..
chip
Merged in raiden00/nuttx (pull request #480 )
2017-09-10 17:43:20 +00:00
gnu
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
iar
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
chip.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
Kconfig
Port Boris Astardzhiev RTC change for STM32L4 to STM32
2017-09-03 08:39:03 -06:00
Make.defs
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:26:53 -06:00
stm32_1wire.c
STM32 1wire: Convert to use new interrupt argument infrastructure.
2017-02-28 08:39:02 -06:00
stm32_1wire.h
Costmetic changes from review of last PR
2016-05-25 18:04:39 -06:00
stm32_adc.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_adc.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_aes.c
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
2016-02-13 19:11:09 -06:00
stm32_aes.h
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2015-02-04 06:49:05 -06:00
stm32_alarm.h
STM32 F4: Add a custom RTC driver
2016-04-02 10:46:10 -06:00
stm32_allocateheap.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_bbsram.c
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
stm32_bbsram.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_bkp.h
stm32_can.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_can.h
Move CAN subsystem to its own directory and put device drivers there
2017-05-12 11:48:47 -03:00
stm32_capture.c
Add argument to capture irq callback
2017-03-01 08:45:27 -06:00
stm32_capture.h
arch/: Remove dangling space at the end of lines.
2017-06-28 13:16:48 -06:00
stm32_ccm.c
Update some comments.
2017-02-26 09:15:57 -06:00
stm32_ccm.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_comp.c
stm32_comp: add default INM configuration and some missing COMP1,3,5,7 code
2017-08-20 10:45:55 +02:00
stm32_comp.h
stm32 COMP: Logic in stm32_comp.h must be configured on CONFIG_STM32_COMP or otherwise it causes an error via #error on every platform without COMP support.
2017-04-09 11:47:57 -06:00
stm32_dac.c
Merged in raiden00/nuttx (pull request #476 )
2017-09-02 19:52:21 +00:00
stm32_dac.h
Merged in raiden00/nuttx (pull request #469 )
2017-08-27 12:49:53 +00:00
stm32_dbgmcu.h
stm32_dma2d.c
Eliminate some warnings found in build testing.
2017-08-13 12:24:48 -06:00
stm32_dma2d.h
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:37:44 -06:00
stm32_dma.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_dma.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_dumpgpio.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_eth.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_eth.h
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
stm32_exti_alarm.c
STM32/F7/L4: EXTI ALARM function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 09:18:10 -06:00
stm32_exti_gpio.c
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
stm32_exti_pwr.c
STM3 L4: EXTI COMP function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 09:03:12 -06:00
stm32_exti_pwr.h
STM32/F7/L4: EXOT PVD function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 08:56:31 -06:00
stm32_exti.h
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
stm32_flash.c
Revert "stm32 FLASH allow non blocking operation on constrained devices"
2017-08-31 15:14:26 -06:00
stm32_flash.h
stm32: stm32_flash: add EEPROM writing for STM32L15XX
2017-04-04 07:38:49 -06:00
stm32_freerun.c
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
2017-05-08 12:33:15 -06:00
stm32_freerun.h
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
2017-05-08 12:33:15 -06:00
stm32_fsmc.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_gpio.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_gpio.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_hrtim.c
Merged in raiden00/nuttx (pull request #480 )
2017-09-10 17:43:20 +00:00
stm32_hrtim.h
Merged in raiden00/nuttx (pull request #480 )
2017-09-10 17:43:20 +00:00
stm32_i2c_alt.c
stm32:stm32 alt I2C ensure proper error handling.
2017-09-12 14:16:45 -10:00
stm32_i2c.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_i2c.h
Add basic support for the STM32F334
2017-02-26 12:39:44 +01:00
stm32_i2s.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_i2s.h
STM32F4: add cs43l22 audio driver and i2s driver
2017-05-21 14:14:09 -06:00
stm32_idle.c
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
stm32_irq.c
Cosmetic changes from review of last PR
2017-06-15 06:58:55 -06:00
stm32_iwdg.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_lowputc.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_lowputc.h
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
stm32_lse.c
Make stm32_pwr_enablebkp thread safe
2016-08-09 07:36:13 -06:00
stm32_lsi.c
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
2015-03-29 15:34:48 -06:00
stm32_ltdc.c
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
stm32_ltdc.h
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
2015-04-16 09:11:52 -06:00
stm32_mpuinit.c
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
2015-12-14 13:56:21 -06:00
stm32_mpuinit.h
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
stm32_oneshot_lowerhalf.c
Add a simulated oneshot lowerhalf driver
2016-08-12 13:14:03 -06:00
stm32_oneshot.c
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
stm32_oneshot.h
STM32L4: Port fix for multiple oneshot timers from STM32. Also fixes a few issues with original STM32 implementation.
2017-01-18 10:45:22 -06:00
stm32_opamp.c
STM32F33: Add OPAMP support
2017-04-30 11:05:34 +02:00
stm32_opamp.h
STM32F33: Add OPAMP support
2017-04-30 11:05:34 +02:00
stm32_otgfs.h
STM32: Add support for STM32F46xxx
2016-03-01 12:18:07 -05:00
stm32_otgfsdev.c
Trivial spelling fix
2017-06-20 08:02:42 -06:00
stm32_otgfshost.c
I'm working on bringing up USB full-speed support on STM32F405. My board does not include a USB power switch, VBus sensing, over current detection, or ID pin.
2017-08-07 10:24:31 -06:00
stm32_otghs.h
Standardize the width of all comment boxes in C header files
2015-10-03 07:28:30 -06:00
stm32_otghsdev.c
Minor change for consistency with a previous commit.
2017-03-12 07:20:10 -06:00
stm32_otghshost.c
This is based on a patch by Taras Drozdovsky. Basically, the delay that was added during the integration of the CDC/ACM host driver was interfering with streaming audio. That delay was put there to prevent build endpoints from hogging the system bandwidth. So what do we do? Do we hog the bandwidth or do we insert arbitrarity delays. I think both ideas such.
2017-05-21 14:28:29 -06:00
stm32_pm.h
Cosmetic: Move # of pre-processior command to column 1
2015-09-05 09:07:37 -06:00
stm32_pminitialize.c
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
2013-12-05 10:37:55 -06:00
stm32_pmsleep.c
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
stm32_pmstandby.c
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
stm32_pmstop.c
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
stm32_procfs_ccm.c
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
stm32_pwm.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_pwm.h
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:48:24 -06:00
stm32_pwr.c
Update/fix last commit: On some STM32's, the CSR regiser is 18 vs. 16 bits wide. Need to use 32-bit register accesses.
2017-09-08 14:21:24 -06:00
stm32_pwr.h
STM32: Add logic for enabling wakeup pins.
2017-09-08 13:23:08 -06:00
stm32_qencoder.c
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:26:53 -06:00
stm32_qencoder.h
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:26:53 -06:00
stm32_rcc.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_rcc.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_rng.c
STM32 RNG: Fix semaphore initial value and disable priority inheritance
2017-03-29 07:12:19 -06:00
stm32_rtc_lowerhalf.c
Correct naming of fields in struct alm_rdalarm_s. Should not be the same as the corresponding fields of struct alm_setalarm_s. The whole purpose of that naming convention is to keep the field names unique.
2017-09-03 09:51:47 -06:00
stm32_rtc.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_rtc.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_rtcc.c
Cosmetic changes from review of last PR
2017-06-15 06:58:55 -06:00
stm32_rtcounter.c
arch/: Remove dangling space at the end of lines.
2017-06-28 13:16:48 -06:00
stm32_sdadc.c
arch/: Remove dangling space at the end of lines.
2017-06-28 13:16:48 -06:00
stm32_sdadc.h
arch/: Remove dangling space at the end of lines.
2017-06-28 13:16:48 -06:00
stm32_sdio.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_sdio.h
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
stm32_serial.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_spi.c
Eliminate a warning found in build testing.
2017-08-12 11:14:11 -06:00
stm32_spi.h
More missed enum spi_dev_e forward references.
2017-04-29 08:29:01 -06:00
stm32_start.c
I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.
2016-07-14 07:29:39 -06:00
stm32_syscfg.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_tickless.c
arch/: Remove dangling space at the end of lines.
2017-06-28 13:16:48 -06:00
stm32_tim_lowerhalf.c
STM32 TIM3/4 are always 16-bits; never 32-bits. Noted by Eetu Nevalainen.
2017-07-10 13:56:06 -06:00
stm32_tim.c
Add the set counter function for stm32 timers
2017-08-31 11:54:00 -06:00
stm32_tim.h
Add the set counter function for stm32 timers
2017-08-31 11:54:00 -06:00
stm32_timerisr.c
irq_dispatch: Add argument pointer to irq_dispatch
2017-02-27 06:27:56 -06:00
stm32_uart.h
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32_uid.c
STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address
2015-11-18 14:33:27 -06:00
stm32_uid.h
Changes to last merge from review for compliance to coding standards
2015-11-17 21:10:17 -06:00
stm32_usbdev.c
irq_dispatch: Add argument pointer to irq_dispatch
2017-02-27 06:27:56 -06:00
stm32_usbdev.h
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
stm32_usbhost.c
Standardize the width of all comment boxes in header files
2015-10-02 17:42:29 -06:00
stm32_usbhost.h
I'm working on bringing up USB full-speed support on STM32F405. My board does not include a USB power switch, VBus sensing, over current detection, or ID pin.
2017-08-07 10:24:31 -06:00
stm32_userspace.c
STM32: Correct some spacing issues
2015-10-07 13:45:15 -06:00
stm32_userspace.h
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
stm32_waste.c
stm32_waste.h
STM32, STM32F7, STM32L4: Remove incorrect comment about STM32L1 LSE/RTC/LCD
2017-04-27 07:18:36 -06:00
stm32_wdg.h
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
stm32_wwdg.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32.h
STM32F33: Fix hrtim definitions, Add beginning of HRTIM driver
2017-06-11 10:49:20 -06:00
stm32f10xxx_dma.c
STM32F33: Move DMA logic to a separate files
2017-03-18 16:31:06 +01:00
stm32f10xxx_rcc.c
Fix for F1 RTC Clock, tested on F103
2016-11-25 06:17:18 +01:00
stm32f20xxx_dma.c
Convert remaining serial drivers to use use irq_attach.
2017-02-27 10:27:14 -06:00
stm32f20xxx_rcc.c
STM32 OTG HS: A little research reveals that only the F2 RCC initialization set the OTGHSULPIEN bit and Photon is the only F2 board configuration that uses OTG . Therefore, we can simplify the conditional logic of the last PR. Negative logic was used (#ifndef BOARD_DISABLE_USBOTG_HSULPI) to prevent bad settings in other configurations. But give these facts, the preferred positive logic now makes more sense (#ifdef BOARD_ENABLE_USBOTG_HSULPI).
2017-03-11 18:00:38 -06:00
stm32f30xxx_i2c.c
stm32_i2c: make private symbols static
2017-05-19 07:16:01 -06:00
stm32f30xxx_rcc.c
STM32: Correct some spacing issues
2015-10-07 13:45:15 -06:00
stm32f33xxx_dma.c
STM32F33: Move DMA logic to a separate files
2017-03-18 16:31:06 +01:00
stm32f33xxx_rcc.c
stm32f33xxx_rcc: cleanup + move hrtim clock source selection
2017-06-26 18:30:10 +02:00
stm32f37xxx_rcc.c
arch/: Remove dangling space at the end of lines.
2017-06-28 13:16:48 -06:00
stm32f40xxx_alarm.h
Correct naming of fields in struct alm_rdalarm_s. Should not be the same as the corresponding fields of struct alm_setalarm_s. The whole purpose of that naming convention is to keep the field names unique.
2017-09-03 09:51:47 -06:00
stm32f40xxx_dma.c
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
stm32f40xxx_i2c.c
stm32:stm32f40xxx I2C ensure proper error handling.
2017-09-12 14:16:45 -10:00
stm32f40xxx_rcc.c
To use an external oscillator module (not just a crystal) with the STM32F4, one needs to enable the HSEBYP bit in the RCC_CR register. This change allows an integrator to define STM32_RCC_CR_HSEBYP in their board.h file if they want this configuration.
2017-07-30 06:22:30 -06:00
stm32f40xxx_rtcc.c
RTC alarms: getalarmdatetime functions are private and should be declared static.
2017-09-03 12:20:13 -06:00
stm32l15xxx_rcc.c
STM32 L1: stm32l15xx_rcc: Allow board to configure HSE clock in bypass-mode. Allows using MCO output from ST-link chip (on Nucleo and Discovery boards) as HSE input.
2017-04-20 06:28:01 -06:00
ef411578d5