nuttx/configs/launchxl-cc1310/include/board.h
Gregory Nutt f41b9fead9 arch/arm/src/tiva/cc13xx: The trim files from the TI DriverLib now compile successfully. This merge also brings in the ROM files from the TI DriverLib which do NOT year compile correctly. This is still a work in progress. There merge also adds unverified support for the LaunchXL-CC1310.
Squashed commit of the following:

    confgs/launchxl-cc1310:  Add board support for the LaunchXL-CC1310.  This is a work in progress and does not yet build error free.

     arch/arm/src/tiva/cc13xx: cc13x0_trim.c now compiles; Make xxx_rom.h header files conform a little more closely to the NuttX coding style.

    arch/arm/src/tiva/cc13xx:  CC13x2 (V1 and V2) rom.c files now build with no errors or warnings. Still have to work through the CC13x0 version.

    arch/arm/src/tiva/hardware:  Add CC13x0/CC13x2_CC26x2 AON BATMON register definition header file.

    arch/arm/src/tiva/cc13xx: A little more progress converting TI DriverLib ROM code to NuttX coding style.  Lots of possibilities for breakage here!

    arch/arm/src/tiva/cc13xx:  Remove functions from cc13x._rom.c that are defined from ROM access in cc13x._rom.h; Add prototypes in cc13x._rom.h for functions in cc13x._rom.c that are not defined in cc13x._rom.h.

    arch/arm/src/tiva/cc13xx:  Remove some dangling whitespace at the end of lines.

    arch/arm/src/tiva/cc13xx:  Second (and final) round of name changes to get ROM function-like defines consistent with NuttX coding standard

    arch/arm/src/tiva/cc13xx:  Fix a few errors in last big name conversion.

    arch/arm/src/tiva/cc13xx:  First round of name changes to get ROM function-like defines consistent with NuttX coding standard

    arch/arm/src/tiva/cc13xx:  Remove ROM_ prefix from function-like defines.
2019-01-22 15:21:58 -06:00

139 lines
5.5 KiB
C

/****************************************************************************
* configs/launchxl-cc1310/include/board.h
*
* Copyright (C) 2019 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __CONFIG_LAUNCH_CC1310_INCLUDE_BOARD_H
#define __CONFIG_LAUNCH_CC1310_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* Frequency of the ARM core clock */
#define SYSCLK_FREQUENCY 48000000
/* Peripheral Clock (PCLK)
*
* Same frequency as the SYSCLK
*/
#define PCLK_FREQUENCY SYSCLK_FREQUENCY
/* LED definitions **********************************************************/
/* The LaunchXL-cc1310 and two LEDs controlled by software: DIO7_GLED (CR1)
* and DIO6_RLED (CR2). A high output value illuminates an LED.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in
* any way. The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_GLED 0
#define BOARD_RLED 1
#define BOARD_NLEDS 2
/* LED bits for use with board_userled_all() */
#define BOARD_GLED_BIT (1 << BOARD_GLED)
#define BOARD_RLED_BIT (1 << BOARD_RLED)
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
* defined. In that case, the usage by the board port is defined in
* include/board.h and src/cc1310_autoleds.c. The LEDs are used to
* encode OS-related events as follows:
*
* ------------------- ---------------------------- ---- ----
* SYMBOL Meaning GLED RLED
* ------------------- ---------------------------- ---- ---- */
#define LED_STARTED 0 /* NuttX has been started OFF OFF */
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF ON */
#define LED_IRQSENABLED 1 /* Interrupts enabled OFF ON */
#define LED_STACKCREATED 2 /* Idle stack created ON OFF */
#define LED_INIRQ 3 /* In an interrupt N/C GLOW */
#define LED_SIGNAL 3 /* In a signal handler N/C GLOW */
#define LED_ASSERTION 3 /* An assertion failed N/C GLOW */
#define LED_PANIC 4 /* The system has crashed OFF BLINK */
#undef LED_IDLE /* MCU is is sleep mode -Not used- */
/* Thus iF GLED is statically on, NuttX has successfully booted and is,
* apparently, running normally. A soft glow of the RLED means that the
* board is taking interrupts. If GLED is off and GLED is flashing at
* approximately 2Hz, then a fatal error has been detected and the system
* has halted.
*/
/* Button definitions *******************************************************/
/* Pin configuration ********************************************************/
#ifdef CONFIG_TIVA_UART0
/* UART0:
*
* The on-board XDS110 Debugger provide a USB virtual serial console using
* UART0 (PA0/U0RX and PA1/U0TX).
*/
# define GPIO_UART0_RX &g_gpio_uart0_rx
# define GPIO_UART0_TX &g_gpio_uart0_tx
#endif
/* DMA **********************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/* Pin configuration ********************************************************/
struct cc13xx_pinconfig_s; /* Forward reference */
#ifdef CONFIG_TIVA_UART0
extern const struct cc13xx_pinconfig_s g_gpio_uart0_rx;
extern const struct cc13xx_pinconfig_s g_gpio_uart0_tx;
#endif
#endif /* __CONFIG_NUCLEO_F303ZE_INCLUDE_BOARD_H */