nuttx

History

patacongo 0c22971606 Replace CONFIG_EXAMPLE with CONFIG_APP_DIR

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2893 42af7a65-404d-4744-a932-0658087f49c3

2010-08-28 18:06:51 +00:00

include

lpc2378 port contributed by Rommel Marcelo

2010-04-09 00:51:08 +00:00

nsh

Replace CONFIG_EXAMPLE with CONFIG_APP_DIR

2010-08-28 18:06:51 +00:00

ostest

Replace CONFIG_EXAMPLE with CONFIG_APP_DIR

2010-08-28 18:06:51 +00:00

src

Prep for 5.3 release

2010-04-11 19:44:36 +00:00

README.txt

lpc2378 port contributed by Rommel Marcelo

2010-04-09 00:51:08 +00:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.