nuttx/arch/arm/src/stm32/stm32f10xxx_dma.c
2013-10-23 14:05:26 -06:00

748 lines
22 KiB
C

/****************************************************************************
* arch/arm/src/stm32/stm32f10xxx_dma.c
*
* Copyright (C) 2009, 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <arch/irq.h>
#include "up_arch.h"
#include "up_internal.h"
#include "os_internal.h"
#include "chip.h"
#include "stm32_dma.h"
#include "stm32.h"
/* Only for the STM32F10xx family for now */
#if defined(CONFIG_STM32_STM32F10XX) || defined(CONFIG_STM32_STM32F30XX)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define DMA1_NCHANNELS 7
#if STM32_NDMA > 1
# define DMA2_NCHANNELS 5
# define DMA_NCHANNELS (DMA1_NCHANNELS+DMA2_NCHANNELS)
#else
# define DMA_NCHANNELS DMA1_NCHANNELS
#endif
#ifndef CONFIG_DMA_PRI
# define CONFIG_DMA_PRI NVIC_SYSH_PRIORITY_DEFAULT
#endif
/* Convert the DMA channel base address to the DMA register block address */
#define DMA_BASE(ch) (ch & 0xfffffc00)
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure descibes one DMA channel */
struct stm32_dma_s
{
uint8_t chan; /* DMA channel number (0-6) */
uint8_t irq; /* DMA channel IRQ number */
sem_t sem; /* Used to wait for DMA channel to become available */
uint32_t base; /* DMA register channel base address */
dma_callback_t callback; /* Callback invoked when the DMA completes */
void *arg; /* Argument passed to callback function */
};
/****************************************************************************
* Private Data
****************************************************************************/
/* This array describes the state of each DMA */
static struct stm32_dma_s g_dma[DMA_NCHANNELS] =
{
{
.chan = 0,
.irq = STM32_IRQ_DMA1CH1,
.base = STM32_DMA1_BASE + STM32_DMACHAN_OFFSET(0),
},
{
.chan = 1,
.irq = STM32_IRQ_DMA1CH2,
.base = STM32_DMA1_BASE + STM32_DMACHAN_OFFSET(1),
},
{
.chan = 2,
.irq = STM32_IRQ_DMA1CH3,
.base = STM32_DMA1_BASE + STM32_DMACHAN_OFFSET(2),
},
{
.chan = 3,
.irq = STM32_IRQ_DMA1CH4,
.base = STM32_DMA1_BASE + STM32_DMACHAN_OFFSET(3),
},
{
.chan = 4,
.irq = STM32_IRQ_DMA1CH5,
.base = STM32_DMA1_BASE + STM32_DMACHAN_OFFSET(4),
},
{
.chan = 5,
.irq = STM32_IRQ_DMA1CH6,
.base = STM32_DMA1_BASE + STM32_DMACHAN_OFFSET(5),
},
{
.chan = 6,
.irq = STM32_IRQ_DMA1CH7,
.base = STM32_DMA1_BASE + STM32_DMACHAN_OFFSET(6),
},
#if STM32_NDMA > 1
{
.chan = 0,
.irq = STM32_IRQ_DMA2CH1,
.base = STM32_DMA2_BASE + STM32_DMACHAN_OFFSET(0),
},
{
.chan = 1,
.irq = STM32_IRQ_DMA2CH2,
.base = STM32_DMA2_BASE + STM32_DMACHAN_OFFSET(1),
},
{
.chan = 2,
.irq = STM32_IRQ_DMA2CH3,
.base = STM32_DMA2_BASE + STM32_DMACHAN_OFFSET(2),
},
{
.chan = 3,
#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F30XX)
.irq = STM32_IRQ_DMA2CH4,
#else
.irq = STM32_IRQ_DMA2CH45,
#endif
.base = STM32_DMA2_BASE + STM32_DMACHAN_OFFSET(3),
},
{
.chan = 4,
#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F30XX)
.irq = STM32_IRQ_DMA2CH5,
#else
.irq = STM32_IRQ_DMA2CH45,
#endif
.base = STM32_DMA2_BASE + STM32_DMACHAN_OFFSET(4),
},
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* DMA register access functions
****************************************************************************/
/* Get non-channel register from DMA1 or DMA2 */
static inline uint32_t dmabase_getreg(struct stm32_dma_s *dmach, uint32_t offset)
{
return getreg32(DMA_BASE(dmach->base) + offset);
}
/* Write to non-channel register in DMA1 or DMA2 */
static inline void dmabase_putreg(struct stm32_dma_s *dmach, uint32_t offset, uint32_t value)
{
putreg32(value, DMA_BASE(dmach->base) + offset);
}
/* Get channel register from DMA1 or DMA2 */
static inline uint32_t dmachan_getreg(struct stm32_dma_s *dmach, uint32_t offset)
{
return getreg32(dmach->base + offset);
}
/* Write to channel register in DMA1 or DMA2 */
static inline void dmachan_putreg(struct stm32_dma_s *dmach, uint32_t offset, uint32_t value)
{
putreg32(value, dmach->base + offset);
}
/************************************************************************************
* Name: stm32_dmatake() and stm32_dmagive()
*
* Description:
* Used to get exclusive access to a DMA channel.
*
************************************************************************************/
static void stm32_dmatake(FAR struct stm32_dma_s *dmach)
{
/* Take the semaphore (perhaps waiting) */
while (sem_wait(&dmach->sem) != 0)
{
/* The only case that an error should occur here is if the wait was awakened
* by a signal.
*/
ASSERT(errno == EINTR);
}
}
static inline void stm32_dmagive(FAR struct stm32_dma_s *dmach)
{
(void)sem_post(&dmach->sem);
}
/************************************************************************************
* Name: stm32_dmachandisable
*
* Description:
* Disable the DMA channel
*
************************************************************************************/
static void stm32_dmachandisable(struct stm32_dma_s *dmach)
{
uint32_t regval;
/* Disable all interrupts at the DMA controller */
regval = dmachan_getreg(dmach, STM32_DMACHAN_CCR_OFFSET);
regval &= ~DMA_CCR_ALLINTS;
/* Disable the DMA channel */
regval &= ~DMA_CCR_EN;
dmachan_putreg(dmach, STM32_DMACHAN_CCR_OFFSET, regval);
/* Clear pending channel interrupts */
dmabase_putreg(dmach, STM32_DMA_IFCR_OFFSET, DMA_ISR_CHAN_MASK(dmach->chan));
}
/************************************************************************************
* Name: stm32_dmainterrupt
*
* Description:
* DMA interrupt handler
*
************************************************************************************/
static int stm32_dmainterrupt(int irq, void *context)
{
struct stm32_dma_s *dmach;
uint32_t isr;
int chndx = 0;
/* Get the channel structure from the interrupt number */
if (irq >= STM32_IRQ_DMA1CH1 && irq <= STM32_IRQ_DMA1CH7)
{
chndx = irq - STM32_IRQ_DMA1CH1;
}
else
#if STM32_NDMA > 1
#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F30XX)
if (irq >= STM32_IRQ_DMA2CH1 && irq <= STM32_IRQ_DMA2CH5)
#else
if (irq >= STM32_IRQ_DMA2CH1 && irq <= STM32_IRQ_DMA2CH45)
#endif
{
chndx = irq - STM32_IRQ_DMA2CH1 + DMA1_NCHANNELS;
}
else
#endif
{
PANIC();
}
dmach = &g_dma[chndx];
/* Get the interrupt status (for this channel only) */
isr = dmabase_getreg(dmach, STM32_DMA_ISR_OFFSET) & DMA_ISR_CHAN_MASK(dmach->chan);
/* Clear the interrupts we are handling */
dmabase_putreg(dmach, STM32_DMA_IFCR_OFFSET, isr);
/* Invoke the callback */
if (dmach->callback)
{
dmach->callback(dmach, isr >> DMA_ISR_CHAN_SHIFT(dmach->chan), dmach->arg);
}
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_dmainitialize
*
* Description:
* Initialize the DMA subsystem
*
* Returned Value:
* None
*
****************************************************************************/
void weak_function up_dmainitialize(void)
{
struct stm32_dma_s *dmach;
int chndx;
/* Initialize each DMA channel */
for (chndx = 0; chndx < DMA_NCHANNELS; chndx++)
{
dmach = &g_dma[chndx];
sem_init(&dmach->sem, 0, 1);
/* Attach DMA interrupt vectors */
(void)irq_attach(dmach->irq, stm32_dmainterrupt);
/* Disable the DMA channel */
stm32_dmachandisable(dmach);
/* Enable the IRQ at the NVIC (still disabled at the DMA controller) */
up_enable_irq(dmach->irq);
/* Set the interrrupt priority */
up_prioritize_irq(dmach->irq, CONFIG_DMA_PRI);
}
}
/****************************************************************************
* Name: stm32_dmachannel
*
* Description:
* Allocate a DMA channel. This function gives the caller mutually
* exclusive access to the DMA channel specified by the 'chndx' argument.
* DMA channels are shared on the STM32: Devices sharing the same DMA
* channel cannot do DMA concurrently! See the DMACHAN_* definitions in
* stm32_dma.h.
*
* If the DMA channel is not available, then stm32_dmachannel() will wait
* until the holder of the channel relinquishes the channel by calling
* stm32_dmafree(). WARNING: If you have two devices sharing a DMA
* channel and the code never releases the channel, the stm32_dmachannel
* call for the other will hang forever in this function! Don't let your
* design do that!
*
* Hmm.. I suppose this interface could be extended to make a non-blocking
* version. Feel free to do that if that is what you need.
*
* Input parameter:
* chndx - Identifies the stream/channel resource. For the STM32 F1, this
* is simply the channel number as provided by the DMACHAN_* definitions
* in chip/stm32f10xxx_dma.h.
*
* Returned Value:
* Provided that 'chndx' is valid, this function ALWAYS returns a non-NULL,
* void* DMA channel handle. (If 'chndx' is invalid, the function will
* assert if debug is enabled or do something ignorant otherwise).
*
* Assumptions:
* - The caller does not hold he DMA channel.
* - The caller can wait for the DMA channel to be freed if it is no
* available.
*
****************************************************************************/
DMA_HANDLE stm32_dmachannel(unsigned int chndx)
{
struct stm32_dma_s *dmach = &g_dma[chndx];
DEBUGASSERT(chndx < DMA_NCHANNELS);
/* Get exclusive access to the DMA channel -- OR wait until the channel
* is available if it is currently being used by another driver
*/
stm32_dmatake(dmach);
/* The caller now has exclusive use of the DMA channel */
return (DMA_HANDLE)dmach;
}
/****************************************************************************
* Name: stm32_dmafree
*
* Description:
* Release a DMA channel. If another thread is waiting for this DMA channel
* in a call to stm32_dmachannel, then this function will re-assign the
* DMA channel to that thread and wake it up. NOTE: The 'handle' used
* in this argument must NEVER be used again until stm32_dmachannel() is
* called again to re-gain access to the channel.
*
* Returned Value:
* None
*
* Assumptions:
* - The caller holds the DMA channel.
* - There is no DMA in progress
*
****************************************************************************/
void stm32_dmafree(DMA_HANDLE handle)
{
struct stm32_dma_s *dmach = (struct stm32_dma_s *)handle;
DEBUGASSERT(handle != NULL);
/* Release the channel */
stm32_dmagive(dmach);
}
/****************************************************************************
* Name: stm32_dmasetup
*
* Description:
* Configure DMA before using
*
****************************************************************************/
void stm32_dmasetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr,
size_t ntransfers, uint32_t ccr)
{
struct stm32_dma_s *dmach = (struct stm32_dma_s *)handle;
uint32_t regval;
/* Then DMA_CNDTRx register can only be modified if the DMA channel is
* disabled.
*/
regval = dmachan_getreg(dmach, STM32_DMACHAN_CCR_OFFSET);
regval &= ~(DMA_CCR_EN);
dmachan_putreg(dmach, STM32_DMACHAN_CCR_OFFSET, regval);
/* Set the peripheral register address in the DMA_CPARx register. The data
* will be moved from/to this address to/from the memory after the
* peripheral event.
*/
dmachan_putreg(dmach, STM32_DMACHAN_CPAR_OFFSET, paddr);
/* Set the memory address in the DMA_CMARx register. The data will be
* written to or read from this memory after the peripheral event.
*/
dmachan_putreg(dmach, STM32_DMACHAN_CMAR_OFFSET, maddr);
/* Configure the total number of data to be transferred in the DMA_CNDTRx
* register. After each peripheral event, this value will be decremented.
*/
dmachan_putreg(dmach, STM32_DMACHAN_CNDTR_OFFSET, ntransfers);
/* Configure the channel priority using the PL[1:0] bits in the DMA_CCRx
* register. Configure data transfer direction, circular mode, peripheral & memory
* incremented mode, peripheral & memory data size, and interrupt after
* half and/or full transfer in the DMA_CCRx register.
*/
regval = dmachan_getreg(dmach, STM32_DMACHAN_CCR_OFFSET);
regval &= ~(DMA_CCR_MEM2MEM|DMA_CCR_PL_MASK|DMA_CCR_MSIZE_MASK|DMA_CCR_PSIZE_MASK|
DMA_CCR_MINC|DMA_CCR_PINC|DMA_CCR_CIRC|DMA_CCR_DIR);
ccr &= (DMA_CCR_MEM2MEM|DMA_CCR_PL_MASK|DMA_CCR_MSIZE_MASK|DMA_CCR_PSIZE_MASK|
DMA_CCR_MINC|DMA_CCR_PINC|DMA_CCR_CIRC|DMA_CCR_DIR);
regval |= ccr;
dmachan_putreg(dmach, STM32_DMACHAN_CCR_OFFSET, regval);
}
/****************************************************************************
* Name: stm32_dmastart
*
* Description:
* Start the DMA transfer
*
* Assumptions:
* - DMA handle allocated by stm32_dmachannel()
* - No DMA in progress
*
****************************************************************************/
void stm32_dmastart(DMA_HANDLE handle, dma_callback_t callback,
void *arg, bool half)
{
struct stm32_dma_s *dmach = (struct stm32_dma_s *)handle;
uint32_t ccr;
DEBUGASSERT(handle != NULL);
/* Save the callback info. This will be invoked whent the DMA commpletes */
dmach->callback = callback;
dmach->arg = arg;
/* Activate the channel by setting the ENABLE bit in the DMA_CCRx register.
* As soon as the channel is enabled, it can serve any DMA request from the
* peripheral connected on the channel.
*/
ccr = dmachan_getreg(dmach, STM32_DMACHAN_CCR_OFFSET);
ccr |= DMA_CCR_EN;
/* In normal mode, interrupt at either half or full completion. In circular mode,
* always interrupt on buffer wrap, and optionally interrupt at the halfway point.
*/
if ((ccr & DMA_CCR_CIRC) == 0)
{
/* Once half of the bytes are transferred, the half-transfer flag (HTIF) is
* set and an interrupt is generated if the Half-Transfer Interrupt Enable
* bit (HTIE) is set. At the end of the transfer, the Transfer Complete Flag
* (TCIF) is set and an interrupt is generated if the Transfer Complete
* Interrupt Enable bit (TCIE) is set.
*/
ccr |= (half ? (DMA_CCR_HTIE|DMA_CCR_TEIE) : (DMA_CCR_TCIE|DMA_CCR_TEIE));
}
else
{
/* In nonstop mode, when the transfer completes it immediately resets
* and starts again. The transfer-complete interrupt is thus always
* enabled, and the half-complete interrupt can be used in circular
* mode to determine when the buffer is half-full, or in double-buffered
* mode to determine when one of the two buffers is full.
*/
ccr |= (half ? DMA_CCR_HTIE : 0) | DMA_CCR_TCIE | DMA_CCR_TEIE;
}
dmachan_putreg(dmach, STM32_DMACHAN_CCR_OFFSET, ccr);
}
/****************************************************************************
* Name: stm32_dmastop
*
* Description:
* Cancel the DMA. After stm32_dmastop() is called, the DMA channel is
* reset and stm32_dmasetup() must be called before stm32_dmastart() can be
* called again
*
* Assumptions:
* - DMA handle allocated by stm32_dmachannel()
*
****************************************************************************/
void stm32_dmastop(DMA_HANDLE handle)
{
struct stm32_dma_s *dmach = (struct stm32_dma_s *)handle;
stm32_dmachandisable(dmach);
}
/****************************************************************************
* Name: stm32_dmaresidual
*
* Description:
* Returns the number of bytes remaining to be transferred
*
* Assumptions:
* - DMA handle allocated by stm32_dmachannel()
*
****************************************************************************/
size_t stm32_dmaresidual(DMA_HANDLE handle)
{
struct stm32_dma_s *dmach = (struct stm32_dma_s *)handle;
return dmachan_getreg(dmach, STM32_DMACHAN_CNDTR_OFFSET);
}
/****************************************************************************
* Name: stm32_dmacapable
*
* Description:
* Check if the DMA controller can transfer data to/from given memory
* address. This depends on the internal connections in the ARM bus matrix
* of the processor. Note that this only applies to memory addresses, it
* will return false for any peripheral address.
*
* Returned value:
* True, if transfer is possible.
*
****************************************************************************/
#ifdef CONFIG_STM32_DMACAPABLE
bool stm32_dmacapable(uint32_t maddr, uint32_t count, uint32_t ccr)
{
uint32_t transfer_size;
uint32_t mend;
/* Verify that the address conforms to the memory transfer size.
* Transfers to/from memory performed by the DMA controller are
* required to be aligned to their size.
*
* See ST RM0090 rev4, section 9.3.11
*
* Compute mend inline to avoid a possible non-constant integer
* multiply.
*/
switch (ccr & STM32_DMA_SCR_MSIZE_MASK)
{
case DMA_SCR_MSIZE_8BITS:
transfer_size = 1;
mend = maddr + count - 1;
break;
case DMA_SCR_MSIZE_16BITS:
transfer_size = 2;
mend = maddr + (count << 1) - 1;
break;
case DMA_SCR_MSIZE_32BITS:
transfer_size = 4;
mend = maddr + (count << 2) - 1;
break;
default
return false;
}
if ((maddr & (transfer_size - 1)) != 0)
{
return false;
}
/* Verify that the transfer is to a memory region that supports DMA. */
if ((maddr & STM32_REGION_MASK) != (mend & STM32_REGION_MASK))
{
return false;
}
switch (maddr & STM32_REGION_MASK)
{
#if defined(CONFIG_STM32_STM32F10XX)
case STM32_FSMC_BANK1:
case STM32_FSMC_BANK2:
case STM32_FSMC_BANK3:
case STM32_FSMC_BANK4:
#endif
case STM32_SRAM_BASE:
case STM32_CODE_BASE:
/* All RAM and flash is supported */
return true;
default:
/* Everything else is unsupported by DMA */
return false;
}
}
#endif
/****************************************************************************
* Name: stm32_dmasample
*
* Description:
* Sample DMA register contents
*
* Assumptions:
* - DMA handle allocated by stm32_dmachannel()
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void stm32_dmasample(DMA_HANDLE handle, struct stm32_dmaregs_s *regs)
{
struct stm32_dma_s *dmach = (struct stm32_dma_s *)handle;
irqstate_t flags;
flags = irqsave();
regs->isr = dmabase_getreg(dmach, STM32_DMA_ISR_OFFSET);
regs->ccr = dmachan_getreg(dmach, STM32_DMACHAN_CCR_OFFSET);
regs->cndtr = dmachan_getreg(dmach, STM32_DMACHAN_CNDTR_OFFSET);
regs->cpar = dmachan_getreg(dmach, STM32_DMACHAN_CPAR_OFFSET);
regs->cmar = dmachan_getreg(dmach, STM32_DMACHAN_CMAR_OFFSET);
irqrestore(flags);
}
#endif
/****************************************************************************
* Name: stm32_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
* Assumptions:
* - DMA handle allocated by stm32_dmachannel()
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void stm32_dmadump(DMA_HANDLE handle, const struct stm32_dmaregs_s *regs,
const char *msg)
{
struct stm32_dma_s *dmach = (struct stm32_dma_s *)handle;
uint32_t dmabase = DMA_BASE(dmach->base);
dmadbg("DMA Registers: %s\n", msg);
dmadbg(" ISRC[%08x]: %08x\n", dmabase + STM32_DMA_ISR_OFFSET, regs->isr);
dmadbg(" CCR[%08x]: %08x\n", dmach->base + STM32_DMACHAN_CCR_OFFSET, regs->ccr);
dmadbg(" CNDTR[%08x]: %08x\n", dmach->base + STM32_DMACHAN_CNDTR_OFFSET, regs->cndtr);
dmadbg(" CPAR[%08x]: %08x\n", dmach->base + STM32_DMACHAN_CPAR_OFFSET, regs->cpar);
dmadbg(" CMAR[%08x]: %08x\n", dmach->base + STM32_DMACHAN_CMAR_OFFSET, regs->cmar);
}
#endif
#endif /* CONFIG_STM32_STM32F10XX */