expired */
#define PM_BOOT_DEEP_USB_ATTACH (0x00000040ul) /** In DeepSleep state, USB Connected */
#define PM_BOOT_DEEP_OTHERS (0x00000080ul) /** In DeepSleep state, Reserved others cause occurred */
#define PM_BOOT_COLD_SCU_INT (0x00000100ul) /** In ColdSleep state, Detected SCU Interrupt */
#define PM_BOOT_COLD_RTC (0x00001e00ul) /** In ColdSleep state, RTC Alarm Interrupt */
#define PM_BOOT_COLD_RTC_ALM0 (0x00000200ul) /** In ColdSleep state, RTC Alarm0 expired */
#define PM_BOOT_COLD_RTC_ALM1 (0x00000400ul) /** In ColdSleep state, RTC Alarm1 expired */
#define PM_BOOT_COLD_RTC_ALM2 (0x00000800ul) /** In ColdSleep state, RTC Alarm2 expired */
#define PM_BOOT_COLD_RTC_ALMERR (0x00001000ul) /** In ColdSleep state, RTC Alarm Error occurred */
#define PM_BOOT_COLD_GPIO (0x0fff0000ul) /** In ColdSleep state, Detected GPIO interrupt */
#define PM_BOOT_COLD_SEN_INT (0x10000000ul) /** In ColdSleep state, Detected SEN_INT Interrupt */
#define PM_BOOT_COLD_PMIC_INT (0x20000000ul) /** In ColdSleep state, Detected PMIC Interrupt */
#define PM_BOOT_COLD_USB_DETACH (0x40000000ul) /** In ColdSleep state, USB Disconnected */
#define PM_BOOT_COLD_USB_ATTACH (0x80000000ul) /** In ColdSleep state, USB Connected */
/* SRAM power status definitions */
#define PMCMD_RAM_OFF 0 /* Power off */
#define PMCMD_RAM_RET 1 /* Retention */
#define PMCMD_RAM_ON 3 /* Power on */
/* FrequencyLock request flag definitions */
#define PM_CPUFREQLOCK_FLAG_HV (0x0001) /* request HV */
#define PM_CPUFREQLOCK_FLAG_LV (0x4000) /* request LV */
/* FrequencyLock identifier tag helper macro function */
#define PM_CPUFREQLOCK_TAG(prefix1, prefix2, num) \
(((prefix1) << 24) + ((prefix2) << 16) + (num))
/* FrequencyLock initializer macro function */
# define PM_CPUFREQLOCK_INIT(_tag, _flag) \
{ \
.count = 0, \
.info = _tag, \
.flag = _flag, \
}
/* WakeLock identifier tag helper macro function */
#define PM_CPUWAKELOCK_TAG(prefix1, prefix2, num) \
(((prefix1) << 24) + ((prefix2) << 16) + (num))
/* WakeLock initializer macro function */
#define PM_CPUWAKELOCK_INIT(_tag) \
{ \
.count = 0, \
.info = _tag, \
}
/****************************************************************************
* Public Types
****************************************************************************/
/* slee mode definitions */
enum pm_sleepmode_e
{
PM_SLEEP_DEEP,
PM_SLEEP_COLD,
};
/* FreqLock structure */
struct pm_cpu_freqlock_s
{
struct sq_entry_s sq_entry;
int count;
uint32_t info;
int flag;
};
/* WakeLock structure */
struct pm_cpu_wakelock_s
{
struct sq_entry_s sq_entry;
int count;
uint32_t info;
};
/* Definitions for pmic notify */
enum pmic_notify_e
{
PMIC_NOTIFY_ALARM = 0,
PMIC_NOTIFY_WKUPS,
PMIC_NOTIFY_WKUPL,
PMIC_NOTIFY_LOWBATT,
PMIC_NOTIFY_MAX
};
/* callback function for pmic notify */
typedef void (*pmic_notify_t)(void *arg);
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: up_pmstatdump
*
* Description:
* Print architecture specific power status
*
****************************************************************************/
int up_pmramctrl(int cmd, uintptr_t addr, size_t size);
#ifdef CONFIG_DEBUG_PM
/****************************************************************************
* Name: up_pmstatdump
*
* Description:
* Print architecture specific power status
*
****************************************************************************/
void up_pmstatdump(void);
#else
# define up_pmstatdump()
#endif
/****************************************************************************
* Name: up_pm_acquire_freqlock
*
* Description:
* Acquire the specified freqlock. If the higher freqlock is acquired, the
* system can clockup until it is released.
*
* Parameter:
* lock - the pointer of a wakelock variable
*
****************************************************************************/
void up_pm_acquire_freqlock(struct pm_cpu_freqlock_s *lock);
/****************************************************************************
* Name: up_pm_release_freqlock
*
* Description:
* Release the specified freqlock. If the freqlock are released, the system
* can drop to the lower clock mode for power saving.
*
* Parameter:
* lock - the pointer of a freqlock variable
*
****************************************************************************/
void up_pm_release_freqlock(struct pm_cpu_freqlock_s *lock);
/****************************************************************************
* Name: up_pm_get_freqlock_count
*
* Description:
* Get the locked count of the specified freqlock
*
* Parameter:
* lock - the pointer of a freqlock variable
*
* Return:
* the locked count of the specified freqlock
*
****************************************************************************/
int up_pm_get_freqlock_count(struct pm_cpu_freqlock_s *lock);
/****************************************************************************
* Name: up_pm_acquire_wakelock
*
* Description:
* Acquire the specified wakelock. If any wakelock is acquired, CPU can't
* enter to the hot sleep state.
*
* Parameter:
* lock - the pointer of a wakelock variable
*
****************************************************************************/
void up_pm_acquire_wakelock(struct pm_cpu_wakelock_s *lock);
/****************************************************************************
* Name: up_pm_release_wakelock
*
* Description:
* Release the specified wakelock. If all of the wakelock are released,
* CPU can enter to the hot sleep state.
*
* Parameter:
* lock - the pointer of a wakelock variable
*
****************************************************************************/
void up_pm_release_wakelock(struct pm_cpu_wakelock_s *lock);
/****************************************************************************
* Name: up_pm_count_acquire_wakelock
*
* Description:
* Count the total number of wakelock
*
* Return:
* the total number of wakelock
*
****************************************************************************/
int up_pm_count_acquire_wakelock(void);
/****************************************************************************
* Name: up_pm_get_bootcause
*
* Description:
* Get the system boot cause. This boot cause indicates the cause why the
* system is launched from the state of power-off, deep sleep or cold sleep.
* Each boot cause is defined as PM_BOOT_XXX.
*
* Return:
* Boot cause
*
****************************************************************************/
uint32_t up_pm_get_bootcause(void);
/****************************************************************************
* Name: up_pm_get_bootmask
*
* Description:
* Get the system boot mask. This boot mask indicates whether the specified
* bit is enabled or not as the boot cause. If a bit of boot mask is set,
* the boot cause is enabled. Each boot mask is defined as PM_BOOT_XXX.
*
* Return:
* Boot mask
*
****************************************************************************/
uint32_t up_pm_get_bootmask(void);
/****************************************************************************
* Name: up_pm_set_bootmask
*
* Description:
* Enable the boot cause of the specified bit.
*
* Parameter:
* mask - OR of Boot mask definied as PM_BOOT_XXX
*
* Return:
* Updated boot mask
*
****************************************************************************/
uint32_t up_pm_set_bootmask(uint32_t mask);
/****************************************************************************
* Name: up_pm_clr_bootmask
*
* Description:
* Disable the boot cause of the specified bit.
*
* Parameter:
* mask - OR of Boot mask definied as PM_BOOT_XXX
*
* Return:
* Updated boot mask
*
****************************************************************************/
uint32_t up_pm_clr_bootmask(uint32_t mask);
/****************************************************************************
* Name: up_pm_sleep
*
* Description:
* Enter sleep mode. This function never returns.
*
* Parameter:
* mode - PM_SLEEP_DEEP or PM_SLEEP_COLD
*
****************************************************************************/
int up_pm_sleep(enum pm_sleepmode_e mode);
/****************************************************************************
* Name: up_pm_reboot
*
* Description:
* System reboot. This function never returns.
*
****************************************************************************/
int up_pm_reboot(void);
/****************************************************************************
* Name: up_pmic_set_notify
*
* Description:
* Register a callback for pmic interrupt
*
* Input Parameter:
* kind - A kind of pmic interrupt defined as pmic_notify_e
* cb - A callback function for a kind of pmic interrupt
*
* Returned Value:
* Return 0 on success. Otherwise, return a negated errno.
*
****************************************************************************/
#ifdef CONFIG_CXD56_PMIC_INT
int up_pmic_set_notify(int kind, pmic_notify_t cb);
#else
# define up_pmic_set_notify(kind, cb)
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ARCH_ARM_INCLUDE_CXD56XX_PM_H */