nuttx

1wire

ds28e17.h edited online with Bitbucket

2018-04-05 12:08:56 +00:00

analog

drivers/analog: Add driver for digital to analog converted DAC7571.

2018-08-02 06:40:48 -06:00

audio

audio/audio_comp.c: Add the composite audio driver

2018-08-27 09:03:09 -06:00

binfmt

binfmt/: Mostly cosmetic changes from review of a previous commit.

2018-08-24 06:10:50 -06:00

can

arch/arm/src/samv7: Add ability for CAN BUS_OFF autorecovery according ISO11898-1:2015. With this change we added an ioctl for triggering the autorecovery sequence for BUS_OFF to the CAN-driver and the SAMV7 low-level driver. According the datasheet: If the device goes Bus_Off, it will set MCAN_CCCR.INIT of its own accord, stopping all bus activities. Once MCAN_CCCR.INIT has been cleared by the processor (application), the device will then wait for 129 occurrences of Bus Idle (129 * 11 consecutive recessive bits) before resuming normal operation. At the end of the Bus_Off recovery sequence, the Error Management Counters will be reset. During the waiting time after the resetting of MCAN_CCCR.INIT, each time a sequence of 11 recessive bits has been monitored, a Bit0 Error code is written to MCAN_PSR.LEC, enabling the processor to readily check up whether the CAN bus is stuck at dominant or continuously disturbed and to monitor the Bus_Off recovery sequence. MCAN_ECR.REC is used to count these sequences.

2018-07-04 07:48:59 -06:00

contactless

Add an instance argument to the SPIDEV definitions.

2017-04-29 12:26:52 -06:00

crypto

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

drivers

This commit adds a 1wire subsystem.

2018-04-04 10:57:36 -06:00

eeprom

drivers/eeprobom: EEPROM driver for AT24xx compatible EEPROMs.

2018-02-14 07:53:01 -06:00

fs

fs/spiffs: Add logic to dump the logical context of the FLASH.

2018-09-28 11:23:42 -06:00

i2c

include/nuttx/i2c/i2c_master.h: Add the standard speed macros.

2018-08-27 06:02:13 -06:00

input

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

ioexpander

include/nuttx/ioexpander/gpio.h: Fix build break introduced by commit 459d9f2851536

2018-08-30 07:25:26 -06:00

lcd

Remove trailing spaces at the end of lines.

2018-08-13 07:39:38 -06:00

leds

Squashed commit of the following:

2018-07-22 15:13:39 -06:00

lib

include/nuttx/lib/modlib.h: Eliminate warning: 'CONFIG_MODLIB_MAXDEPEND' is not defined'

2018-08-27 11:39:52 -06:00

mm

net/tcp/tcp_recvwindow.c: In order to receive data we must not only have IOBs available, but we must also have at least one IOB chain qentry available. Otherwise, we will advertise that we an buffer a lot of data when, in fact, we cannot. This is an expermental fix to a performance problem noted by Masayuki Ishikawa.

2018-09-22 09:33:29 -06:00

modem

…

mtd

drivers/mtd/ftl.c: Support initialization of an FTL block device with a custom name

2018-08-28 07:15:57 -06:00

net

net/procfs: Add support to provide MLD stats at /proc/net/mld. net/mld: Fix a couple more bugs found in further MLD testing.

2018-11-06 10:42:53 -06:00

nx

Make sure that labeling is used consistently in all function headers (part 3).

2018-02-01 12:17:03 -06:00

power

arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.

2018-09-21 06:44:23 -06:00

sensors

drivers/sensors/mlx90614.c: Add support for the Infrared Thermometer MLX90614

2018-10-28 15:58:14 -06:00

serial

drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.

2018-09-02 15:36:25 -06:00

spi

include/nuttx/spi/spi.h: Add a definition for a USBHOST SPI device. drivers/usbhost/usbhost_max3421e.c: Review and correct SPI locking usage.

2018-07-04 08:55:43 -06:00

syslog

syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic.

2018-06-07 16:29:16 -06:00

timers

Squashed commit of the following:

2018-08-27 11:55:30 -06:00

usb

include/nuttx/usb/audio.h: Fix warning: 'missing whitespace after the macro name'

2018-08-29 06:10:52 -06:00

video

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

wireless

Add missing function names in function headers.

2018-08-13 15:53:15 -06:00

.gitignore

…

addrenv.h

…

arch.h

Rename CONFIG_ARCH_HAVE_TRIGGER_HOOK to CONFIG_ARCH_HAVE_IRQTRIGGER

2018-08-25 09:10:30 -06:00

ascii.h

…

board.h

configs/boardctl.c: Add support for board_app_finalinitialize()

2018-08-28 15:34:31 -06:00

cancelpt.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

clock.h

Move clock_timespec_[add|subtract] to include/nuttx/clock.h

2018-08-27 06:04:04 -06:00

compiler.h

include/nuttx/compiler.h: fix warning: __cplusplus is not defined. Some gcc derived compiler do not define __cplusplus

2018-08-27 05:53:16 -06:00

environ.h

fs/proc and sched/environ: Add support for a procfs entry that will permit examining the environment of any task.

2018-08-10 10:16:39 -06:00

init.h

…

irq.h

sched/irq: Add support interrupt chains in NuttX. IRQ chain is very useful in these cases: (1) Multiple hardware connect to the same request line(e.g. PCI), (2) Need multiple driver to support one hardware block (like Linux MFD)

2018-08-24 15:10:23 -06:00

kmalloc.h

include/nuttx/kmalloc.h: Add {kumm/kmm}_calloc API. Add calloc API for manage user memory and kernel memory in Flat Build/Kernel Build without kernel heap.

2018-08-27 05:55:09 -06:00

kthread.h

Update some comments. Remove references to non-existent CONFIG_MAX_TASK_ARG.

2018-08-08 17:06:46 -06:00

mmcsd.h

…

module.h

…

mqueue.h

include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.

2018-09-26 06:58:08 -06:00

mutex.h

include/nuttx/mutex.h: Add inline wrapper functions to more clearly support semaphores when used as mutexs.

2018-08-27 06:26:11 -06:00

nuttx.h

Kconfig: Move 'option modules' from NSH_FILE_APPS to BUILD_LOADABLE

2018-08-27 07:06:57 -06:00

page.h

…

pgalloc.h

mm/mm_gran: Add a function to get information about the state of the granuale allocator.

2017-11-14 14:41:03 -06:00

poff.h

…

progmem.h

Merged in ebsong/nuttx (pull request #722 )

2018-09-21 03:18:38 +00:00

pthread.h

pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator.

2018-08-23 09:49:20 -06:00

random.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

sched_note.h

…

sched.h

include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.

2018-09-26 06:58:08 -06:00

scsi.h

…

sdio.h

drivers/mmcsd/Kconfig: three configuration settings were within ifdef/endif and led to warning: xxx selects xxxx which has unmet direct dependencies. Fix by moving settings to drivers/Kconfig and outside of the ifdef-endif. Also renamed CONFIG_SDIO_PREFLIGHT to CONFIG_ARCH_HAVE_SDIO_PREFLIGHT to follow naming of similar hidden architecture capability configurations.

2018-08-05 17:58:17 -06:00

semaphore.h

include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.

2018-09-26 06:58:08 -06:00

signal.h

include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.

2018-09-26 06:58:08 -06:00

spawn.h

…

spinlock.h

armv7-a, armv7-r, armv7-m: Add atomic read-add-write and read-subtract-write functions.

2018-02-04 12:22:03 -06:00

streams.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

symtab.h

…

time.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

tls.h

…

tree.h

include/: Remove dangling space at the end of lines.

2017-06-28 13:30:08 -06:00

userspace.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

vt100.h

…

wdog.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

wqueue.h

Squashed commit of the following:

2018-09-12 08:57:06 -06:00

zoneinfo.h

include/: Remove dangling space at the end of lines.

2017-06-28 13:30:08 -06:00