1281 lines
43 KiB
Plaintext
1281 lines
43 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see misc/tools/kconfig-language.txt.
|
|
#
|
|
|
|
choice
|
|
prompt "Select target board"
|
|
default ARCH_BOARD_CUSTOM
|
|
---help---
|
|
Select the board hosting the architure. You must first select the
|
|
exact MCU part number, then the boards supporting that part will
|
|
be available for selection. Use ARCH_BOARD_CUSTOM to create a new
|
|
board configuration.
|
|
|
|
config ARCH_BOARD_16Z
|
|
bool "16z Board"
|
|
depends on ARCH_CHIP_Z16F2811
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This selection enables the port of NuttX port to the 16z board. The
|
|
16z board is based on the ZiLOG ZNEO Z16F2811AL20EG part. See
|
|
https://github.com/toyaga/16z for further information.
|
|
|
|
config ARCH_BOARD_AMBER
|
|
bool "Amber Web Server"
|
|
depends on ARCH_CHIP_ATMEGA128
|
|
---help---
|
|
This is placeholder for the SoC Robotics Amber Web Server that is based
|
|
on the Atmel AVR ATMega128 MCU. There is not much there yet and what is
|
|
there is untested due to tool-related issues.
|
|
|
|
config ARCH_BOARD_ARDUINO_DUE
|
|
bool "Arduino Due"
|
|
depends on ARCH_CHIP_ATSAM3X8E
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This options selects the Arduino DUE board featuring the Atmel
|
|
ATSAM3X8E MCU running at 84 MHz.
|
|
|
|
config ARCH_BOARD_AVR32DEV1
|
|
bool "Atmel AVR32DEV1 board"
|
|
depends on ARCH_CHIP_AT32UC3B0256
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
This is a port of NuttX to the Atmel AVR32DEV1 board. That board is
|
|
based on the Atmel AT32UC3B0256 MCU and uses a specially patched
|
|
version of the GNU toolchain: The patches provide support for the
|
|
AVR32 family. That patched GNU toolchain is available only from the
|
|
Atmel website. STATUS: This port is functional but very basic. There
|
|
are configurations for NSH and the OS test.
|
|
|
|
config ARCH_BOARD_C5471EVM
|
|
bool "Spectrum Digital C5471 evaluation board"
|
|
depends on ARCH_CHIP_C5471
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is a port to the Spectrum Digital C5471 evaluation board. The
|
|
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
|
|
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
|
|
NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*.
|
|
This port is complete and verified.
|
|
|
|
config ARCH_BOARD_CLOUDCTRL
|
|
bool "Darcy's CloudController stm32f10x board"
|
|
depends on ARCH_CHIP_STM32F107VC
|
|
---help---
|
|
Small network relay development board. Based on the Shenzhou IV development
|
|
board design.
|
|
|
|
config ARCH_BOARD_COMPALE86
|
|
bool "Compal e86 phone"
|
|
depends on ARCH_CHIP_CALYPSO
|
|
---help---
|
|
This configuration enables board support for Compal e86 phone.
|
|
This port derives from the Compal E88 port and was provided by Craig
|
|
Comstock.
|
|
|
|
config ARCH_BOARD_COMPALE88
|
|
bool "Compal e88 phone"
|
|
depends on ARCH_CHIP_CALYPSO
|
|
---help---
|
|
This configuration enables board support for compal e88 phone.
|
|
This ports is based on patches contributed by Denis Carikli for both the
|
|
compal e99 and e88. The patches were made by Alan Carvalho de Assis and
|
|
Denis Carikli using the Stefan Richter's Osmocom-bb patches.
|
|
|
|
config ARCH_BOARD_COMPALE99
|
|
bool "Compal e99 phone"
|
|
depends on ARCH_CHIP_CALYPSO
|
|
---help---
|
|
This configuration enables board support for compal e88 and e99 phones.
|
|
This port is based on patches contributed by Denis Carikli for both the
|
|
compal e99 and e88. The patches were made by Alan Carvalho de Assis and
|
|
Denis Carikli using the Stefan Richter's Osmocom-bb patches.
|
|
|
|
config ARCH_BOARD_DEMOS92S12NEC64
|
|
bool "Freescale DMO9S12NE64 board"
|
|
depends on ARCH_CHIP_MCS92S12NEC64
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
Freescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This
|
|
port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it
|
|
is code complete but has not yet been verified.
|
|
|
|
config ARCH_BOARD_EA3131
|
|
bool "Embedded Artists EA3131 Development board"
|
|
depends on ARCH_CHIP_LPC3131
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
Embedded Artists EA3131 Development board. This board is based on the
|
|
an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*.
|
|
STATUS: This port is complete and mature.
|
|
|
|
config ARCH_BOARD_EA3152
|
|
bool "Embedded Artists EA3152 Development board"
|
|
depends on ARCH_CHIP_LPC3152
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
Embedded Artists EA3152 Development board. This board is based on the
|
|
an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*.
|
|
STATUS: This port is has not be exercised well, but since it is
|
|
a simple derivative of the ea3131, it should be fully functional.
|
|
|
|
config ARCH_BOARD_EAGLE100
|
|
bool "Micromint Eagle-100 Development board"
|
|
depends on ARCH_CHIP_LM3S6918
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
Micromint Eagle-100 Development board. This board is based on the
|
|
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
|
|
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
|
|
|
|
config ARCH_BOARD_EKKLM3S9B96
|
|
bool "TI/Stellaris EKK-LM3S9B96"
|
|
depends on ARCH_CHIP_LM3S9B96
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
TI/Stellaris EKK-LM3S9B96 board. This board is based on the
|
|
an EKK-LM3S9B96 which is a Cortex-M3.
|
|
|
|
config ARCH_BOARD_EZ80F910200KITG
|
|
bool "ZiLOG ez80f910200kitg development kit"
|
|
depends on ARCH_CHIP_EZ80F91
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
ez80Acclaim! Microcontroller. This port use the ZiLOG ez80f910200kitg
|
|
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
|
|
tools. The development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_EZ80F910200ZCO
|
|
bool "ZiLOG ez80f910200zco development kit"
|
|
depends on ARCH_CHIP_EZ80F91
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200zco
|
|
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
|
|
tools. The development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_FREEDOM_KL25Z
|
|
bool "Freescale Freedom KL25Z"
|
|
depends on ARCH_CHIP_MKL25Z128
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is the configuration for the Freescale Freedom KL25Z board. This
|
|
board has the K25Z120LE3AN chip with a built-in SDA debugger.
|
|
|
|
config ARCH_BOARD_HYMINI_STM32V
|
|
bool "HY-Mini STM32v board"
|
|
depends on ARCH_CHIP_STM32F103VCT6
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
A configuration for the HY-Mini STM32v board. This board is based on the
|
|
STM32F103VCT6 chip.
|
|
|
|
config ARCH_BOARD_LINCOLN60
|
|
bool "Micromint Lincoln 60 board"
|
|
depends on ARCH_CHIP_LPC1769
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
Micromint Lincoln 60 board using the NXP LPC1769 MCU.
|
|
|
|
config ARCH_BOARD_KWIKSTIK_K40
|
|
bool "FreeScale KwikStik-K40 development board"
|
|
depends on ARCH_CHIP_MK40X256VLQ100
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
Kinetis K40 Cortex-M4 MCU. This port uses the FreeScale KwikStik-K40
|
|
development board.
|
|
|
|
config ARCH_BOARD_LM3S6432S2E
|
|
bool "Stellaris RDK-S2E Reference Design Kit"
|
|
depends on ARCH_CHIP_LM3S6432
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to
|
|
Serial module.
|
|
|
|
config ARCH_BOARD_LM3S6965EK
|
|
bool "Stellaris LM3S6965 Evaluation Kit"
|
|
depends on ARCH_CHIP_LM3S6965
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
Stellaris LM3S6965 Evaluation Kit. This board is based on the
|
|
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
|
|
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
|
|
|
|
config ARCH_BOARD_LM3S8962EK
|
|
bool "Stellaris LMS38962 Evaluation Kit"
|
|
depends on ARCH_CHIP_LM3S8962
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
Stellaris LMS38962 Evaluation Kit.
|
|
|
|
config ARCH_BOARD_LM4F120_LAUNCHPAD
|
|
bool "Stellaris LM4F120 LaunchPad"
|
|
depends on ARCH_CHIP_LM4F120
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
Stellaris LM4F120 LaunchPad.
|
|
|
|
config ARCH_BOARD_LPCXPRESSO
|
|
bool "NXP LPCExpresso LPC1768"
|
|
depends on ARCH_CHIP_LPC1768
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
Embedded Artists base board with NXP LPCExpresso LPC1768. This board
|
|
is based on the NXP LPC1768. The Code Red toolchain is used by default.
|
|
|
|
config ARCH_BOARD_LPC4330_XPLORER
|
|
bool "NXG LPC4330-Xplorer"
|
|
depends on ARCH_CHIP_LPC4330FET100
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
NXG Technologoies LPC4330 Xplorer board. This board is based on the
|
|
LPC4330FET100. The Code Red toolchain is used by default.
|
|
|
|
config ARCH_BOARD_MBED
|
|
bool "mbed LCP1768"
|
|
depends on ARCH_CHIP_LPC1768
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
The configurations in this directory support the mbed board (http://mbed.org)
|
|
that features the NXP LPC1768 microcontroller. This OS is also built
|
|
with the arm-nuttx-elf toolchain*. STATUS: Contributed.
|
|
|
|
config ARCH_BOARD_MCU123
|
|
bool "mcu123.com LPC2148 Development Board"
|
|
depends on ARCH_CHIP_LPC2148
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This port is for the NXP LPC2148 as provided on the mcu123.com
|
|
lpc214x development board. This OS is also built with the arm-nuttx-elf
|
|
toolchain*. The port supports serial, timer0, spi, and usb.
|
|
|
|
config ARCH_BOARD_MICROPENDOUS3
|
|
bool "Opendous Micropendous 3 board"
|
|
depends on ARCH_CHIP_AT90USB646 || ARCH_CHIP_AT90USB647 || ARCH_CHIP_AT90USB1286 || ARCH_CHIP_AT90USB1287
|
|
---help---
|
|
This is a port to the Opendous Micropendous 3 board. This board may
|
|
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU.
|
|
Support is configured for the AT90USB647.
|
|
|
|
config ARCH_BOARD_MX1ADS
|
|
bool "Motorola MX1ADS development board"
|
|
depends on ARCH_CHIP_IMX1
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is a port to the Motorola MX1ADS development board. That board
|
|
is based on the Freescale i.MX1 processor. The i.MX1 is an ARM920T.
|
|
STATUS: This port is nearly code complete but was never fully
|
|
integrated due to tool-related issues.
|
|
|
|
config ARCH_BOARD_NE64BADGE
|
|
bool "FEG NE64 /PoE Badge board"
|
|
depends on ARCH_CHIP_MCS92S12NEC64
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
Future Electronics Group NE64 /PoE Badge board based on the
|
|
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain.
|
|
STATUS: Under development. The port is code-complete but has
|
|
not yet been fully tested.
|
|
|
|
config ARCH_BOARD_NTOSD_DM320
|
|
bool "Neuros OSD v1.0 Dev Board"
|
|
depends on ARCH_CHIP_DM320
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf
|
|
toolchain*: see
|
|
|
|
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home
|
|
|
|
There are some differences between the Dev Board and the currently
|
|
available commercial v1.0 Boards. See
|
|
|
|
http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1
|
|
|
|
NuttX operates on the ARM9EJS of this dual core processor.
|
|
STATUS: This port is code complete, verified, and included in the
|
|
NuttX 0.2.1 release.
|
|
|
|
config ARCH_BOARD_NUCLEUS2G
|
|
bool "Nucleus 2G board"
|
|
depends on ARCH_CHIP_LPC1768
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This port uses the Nucleus 2G board (with Babel CAN board). This board
|
|
features an NXP LPC1768 processor. See the 2G website (http://www.2g-eng.com/)
|
|
for more information about the Nucleus 2G.
|
|
|
|
config ARCH_BOARD_LPC1766STK
|
|
bool "Olimex LPC1766-STK board"
|
|
depends on ARCH_CHIP_LPC1766
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under
|
|
Linux or Cygwin. STATUS: Complete and mature.
|
|
|
|
config ARCH_BOARD_MAPLE
|
|
bool "maple board"
|
|
depends on ARCH_CHIP_STM32F103RB || ARCH_CHIP_STM32F103CB
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
A configuration for the LeafLab's Maple and Maple Mini boards.
|
|
These boards are based on the STM32F103RBT6 chip for the standard
|
|
version and on the STM32F103CBT6 for the mini version
|
|
(See http://leaflabs.com/docs/hardware/maple.html)
|
|
|
|
config ARCH_BOARD_MIRTOO
|
|
bool "Mirtoo PIC32 Module from Dimitech"
|
|
depends on ARCH_CHIP_PIC32MX250F128D
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip
|
|
PIC32MX250F128D. See http://www.dimitech.com/ for further information.
|
|
|
|
config ARCH_BOARD_NUTINY_NUC120
|
|
bool "Nuvoton NuTiny NUC120"
|
|
depends on ARCH_CHIP_NUC120LE3AN
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is the port to the Nuvoton NuTiny EVB 120 board. This board uses a
|
|
Nuvoton NUC120 chip, specifically the NUC120LE3AN. See http://www.nuvoton.com/
|
|
for further information.
|
|
|
|
config ARCH_BOARD_OLIMEXLPC2378
|
|
bool "Olimex-lpc2378 board"
|
|
depends on ARCH_CHIP_LPC2378
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under
|
|
Linux or Cygwin. STATUS: ostest and NSH configurations available.
|
|
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
|
|
|
|
config ARCH_BOARD_OLIMEX_LPC_H3131
|
|
bool "Olimex LPC-H3131 Development board"
|
|
depends on ARCH_CHIP_LPC3131
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
Olimex LPC-H3131 development board. This board is based on the the
|
|
NXP LPC3131 MCU.
|
|
|
|
config ARCH_BOARD_OLIMEX_STRP711
|
|
bool "Olimex STR-P711 board"
|
|
depends on ARCH_CHIP_STR71X
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under
|
|
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
|
|
further information. STATUS: Configurations for the basic OS test and NSH
|
|
are complete and verified.
|
|
|
|
config ARCH_BOARD_OLIMEX_STM32P107
|
|
bool "Olimex STM32 P107 board"
|
|
depends on ARCH_CHIP_STM32F107VC
|
|
---help---
|
|
This port uses the Olimex STM32 P107 board and a GNU arm-nuttx-elf toolchain* under
|
|
Linux or Cygwin. See the http://www.olimex.com for further information. This
|
|
board features the STMicro STM32F107VC MCU
|
|
|
|
config ARCH_BOARD_OLIMEX_STM32P207
|
|
bool "Olimex STM32 P207 board"
|
|
depends on ARCH_CHIP_STM32F207ZE
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
This port uses the Olimex STM32 P207 board and a GNU arm-nuttx-elf toolchain* under
|
|
Linux or Cygwin. See the http://www.olimex.com for further information. This
|
|
board features the STMicro STM32F207ZE MCU
|
|
|
|
config ARCH_BOARD_OPEN1788
|
|
bool "Wave Share Open1788"
|
|
depends on ARCH_CHIP_LPC1788
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
This port uses the Wave Share Open1788 board. See the
|
|
http://wvshare.com/product/Open1788-Standard.htm for further
|
|
information. This board features the NXP LPC1788 MCU
|
|
|
|
config ARCH_BOARD_P112
|
|
bool "P112 Z180-based platform"
|
|
depends on ARCH_CHIP_Z8018216FSG
|
|
---help---
|
|
The P112 is notable because it was the first of the hobbyist single board
|
|
computers to reach the production stage. The P112 hobbyist computers
|
|
were relatively widespread and inspired other hobbyist centered home brew
|
|
computing projects such as N8VEM home brew computing project. The P112
|
|
project still maintains many devoted enthusiasts and has an online
|
|
repository of software and other information.
|
|
|
|
The P112 computer originated as a commercial product of "D-X Designs Pty
|
|
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
|
|
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
|
|
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
|
|
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
|
|
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
|
|
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
|
|
|
|
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
|
|
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
|
|
boards was discussed. David Griffith decided to produce additional P112 kits
|
|
with Dave Brooks blessing and the assistance of others. In addition Terry
|
|
Gulczynski makes additional P112 derivative hobbyist home brew computers.
|
|
Hal Bower was very active in the mid 1990's on the P112 project and ported
|
|
the "Banked/Portable BIOS".
|
|
|
|
config ARCH_BOARD_PCBLOGICPIC32MX
|
|
bool "PIC32MX board from PCB Logic Design Co"
|
|
depends on ARCH_CHIP_PIC32MX460F512L
|
|
---help---
|
|
This is the port of NuttX to the PIC32MX board from PCB Logic Design Co.
|
|
This board features the MicroChip PIC32MX460F512L.
|
|
The board is a very simple -- little more than a carrier for the PIC32
|
|
MCU plus voltage regulation, debug interface, and an OTG connector.
|
|
STATUS: Code complete but testing has been stalled due to tool related problems
|
|
(PICkit 2 does not work with the PIC32).
|
|
|
|
config ARCH_BOARD_PCDUINO_A10
|
|
bool "pcDuino A10"
|
|
depends on ARCH_CHIP_A10
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
This is the port of NuttX to the Allwinner A10-based pcDuino v1
|
|
board. See http://www.pcduino.com/ for information about pcDuino Lite, v1,
|
|
and v2. I have not compared these boards in detail, but I believe that
|
|
the differences are cosmetic. This port was developed on the v1 board,
|
|
but the others may be compatible.
|
|
|
|
config ARCH_BOARD_PIC32_STARTERKIT
|
|
bool "Microchip PIC32 Ethernet Starter Kit (DM320004)"
|
|
depends on ARCH_CHIP_PIC32MX795F512L
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is the port of NuttX to the Microchip PIC32 Ethernet Starter Kit
|
|
(DM320004) with the Multimedia Expansion Board (MEB, DM320005).
|
|
See www.microchip.com for further information.
|
|
|
|
config ARCH_BOARD_PIC32MX7MMB
|
|
bool "Mikroelektronika PIC32MX7 MMB"
|
|
depends on ARCH_CHIP_PIC32MX795F512L
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is the port NuttX to the Mikroelektronika PIC32MX7 Multimedia Board
|
|
(MMB). See http://www.mikroe.com/ for further information.
|
|
|
|
config ARCH_BOARD_PIRELLI_DPL10
|
|
bool "Pirelli DPL10 phone"
|
|
depends on ARCH_CHIP_CALYPSO
|
|
---help---
|
|
This directory contains the board support for Pirelli dpl10 phones. The
|
|
additions were made by Craig Comstock (with help form Alan Carvalho de Assis).
|
|
|
|
config ARCH_BOARD_PJRC_87C52
|
|
bool "PJRC 87C52 development system"
|
|
depends on ARCH_CHIP_8052
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
8051 Microcontroller. This port uses the PJRC 87C52 development system
|
|
and the SDCC toolchain. This port is not quite ready for prime time.
|
|
|
|
config ARCH_BOARD_PX4FMU_V2
|
|
bool "PX4FMU v2"
|
|
depends on ARCH_CHIP_STM32F427V
|
|
---help---
|
|
This is a minimal configuration that supports low-level test of the
|
|
PX4FMU v2 in the NuttX source tree. If you are using PX4, you
|
|
probably don't want this configuration. You probably want the
|
|
latest supported configuration available from the PX4 GIT
|
|
repositories.
|
|
|
|
config ARCH_BOARD_QEMU_I486
|
|
bool "Qemu i486 Mode"
|
|
depends on ARCH_X86 || ARCH_I486
|
|
---help---
|
|
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
|
|
hardwared (Google the Bifferboard).
|
|
|
|
config ARCH_BOARD_RGMP
|
|
bool "RGMP"
|
|
depends on ARCH_RGMP
|
|
---help---
|
|
RGMP stands for RTOS and GPOS on Multi-Processor. RGMP is a project for
|
|
running GPOS and RTOS simultaneously on multi-processor platforms. You can
|
|
port your favorite RTOS to RGMP together with an unmodified Linux to form a
|
|
hybrid operating system. This makes your application able to use both RTOS
|
|
and GPOS features.
|
|
|
|
See http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further information
|
|
about RGMP.
|
|
|
|
config ARCH_BOARD_SAMA5D3X_EK
|
|
bool "Atmel SAMA5D3x-EK development board"
|
|
depends on ARCH_CHIP_ATSAMA5D31 || ARCH_CHIP_ATSAMA5D33 || ARCH_CHIP_ATSAMA5D34 || ARCH_CHIP_ATSAMA5D35
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
The port of NuttX to the Atmel SAMA5D3x-EK development board (where x=1,3,4, or 5).
|
|
|
|
config ARCH_BOARD_SAMD20_XPLAINED
|
|
bool "Atmel SAMD20-Xplained Pro development board"
|
|
depends on ARCH_CHIP_SAMD20J18
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
The port of NuttX to the Atmel SAMD20-Xplained Pro development board.
|
|
This board features the ATSAMD20J18A MCU (Cortex-M0+ with 256KB of FLASH
|
|
and 32KB of SRAM).
|
|
|
|
config ARCH_BOARD_SAM3UEK
|
|
bool "Atmel SAM3U-EK development board"
|
|
depends on ARCH_CHIP_ATSAM3U4E
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
The port of NuttX to the Atmel SAM3U-EK development board.
|
|
|
|
config ARCH_BOARD_SAM4L_XPLAINED
|
|
bool "Atmel SAM4L-Xplained Pro development board"
|
|
depends on ARCH_CHIP_ATSAM4LC4C
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
The port of NuttX to the Atmel SAM4L-Xplained Pro development board.
|
|
|
|
config ARCH_BOARD_SAM4S_XPLAINED
|
|
bool "Atmel SAM4S-Xplained development board"
|
|
depends on ARCH_CHIP_ATSAM4S16C
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
The port of NuttX to the Atmel SAM4S-Xplained development board.
|
|
|
|
config ARCH_BOARD_SHENZHOU
|
|
bool "Shenzhou STM32F107 board"
|
|
depends on ARCH_CHIP_STM32F107VC
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
This port uses the Shenzhou STM32 F107 board and a GNU arm-nuttx-elf toolchain* under
|
|
Linux or Cygwin. See the http://www.armjishu.com for further information. This
|
|
board features the STMicro STM32F107VC MCU
|
|
|
|
config ARCH_BOARD_SKP16C26
|
|
bool "Renesas SKP16C26 StarterKit"
|
|
depends on ARCH_CHIP_M30262F8
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port
|
|
uses the GNU m32c toolchain. STATUS: The port is complete but untested
|
|
due to issues with compiler internal errors.
|
|
|
|
config ARCH_BOARD_SPARK
|
|
bool "Spark Core"
|
|
depends on ARCH_CHIP_STM32F103CB
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
A configuration for the Spark Core from Spark Devices
|
|
(http://www.spark.io). This board features the STM32103CBT6
|
|
MCU from STMicro.
|
|
|
|
config ARCH_BOARD_STM32_TINY
|
|
bool "STM32-Tiny board"
|
|
depends on ARCH_CHIP_STM32F103C8
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
A configuration for the STM32 Tiny board. This board is based on a
|
|
STM32F103C8T6 micro-controller chip, and is (always ?) bundled with
|
|
an nRF24L01+ wireless module.
|
|
|
|
config ARCH_BOARD_STM3210E_EVAL
|
|
bool "STMicro STM3210E-EVAL development board"
|
|
depends on ARCH_CHIP_STM32F103ZET6
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6
|
|
microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3
|
|
toolchain.
|
|
|
|
config ARCH_BOARD_STM3220G_EVAL
|
|
bool "STMicro STM3220G-EVAL development board"
|
|
depends on ARCH_CHIP_STM32F207IG
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG
|
|
microcontroller (ARM Cortex-M3).
|
|
|
|
config ARCH_BOARD_STM3240G_EVAL
|
|
bool "STMicro STM3240G-EVAL development board"
|
|
depends on ARCH_CHIP_STM32F407IG
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6
|
|
microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4
|
|
toolchain (such as CodeSourcery).
|
|
|
|
config ARCH_BOARD_STM32F100RC_GENERIC
|
|
bool "STMicro STM32F100RC generic board"
|
|
depends on ARCH_CHIP_STM32F100RC
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM32F100RC generic board.
|
|
|
|
config ARCH_BOARD_STM32F3_DISCOVERY
|
|
bool "STMicro STM32F3-Discovery board"
|
|
depends on ARCH_CHIP_STM32F303VC
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM32F3-Discovery board based on the STMicro STM32F303VCT6 MCU.
|
|
|
|
config ARCH_BOARD_STM32F4_DISCOVERY
|
|
bool "STMicro STM32F4-Discovery board"
|
|
depends on ARCH_CHIP_STM32F407VG
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM32F4-Discovery board based on the STMicro STM32F407VGT6 MCU.
|
|
|
|
config ARCH_BOARD_STM32F429I_DISCO
|
|
bool "STMicro STM32F429I-Discovery board"
|
|
depends on ARCH_CHIP_STM32F429Z
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU.
|
|
|
|
config ARCH_BOARD_STM32L_DISCOVERY
|
|
bool "STMicro STM32L-Discovery board"
|
|
depends on ARCH_CHIP_STM32L152RB
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM32L-Discovery board based on the STMicro STM32L152RB MCU.
|
|
|
|
config ARCH_BOARD_STM32VL_DISCOVERY
|
|
bool "STMicro STM32VL-Discovery board"
|
|
depends on ARCH_CHIP_STM32F100RB
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
STMicro STM32VL-Discovery board based on the STMicro STM32F100RB MCU.
|
|
|
|
config ARCH_BOARD_MIKROE_STM32F4
|
|
bool "MikroElektronika Mikromedia for STM32F4 board"
|
|
depends on ARCH_CHIP_STM32F407VG
|
|
---help---
|
|
This is the port NuttX to the Mikroelektronika Mikromedia for STM32F4 Multimedia Board
|
|
(MMB). See http://www.mikroe.com/ for further information.
|
|
|
|
config ARCH_BOARD_SUREPIC32MX
|
|
bool "Sure PIC32MX boards"
|
|
depends on ARCH_CHIP_PIC32MX440F512H
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure
|
|
Electronics (http://www.sureelectronics.net/). This board features
|
|
the MicroChip PIC32MX440F512H. See also
|
|
http://www.sureelectronics.net/goods.php?id=1168 for further
|
|
information about the Sure DB-DP11215 board.
|
|
|
|
config ARCH_BOARD_TEENSY
|
|
bool "PJRC Teensy++ 2.0 board"
|
|
depends on ARCH_CHIP_AT90USB1286
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
|
|
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
|
|
on an Atmel AT90USB1286 MCU.
|
|
|
|
config ARCH_BOARD_TWR_K60N512
|
|
bool "FreeScale TWR-K60N512d evelopment board"
|
|
depends on ARCH_CHIP_MK60N512VMD100
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512
|
|
development board.
|
|
|
|
config ARCH_BOARD_UBW32
|
|
bool "UBW32 v2.4 board from Sparkfun"
|
|
depends on ARCH_CHIP_PIC32MX460F512L
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
select ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
This is the port to the Sparkfun UBW32 board. This port uses the original v2.4
|
|
board which is based on the MicroChip PIC32MX460F512L. See
|
|
http://www.sparkfun.com/products/8971. This older version has been replaced
|
|
with this board http://www.sparkfun.com/products/9713. See also
|
|
http://www.schmalzhaus.com/UBW32/.
|
|
|
|
config ARCH_BOARD_US7032EVB1
|
|
bool "Hitachi SH-1/US7032EVB1 board"
|
|
depends on ARCH_CHIP_SH7032
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
|
|
STATUS: Work has just began on this port.
|
|
|
|
config ARCH_BOARD_VIEWTOOL_STM32F107
|
|
bool "ViewTool STM32F103/F107"
|
|
depends on ARCH_CHIP_STM32F107VC || ARCH_CHIP_STM32F103VCT6
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
This port uses the ViewTool STM32F103/F107 V1.2 board. This
|
|
board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
|
|
See http://www.viewtool.com/ for further information.
|
|
|
|
config ARCH_BOARD_VSN
|
|
bool "SOTEL NetClamps VSN sensor network platform"
|
|
depends on ARCH_CHIP_STM32F103RET6
|
|
select ARCH_HAVE_LEDS
|
|
select ARCH_HAVE_BUTTONS
|
|
---help---
|
|
ISOTEL NetClamps VSN V1.2 ready2go sensor network platform based on the
|
|
STMicro STM32F103RET6. Contributed by Uros Platise. See
|
|
http://isotel.eu/NetClamps/
|
|
|
|
config ARCH_BOARD_XTRS
|
|
bool "XTRS TRS80 Model 3 emulation"
|
|
depends on ARCH_CHIP_Z80
|
|
select ARCH_HAVE_UART
|
|
---help---
|
|
TRS80 Model 3. This port uses a vintage computer based on the Z80.
|
|
An emulator for this computer is available to run TRS80 programs on a
|
|
linux platform (http://www.tim-mann.org/xtrs.html).
|
|
|
|
config ARCH_BOARD_Z16F2800100ZCOG
|
|
bool "Zilog Z16F2800100ZCOG Development Kit"
|
|
depends on ARCH_CHIP_Z16F2811
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
z16f Microcontroller. This port use the ZiLIG z16f2800100zcog
|
|
development kit and the Zilog ZDS-II Windows command line tools. The
|
|
development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_Z80SIM
|
|
bool "Z80 Instruction Set Simulator"
|
|
depends on ARCH_CHIP_Z80
|
|
select ARCH_HAVE_UART
|
|
---help---
|
|
z80 Microcontroller. This port uses a Z80 instruction set simulator.
|
|
That simulator can be found in the NuttX GIT at
|
|
http://sourceforge.net/p/nuttx/git/ci/master/tree/misc/sims/z80sim.
|
|
This port also uses the SDCC toolchain (http://sdcc.sourceforge.net/")
|
|
(verified with version 2.6.0).
|
|
|
|
config ARCH_BOARD_Z8ENCORE000ZCO
|
|
bool "ZiLOG Z8ENCORE000ZCO Development Kit"
|
|
depends on ARCH_CHIP_Z8F6403
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
z8Encore! Microcontroller. This port use the ZiLOG Z8ENCORE000ZCO
|
|
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
|
|
tools. The development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_Z8F64200100KIT
|
|
bool "ZiLOG Z8F64200100KIT Development Kit"
|
|
depends on ARCH_CHIP_Z8F6423
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
z8Encore! Microcontroller. This port use the Zilog Z8F64200100KIT
|
|
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
|
|
tools. The development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_ZP214XPA
|
|
bool "The0.net LPC2148 Development Board"
|
|
depends on ARCH_CHIP_LPC2148
|
|
---help---
|
|
This port is for the NXP LPC2148 as provided on the The0.net
|
|
ZPA213X/4XPA development board. Includes support for the
|
|
UG-2864AMBAG01 OLED also from The0.net
|
|
|
|
config ARCH_BOARD_ZKITARM
|
|
bool "Zilogic ZKit-ARM-1769 Development Kit"
|
|
depends on ARCH_CHIP_LPC1768
|
|
select ARCH_HAVE_LEDS
|
|
---help---
|
|
Zilogic System's ARM development Kit, ZKIT-ARM-1769. This board is based
|
|
on the NXP LPC1769. The Nuttx Buildroot toolchain is used by default.
|
|
|
|
config ARCH_BOARD_SIM
|
|
bool "User mode simulation"
|
|
depends on ARCH_SIM
|
|
---help---
|
|
A user-mode port of NuttX to the x86 Linux/Cygwin platform is available.
|
|
The purpose of this port is primarily to support OS feature development.
|
|
This port does not support interrupts or a real timer (and hence no
|
|
round robin scheduler) Otherwise, it is complete.
|
|
|
|
config ARCH_BOARD_CUSTOM
|
|
bool "Custom development board"
|
|
---help---
|
|
Select this option if there is no directory for the board under configs/.
|
|
|
|
Don't see the board you want? You must first select the exact MCU part
|
|
number, then the boards supporting that part will be available for selection.
|
|
|
|
endchoice
|
|
|
|
config ARCH_BOARD_CUSTOM_DIR
|
|
string "Custom board directory"
|
|
depends on ARCH_BOARD_CUSTOM
|
|
---help---
|
|
If the custom board configuration is selected, then it is necessary
|
|
to also tell the build system where it can find the board directory
|
|
for the custom board. This may be either a relative path from the
|
|
toplevel NuttX directory (like "configs/myboard") or an absolute path
|
|
to some location outside of the NuttX source tree (like
|
|
"~/projects/myboard").
|
|
|
|
config ARCH_BOARD
|
|
string
|
|
default "16z" if ARCH_BOARD_16Z
|
|
default "amber" if ARCH_BOARD_AMBER
|
|
default "arduino-due" if ARCH_BOARD_ARDUINO_DUE
|
|
default "avr32dev1" if ARCH_BOARD_AVR32DEV1
|
|
default "c5471evm" if ARCH_BOARD_C5471EVM
|
|
default "compal_e86" if ARCH_BOARD_COMPALE86
|
|
default "compal_e88" if ARCH_BOARD_COMPALE88
|
|
default "compal_e99" if ARCH_BOARD_COMPALE99
|
|
default "demo9s12ne64" if ARCH_BOARD_DEMOS92S12NEC64
|
|
default "ea3131" if ARCH_BOARD_EA3131
|
|
default "ea3152" if ARCH_BOARD_EA3152
|
|
default "eagle100" if ARCH_BOARD_EAGLE100
|
|
default "ekk-lm3s9b96" if ARCH_BOARD_EKKLM3S9B96
|
|
default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG
|
|
default "ez80f910200zco" if ARCH_BOARD_EZ80F910200ZCO
|
|
default "fire-stm32v2" if ARCH_BOARD_FIRE_STM32
|
|
default "freedom-kl25z" if ARCH_BOARD_FREEDOM_KL25Z
|
|
default "hymini-stm32v" if ARCH_BOARD_HYMINI_STM32V
|
|
default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40
|
|
default "lincoln60" if ARCH_BOARD_LINCOLN60
|
|
default "lm3s6432-s2e" if ARCH_BOARD_LM3S6432S2E
|
|
default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK
|
|
default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK
|
|
default "lm4f120-launchpad" if ARCH_BOARD_LM4F120_LAUNCHPAD
|
|
default "lpc4330-xplorer" if ARCH_BOARD_LPC4330_XPLORER
|
|
default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO
|
|
default "maple" if ARCH_BOARD_MAPLE
|
|
default "mbed" if ARCH_BOARD_MBED
|
|
default "mcu123-lpc214x" if ARCH_BOARD_MCU123
|
|
default "micropendous3" if ARCH_BOARD_MICROPENDOUS3
|
|
default "mirtoo" if ARCH_BOARD_MIRTOO
|
|
default "mx1ads" if ARCH_BOARD_MX1ADS
|
|
default "ne64badge" if ARCH_BOARD_NE64BADGE
|
|
default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320
|
|
default "nucleus2g" if ARCH_BOARD_NUCLEUS2G
|
|
default "nutiny-nuc120" if ARCH_BOARD_NUTINY_NUC120
|
|
default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK
|
|
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
|
|
default "olimex-lpc-h3131" if ARCH_BOARD_OLIMEX_LPC_H3131
|
|
default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107
|
|
default "olimex-stm32-p207" if ARCH_BOARD_OLIMEX_STM32P207
|
|
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
|
|
default "open1788" if ARCH_BOARD_OPEN1788
|
|
default "p112" if ARCH_BOARD_P112
|
|
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
|
|
default "pcduino-a10" if ARCH_BOARD_PCDUINO_A10
|
|
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
|
|
default "pic32mx7mmb" if ARCH_BOARD_PIC32MX7MMB
|
|
default "pirelli_dpl10" if ARCH_BOARD_PIRELLI_DPL10
|
|
default "pjrc-8051" if ARCH_BOARD_PJRC_87C52
|
|
default "px4fmu-v2_upstream" if ARCH_BOARD_PX4FMU_V2
|
|
default "qemu-i486" if ARCH_BOARD_QEMU_I486
|
|
default "rgmp" if ARCH_BOARD_RGMP
|
|
default "sama5d3x-ek" if ARCH_BOARD_SAMA5D3X_EK
|
|
default "samd20-xplained" if ARCH_BOARD_SAMD20_XPLAINED
|
|
default "sam3u-ek" if ARCH_BOARD_SAM3UEK
|
|
default "sam4l-xplained" if ARCH_BOARD_SAM4L_XPLAINED
|
|
default "sam4s-xplained" if ARCH_BOARD_SAM4S_XPLAINED
|
|
default "shenzhou" if ARCH_BOARD_SHENZHOU
|
|
default "skp16c26" if ARCH_BOARD_SKP16C26
|
|
default "spark" if ARCH_BOARD_SPARK
|
|
default "stm32_tiny" if ARCH_BOARD_STM32_TINY
|
|
default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL
|
|
default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL
|
|
default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL
|
|
default "stm32f100rc_generic" if ARCH_BOARD_STM32F100RC_GENERIC
|
|
default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY
|
|
default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY
|
|
default "stm32f429i-disco" if ARCH_BOARD_STM32F429I_DISCO
|
|
default "stm32ldiscovery" if ARCH_BOARD_STM32L_DISCOVERY
|
|
default "stm32vldiscovery" if ARCH_BOARD_STM32VL_DISCOVERY
|
|
default "mikroe-stm32f4" if ARCH_BOARD_MIKROE_STM32F4
|
|
default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX
|
|
default "teensy" if ARCH_BOARD_TEENSY
|
|
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512
|
|
default "ubw32" if ARCH_BOARD_UBW32
|
|
default "us7032evb1" if ARCH_BOARD_US7032EVB1
|
|
default "viewtool-stm32f107" if ARCH_BOARD_VIEWTOOL_STM32F107
|
|
default "vsn" if ARCH_BOARD_VSN
|
|
default "xtrs" if ARCH_BOARD_XTRS
|
|
default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG
|
|
default "z80sim" if ARCH_BOARD_Z80SIM
|
|
default "z8encore000zco" if ARCH_BOARD_Z8ENCORE000ZCO
|
|
default "z8f64200100kit" if ARCH_BOARD_Z8F64200100KIT
|
|
default "zp214xpa" if ARCH_BOARD_ZP214XPA
|
|
default "zkit-arm-1769" if ARCH_BOARD_ZKITARM
|
|
default "sim" if ARCH_BOARD_SIM
|
|
|
|
comment "Common Board Options"
|
|
|
|
config ARCH_HAVE_LEDS
|
|
bool
|
|
|
|
config ARCH_LEDS
|
|
bool "Board LED support"
|
|
default y
|
|
depends on ARCH_HAVE_LEDS
|
|
---help---
|
|
Use board LEDs to show NuttX execution status state. Unique to boards that have LEDs
|
|
|
|
config ARCH_HAVE_BUTTONS
|
|
bool
|
|
|
|
config ARCH_BUTTONS
|
|
bool "Board button support"
|
|
default n
|
|
depends on ARCH_HAVE_BUTTONS
|
|
---help---
|
|
"Support interfaces to use buttons provided by the board."
|
|
|
|
config ARCH_HAVE_IRQBUTTONS
|
|
bool
|
|
|
|
config ARCH_IRQBUTTONS
|
|
bool "Button interrupt support"
|
|
default n
|
|
depends on ARCH_BUTTONS && ARCH_HAVE_IRQBUTTONS
|
|
---help---
|
|
"Support interrupts on button presses and releases."
|
|
|
|
config NSH_MMCSDMINOR
|
|
int "MMC/SD minor number"
|
|
default 0
|
|
depends on NSH_LIBRARY && MMCSD
|
|
---help---
|
|
If board-specific NSH start-up logic needs to mount an MMC/SD device, then the setting should be provided to identify the MMC/SD minor device number (i.e., the N in /dev/mmcsdN). Default 0
|
|
|
|
config NSH_MMCSDSLOTNO
|
|
int "MMC/SD slot number"
|
|
default 0
|
|
depends on NSH_LIBRARY && MMCSD
|
|
---help---
|
|
If board-specific NSH start-up supports more than one MMC/SD slot, then this setting should be provided to indicate which slot should be used. Default: 0.
|
|
|
|
config NSH_MMCSDSPIPORTNO
|
|
int "MMC/SD SPI device number"
|
|
default 0
|
|
depends on NSH_LIBRARY && MMCSD && MMCSD_SPI
|
|
---help---
|
|
If board-specif NSH start-up logic will mount an SPI-based MMC/SD volume, then this setting may be needed to tell the board logic which SPI bus to use. Default: 0 (meaning is board-specific).
|
|
|
|
comment "Board-Specific Options"
|
|
|
|
if ARCH_BOARD_16Z
|
|
source "configs/16z/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_AMBER
|
|
source "configs/amber/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_ARDUINO_DUE
|
|
source "configs/arduino-due/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_AVR32DEV1
|
|
source "configs/avr32dev1/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_C5471EVM
|
|
source "configs/c5471evm/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_COMPALE86
|
|
source "configs/compal_e86/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_COMPALE88
|
|
source "configs/compal_e88/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_COMPALE99
|
|
source "configs/compal_e99/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_DEMOS92S12NEC64
|
|
source "configs/demo9s12ne64/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_EA3131
|
|
source "configs/ea3131/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_EA3152
|
|
source "configs/ea3152/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_EAGLE100
|
|
source "configs/eagle100/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_EKKLM3S9B96
|
|
source "configs/ekk-lm3s9b96/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_EZ80F910200KITG
|
|
source "configs/ez80f910200kitg/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_EZ80F910200ZCO
|
|
source "configs/ez80f910200zco/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_FIRE_STM32
|
|
source "configs/fire-stm32v2/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_HYMINI_STM32V
|
|
source "configs/hymini-stm32v/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_KWIKSTIK_K40
|
|
source "configs/kwikstik-k40/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_LINCOLN60
|
|
source "configs/lincoln60/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_LM3S6432S2E
|
|
source "configs/lm3s6432-s2e/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_LM3S6965EK
|
|
source "configs/lm3s6965-ek/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_LM3S8962EK
|
|
source "configs/lm3s8962-ek/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_LM3S8962EK
|
|
source "configs/lm4f120-launchpad/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_LPC4330_XPLORER
|
|
source "configs/lpc4330-xplorer/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_LPCXPRESSO
|
|
source "configs/lpcxpresso-lpc1768/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_MAPLE
|
|
source "configs/maple/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_MBED
|
|
source "configs/mbed/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_MCU123
|
|
source "configs/mcu123-lpc214x/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_MICROPENDOUS3
|
|
source "configs/micropendous3/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_MIKROE_STM32F4
|
|
source "configs/mikroe-stm32f4/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_MIRTOO
|
|
source "configs/mirtoo/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_MX1ADS
|
|
source "configs/mx1ads/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_NE64BADGE
|
|
source "configs/ne64badge/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_NTOSD_DM320
|
|
source "configs/ntosd-dm320/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_NUCLEUS2G
|
|
source "configs/nucleus2g/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_NUTINY_NUC120
|
|
source "configs/nutiny-nuc120/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_LPC1766STK
|
|
source "configs/olimex-lpc1766stk/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_OLIMEXLPC2378
|
|
source "configs/olimex-lpc2378/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_OLIMEX_LPC_H3131
|
|
source "configs/olimex-lpc-h3131/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_OLIMEX_STM32P107
|
|
source "configs/olimex-stm32-p107/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_OLIMEX_STM32P207
|
|
source "configs/olimex-stm32-p207/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_OLIMEX_STRP711
|
|
source "configs/olimex-strp711/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_OPEN1788
|
|
source "configs/open1788/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_PCBLOGICPIC32MX
|
|
source "configs/pcblogic-pic32mx/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_PCDUINO_A10
|
|
source "configs/pcduino-a10/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_PIC32_STARTERKIT
|
|
source "configs/pic32-starterkit/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_PIC32MX7MMB
|
|
source "configs/pic32mx7mmb/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_PIRELLI_DPL10
|
|
source "configs/pirelli_dpl10/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_PJRC_87C52
|
|
source "configs/pjrc-8051/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_PX4FMU_V2
|
|
source "configs/px4fmu-v2_upstream/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_QEMU_I486
|
|
source "configs/qemu-i486/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_RGMP
|
|
source "configs/rgmp/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SAMA5D3X_EK
|
|
source "configs/sama5d3x-ek/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SAMD20_XPLAINED
|
|
source "configs/samd20-xplained/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SAM3UEK
|
|
source "configs/sam3u-ek/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SAM4L_XPLAINED
|
|
source "configs/sam4l-xplained/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SAM4S_XPLAINED
|
|
source "configs/sam4s-xplained/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SHENZHOU
|
|
source "configs/shenzhou/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SKP16C26
|
|
source "configs/skp16c26/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SPARK
|
|
source "configs/spark/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM32_TINY
|
|
source "configs/stm32_tiny/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM3210E_EVAL
|
|
source "configs/stm3210e-eval/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM3220G_EVAL
|
|
source "configs/stm3220g-eval/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM3240G_EVAL
|
|
source "configs/stm3240g-eval/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM32F100RC_GENERIC
|
|
source "configs/stm32f100rc_generic/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM32F4_DISCOVERY
|
|
source "configs/stm32f4discovery/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM32F429I_DISCO
|
|
source "configs/stm32f429i-disco/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM32L_DISCOVERY
|
|
source "configs/stm32ldiscovery/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_STM32VL_DISCOVERY
|
|
source "configs/stm32vldiscovery/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SUREPIC32MX
|
|
source "configs/sure-pic32mx/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_TEENSY
|
|
source "configs/teensy/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_TWR_K60N512
|
|
source "configs/twr-k60n512/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_UBW32
|
|
source "configs/ubw32/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_US7032EVB1
|
|
source "configs/us7032evb1/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_VIEWTOOL_STM32F107
|
|
source "configs/viewtool-stm32f107/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_VSN
|
|
source "configs/vsn/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_XTRS
|
|
source "configs/xtrs/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_Z16F2800100ZCOG
|
|
source "configs/z16f2800100zcog/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_Z80SIM
|
|
source "configs/z80sim/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_Z8ENCORE000ZCO
|
|
source "configs/z8encore000zco/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_Z8F64200100KIT
|
|
source "configs/z8f64200100kit/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_ZP214XPA
|
|
source "configs/zp214xpa/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_ZKITARM
|
|
source "configs/zkit-arm-1769/Kconfig"
|
|
endif
|
|
if ARCH_BOARD_SIM
|
|
source "configs/sim/Kconfig"
|
|
endif
|