nuttx/boards/arm/stm32/stm32f4discovery/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_BOARD_STM32F4_DISCOVERY

config STM32F4DISBB
	bool "STM32F4DIS-BB base board"
	default n
	---help---
		Select if you are using the STM32F4DIS-BB base board with the
		STM32F4Discovery.

config STM32_ROMFS
	bool "Automount baked-in ROMFS image"
	default n
	depends on FS_ROMFS
	---help---
		Select STM32_ROMFS_IMAGEFILE, STM32_ROMFS_DEV_MINOR, STM32_ROMFS_MOUNTPOINT

config STM32_ROMFS_DEV_MINOR
	int "Minor for the block device backing the data"
	depends on STM32_ROMFS
	default 64

config STM32_ROMFS_MOUNTPOINT
	string "Mountpoint of the custom romfs image"
	depends on STM32_ROMFS
	default "/rom"

config STM32_ROMFS_IMAGEFILE
	string "ROMFS image file to include into build"
	depends on STM32_ROMFS
	default "../../../rom.img"

config STM32F4DISCO_USBHOST_STACKSIZE
	int "USB host waiter stack size"
	default 1024
	depends on USBHOST

config STM32F4DISCO_USBHOST_PRIO
	int "USB host waiter task priority"
	default 100
	depends on USBHOST

config STM32F4DISCO_QETIMER
	int "Timer to use with QE encoder"
	default 2
	depends on SENSORS_QENCODER

config STM32F4DISCO_LIS3DSH
	bool "Enable LIS3DSH driver for the IMU on STM32F4Discovery (rev. MB997C)"
	default n
	depends on SPI
	depends on LIS3DSH
	default n
	---help---
		Select to create a LIS3DSH driver instance for the builtin accelerometer of
		STM32F4Discovery. Provides /dev/acc0 device file.
		Also see apps/examples/lis3dsh_reader.
		The LIS3DSH is available on the STM32F4Discovery rev. MB997C (see the board manual).

config PM_BUTTONS
	bool "PM button support"
	default n
	depends on PM && ARCH_IRQBUTTONS
	---help---
		Enable PM button EXTI interrupts to support PM testing

config PM_BUTTON_ACTIVITY
	int "Button PM activity weight"
	default 10
	depends on PM_BUTTONS
	---help---
		The activity weight to report to the power management subsystem when
		a button is pressed.

config PM_ALARM_SEC
	int "PM_STANDBY delay (seconds)"
	default 15
	depends on PM && RTC_ALARM
	---help---
		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY
		mode.

config PM_ALARM_NSEC
	int "PM_STANDBY delay (nanoseconds)"
	default 0
	depends on PM && RTC_ALARM
	---help---
		Number of additional nanoseconds to wait in PM_STANDBY before going
		to PM_STANDBY mode.

config PM_SLEEP_WAKEUP
	bool "PM_SLEEP wake-up alarm"
	default n
	depends on PM && RTC_ALARM
	---help---
		Wake-up of PM_SLEEP mode after a delay and resume normal operation.

config PM_SLEEP_WAKEUP_SEC
	int "PM_SLEEP delay (seconds)"
	default 10
	depends on PM && RTC_ALARM
	---help---
		Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode.

config PM_SLEEP_WAKEUP_NSEC
	int "PM_SLEEP delay (nanoseconds)"
	default 0
	depends on PM && RTC_ALARM
	---help---
		Number of additional nanoseconds to wait in PM_SLEEP before going to
		PM_STANDBY mode.

endif