875 lines
18 KiB
Plaintext
875 lines
18 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see the file kconfig-language.txt in the NuttX tools repository.
|
|
#
|
|
|
|
if ARCH_BOARD_SPRESENSE
|
|
|
|
config BOARD_CUSTOM_PINCONFIG
|
|
bool
|
|
default y
|
|
|
|
config BOARD_USB_DISABLE_IN_DEEP_SLEEPING
|
|
bool
|
|
default y
|
|
---help---
|
|
Due to the system specification, it's impossible to enter the deep
|
|
sleeping mode for the power saving as long as USB is attached. As
|
|
the workaround for this restriction, this configuration forces to be
|
|
disable the USB function in deep sleeping.
|
|
|
|
config CXD56_SPIFLASHSIZE
|
|
hex
|
|
default 0x400000
|
|
depends on CXD56_SFC
|
|
---help---
|
|
Specify the SPI flash total available size for the application.
|
|
This value is generally set half of SPI flash device capacity.
|
|
|
|
comment "Audio Options"
|
|
|
|
if AUDIO_CXD56 || CXD56_AUDIO
|
|
|
|
choice
|
|
prompt "Audio I2S settings"
|
|
default CXD56_I2S0
|
|
|
|
config CXD56_I2S0
|
|
bool "I2S0"
|
|
|
|
config CXD56_I2S1
|
|
bool "I2S1"
|
|
endchoice
|
|
|
|
menu "Audio baseband config settings"
|
|
|
|
choice
|
|
prompt "Audio analog block selection"
|
|
default CXD56_AUDIO_ANALOG_CXD5247
|
|
|
|
config CXD56_AUDIO_ANALOG_CXD5247
|
|
bool "CXD5247"
|
|
|
|
config CXD56_AUDIO_ANALOG_NONE
|
|
bool "System does not use audio analog block"
|
|
endchoice
|
|
|
|
if CXD56_AUDIO_ANALOG_CXD5247
|
|
|
|
menu "CXD5247 settings"
|
|
choice
|
|
prompt "X'tal frequency of the CXD5247"
|
|
default CXD56_AUDIO_XTAL_SEL_49_152MHZ
|
|
|
|
config CXD56_AUDIO_XTAL_SEL_24_576MHZ
|
|
bool "24.576MHz"
|
|
|
|
config CXD56_AUDIO_XTAL_SEL_49_152MHZ
|
|
bool "49.152MHz"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "MICBIAS voltage of the CXD5247"
|
|
default CXD56_AUDIO_MICBIAS_20V
|
|
|
|
config CXD56_AUDIO_MICBIAS_20V
|
|
bool "2.0V"
|
|
|
|
config CXD56_AUDIO_MICBIAS_28V
|
|
bool "2.8V"
|
|
endchoice
|
|
|
|
config CXD56_AUDIO_MIC_CHANNEL_SEL
|
|
hex "MIC channel select map"
|
|
default 0xFFFF4321
|
|
range 0 0xFFFFFFFF
|
|
---help---
|
|
This designates microphone input of the CXD5247 in matrix format.
|
|
One microphone can be assigned to multiple channels (CHs.)
|
|
(Example: When DMA transfer is performed in monaural mode,
|
|
AMIC1 is assigned to CH1 and CH2 and the same audio data is
|
|
transferred to the each channel)
|
|
|
|
choice
|
|
prompt "Output drive strength of MCLKOUT selection"
|
|
default CXD56_AUDIO_MCLKOUT_WEAKEST
|
|
|
|
config CXD56_AUDIO_MCLKOUT_WEAKEST
|
|
bool "2mA"
|
|
|
|
config CXD56_AUDIO_MCLKOUT_WEAKER
|
|
bool "4mA"
|
|
|
|
config CXD56_AUDIO_MCLKOUT_STRONGER
|
|
bool "6mA"
|
|
|
|
config CXD56_AUDIO_MCLKOUT_STRONGEST
|
|
bool "8mA"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Output drive strength of CLKOUT_DMIC selection"
|
|
default CXD56_AUDIO_CLKOUT_DMIC_WEAKEST
|
|
|
|
config CXD56_AUDIO_CLKOUT_DMIC_WEAKEST
|
|
bool "2mA"
|
|
|
|
config CXD56_AUDIO_CLKOUT_DMIC_WEAKER
|
|
bool "4mA"
|
|
|
|
config CXD56_AUDIO_CLKOUT_DMIC_STRONGER
|
|
bool "6mA"
|
|
|
|
config CXD56_AUDIO_CLKOUT_DMIC_STRONGEST
|
|
bool "8mA"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Output drive strength of DA_DATA selection"
|
|
default CXD56_AUDIO_DA_DATA_WEAKEST
|
|
|
|
config CXD56_AUDIO_DA_DATA_WEAKEST
|
|
bool "2mA"
|
|
|
|
config CXD56_AUDIO_DA_DATA_WEAKER
|
|
bool "4mA"
|
|
|
|
config CXD56_AUDIO_DA_DATA_STRONGER
|
|
bool "6mA"
|
|
|
|
config CXD56_AUDIO_DA_DATA_STRONGEST
|
|
bool "8mA"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Output drive strength of GPO_A selection"
|
|
default CXD56_AUDIO_GPO_A_WEAKEST
|
|
|
|
config CXD56_AUDIO_GPO_A_WEAKEST
|
|
bool "2mA"
|
|
|
|
config CXD56_AUDIO_GPO_A_WEAKER
|
|
bool "4mA"
|
|
|
|
config CXD56_AUDIO_GPO_A_STRONGER
|
|
bool "6mA"
|
|
|
|
config CXD56_AUDIO_GPO_A_STRONGEST
|
|
bool "8mA"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Input source of Cascaded Integrator-Comb filter selection"
|
|
default CXD56_AUDIO_CIC_IN_SEL_CXD
|
|
|
|
config CXD56_AUDIO_CIC_IN_SEL_CXD
|
|
bool "from CXD5247"
|
|
|
|
config CXD56_AUDIO_CIC_IN_SEL_DMIC
|
|
bool "from DMIC"
|
|
|
|
config CXD56_AUDIO_CIC_IN_SEL_NONE
|
|
bool "No Cascaded Integrator-Comb filter input"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Drive currents of PDM signals"
|
|
default CXD56_AUDIO_PDM_LOWEMI_2MA
|
|
|
|
config CXD56_AUDIO_PDM_LOWEMI_2MA
|
|
bool "2mA"
|
|
|
|
config CXD56_AUDIO_PDM_LOWEMI_4MA
|
|
bool "4mA"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "HPADC mic bias selection"
|
|
default CXD56_AUDIO_HPADC_MIC_BIAS_OFF
|
|
---help---
|
|
This setting depends on a circuit board configuration.
|
|
Set "Microphone bias is enabled" when a microphone connected to
|
|
HPADC should be applied with voltage from the CXD5247.
|
|
Otherwise, set "Microphone bias is disabled".
|
|
|
|
config CXD56_AUDIO_HPADC_MIC_BIAS_ON
|
|
bool "Microphone bias is enabled"
|
|
|
|
config CXD56_AUDIO_HPADC_MIC_BIAS_OFF
|
|
bool "Microphone bias is disabled"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Version of the CXD5247"
|
|
default CXD56_CXD5247_VER_ES4
|
|
|
|
config CXD56_CXD5247_VER_ES2
|
|
bool "ES Version 2.0"
|
|
|
|
config CXD56_CXD5247_VER_ES3
|
|
bool "ES Version 3.0"
|
|
|
|
config CXD56_CXD5247_VER_ES4
|
|
bool "ES Version 4.0"
|
|
endchoice
|
|
|
|
if CXD56_CXD5247_VER_ES4
|
|
choice
|
|
prompt "Speaker time split on drive selection"
|
|
default CXD56_AUDIO_SP_SPLIT_SHORTEST
|
|
|
|
config CXD56_AUDIO_SP_SPLIT_SHORTEST
|
|
bool "shortest"
|
|
|
|
config CXD56_AUDIO_SP_SPLIT_SHORT
|
|
bool "short"
|
|
|
|
config CXD56_AUDIO_SP_SPLIT_LONG
|
|
bool "long"
|
|
|
|
config CXD56_AUDIO_SP_SPLIT_LONGEST
|
|
bool "longest"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Speaker drive mode selection"
|
|
default CXD56_AUDIO_SP_DRV_LINEOUT
|
|
|
|
config CXD56_AUDIO_SP_DRV_4DRIVERT
|
|
bool "4Driver(SPK)"
|
|
|
|
config CXD56_AUDIO_SP_DRV_2DRIVERT
|
|
bool "2Driver"
|
|
|
|
config CXD56_AUDIO_SP_DRV_1DRIVERT
|
|
bool "1Driver(HP)"
|
|
|
|
config CXD56_AUDIO_SP_DRV_LINEOUT
|
|
bool "Lineout"
|
|
endchoice
|
|
endif # CXD56_CXD5247_VER_ES4
|
|
endmenu
|
|
endif # CXD56_AUDIO_ANALOG_CXD5247
|
|
|
|
menu "I2S settings"
|
|
|
|
if CXD56_I2S0
|
|
choice
|
|
prompt "I2S0 device mode selection"
|
|
default CXD56_AUDIO_I2S_DEVICE_1_SLAVE
|
|
---help---
|
|
This designates ports and clock modes that are connected
|
|
as interfaces for PCM signal input and output.
|
|
|
|
config CXD56_AUDIO_I2S_DEVICE_1_SLAVE
|
|
bool "I2S0 Slave mode"
|
|
|
|
config CXD56_AUDIO_I2S_DEVICE_1_MASTER
|
|
bool "I2S0 Master mode"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "I2S0 format type selection"
|
|
default CXD56_AUDIO_I2S_FORMAT_1_I2S
|
|
---help---
|
|
This designates the format of PCM signals on I2S.
|
|
|
|
config CXD56_AUDIO_I2S_FORMAT_1_I2S
|
|
bool "I2S format"
|
|
|
|
config CXD56_AUDIO_I2S_FORMAT_1_LEFT
|
|
bool "Left Justified format"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "I2S0 bypass mode selection"
|
|
default CXD56_AUDIO_I2S_BYPASS_MODE_1_DISABLE
|
|
---help---
|
|
This designates the bypass mode of the sampling rate converter.
|
|
To improve sound quality, set it to "Enable".
|
|
The bypass mode can be enable when audio clk_mode is Hi-Res mode,
|
|
and I2S device mode is master mode and rate is 192kHz(192000).
|
|
|
|
config CXD56_AUDIO_I2S_BYPASS_MODE_1_ENABLE
|
|
bool "Enable bypass"
|
|
|
|
config CXD56_AUDIO_I2S_BYPASS_MODE_1_DISABLE
|
|
bool "Disable bypass"
|
|
endchoice
|
|
|
|
config CXD56_AUDIO_I2S_RATE_1
|
|
int "I2S0 data rate"
|
|
default 48000
|
|
range 48000 192000
|
|
---help---
|
|
This designates input and output data rate of I2S.
|
|
The maximum rate is 192000.
|
|
|
|
endif # CXD56_I2S0
|
|
|
|
if CXD56_I2S1
|
|
choice
|
|
prompt "I2S1 device mode selection"
|
|
default CXD56_AUDIO_I2S_DEVICE_2_SLAVE
|
|
---help---
|
|
This designates ports and clock modes that are connected
|
|
as interfaces for PCM signal input and output.
|
|
|
|
config CXD56_AUDIO_I2S_DEVICE_2_SLAVE
|
|
bool "I2S1 Slave mode"
|
|
|
|
config CXD56_AUDIO_I2S_DEVICE_2_MASTER
|
|
bool "I2S1 Master mode"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "I2S1 format type selection"
|
|
default CXD56_AUDIO_I2S_FORMAT_2_I2S
|
|
---help---
|
|
This designates the format of PCM signals on I2S0.
|
|
|
|
config CXD56_AUDIO_I2S_FORMAT_2_I2S
|
|
bool "I2S format"
|
|
|
|
config CXD56_AUDIO_I2S_FORMAT_2_LEFT
|
|
bool "Left Justified format"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "I2S1 bypass mode selection"
|
|
default CXD56_AUDIO_I2S_BYPASS_MODE_2_DISABLE
|
|
---help---
|
|
This designates the bypass mode of the sampling rate converter.
|
|
To improve sound quality, set it to "Enable".
|
|
The bypass mode can be enable when audio clk_mode is Hi-Res mode,
|
|
and I2S device mode is master mode and rate is 192kHz(192000).
|
|
|
|
config CXD56_AUDIO_I2S_BYPASS_MODE_2_ENABLE
|
|
bool "Enable bypass"
|
|
|
|
config CXD56_AUDIO_I2S_BYPASS_MODE_2_DISABLE
|
|
bool "Disable bypass"
|
|
endchoice
|
|
|
|
config CXD56_AUDIO_I2S_RATE_2
|
|
int "I2S1 data rate"
|
|
default 48000
|
|
range 48000 192000
|
|
---help---
|
|
This designates input and output data rate of I2S1.
|
|
The maximum rate is 192000.
|
|
|
|
endif # CXD56_I2S1
|
|
|
|
choice
|
|
prompt "Drive currents of I2S signals"
|
|
default CXD56_AUDIO_I2S_LOWEMI_2MA
|
|
|
|
config CXD56_AUDIO_I2S_LOWEMI_2MA
|
|
bool "2mA"
|
|
|
|
config CXD56_AUDIO_I2S_LOWEMI_4MA
|
|
bool "4mA"
|
|
endchoice
|
|
endmenu
|
|
|
|
choice
|
|
prompt "ON/OFF of Automatic Level Control/Sound Pressure Counter selection"
|
|
default CXD56_AUDIO_ALC_SPC_SEL_OFF
|
|
|
|
config CXD56_AUDIO_ALC_SPC_SEL_OFF
|
|
bool "All OFF"
|
|
|
|
config CXD56_AUDIO_ALC_SPC_SEL_ALC
|
|
bool "Automatic Level Control ON"
|
|
|
|
config CXD56_AUDIO_ALC_SPC_SEL_SPC
|
|
bool "Sound Pressure Counter ON"
|
|
endchoice
|
|
|
|
if CXD56_AUDIO_ALC_SPC_SEL_ALC
|
|
menu "Automatic Level Control setting"
|
|
config CXD56_AUDIO_ALC_KNEE
|
|
int "Knee levels of Automatic Level Control.[(1/10)dB]"
|
|
default -40
|
|
range -635 0
|
|
---help---
|
|
This command sets integer values 10 times larger than knee levels of
|
|
Automatic Level Control. (step width: 0.5 dB) When a value within the
|
|
range in the table below with a number other than 0 or 5 in one's
|
|
place is designated, it will be regarded as a integer value round up
|
|
to zero or five in the one's place. For example, when "-24" is
|
|
designated, the value will be regarded as "-20".
|
|
|
|
config CXD56_AUDIO_ALC_TARGET
|
|
int "Target level of Automatic Level Control.[dB]"
|
|
default 0
|
|
range -63 0
|
|
endmenu
|
|
endif # CXD56_AUDIO_ALC_SPC_SEL_ALC
|
|
|
|
if CXD56_AUDIO_ALC_SPC_SEL_SPC
|
|
menu "Sound Pressure Conter setting"
|
|
config CXD56_AUDIO_SPC_LIMIT
|
|
int "Limit levels of Sound Pressure Counter.[(1/10)dB]"
|
|
default 0
|
|
range -250 0
|
|
---help---
|
|
This command sets integer values 10 times larger than limit levels of
|
|
Sound Pressure Counter. (step width: 0.5 dB) When a value within the
|
|
range in the table below with a number other than 0 or 5 in one's
|
|
place is designated, it will be regarded as a integer value round up
|
|
to zero or five in the one's place. For example, when "-24" is
|
|
designated, the value will be regarded as "-20".
|
|
endmenu
|
|
endif # CXD56_AUDIO_ALC_SPC_SEL_SPC
|
|
|
|
choice
|
|
prompt "LR data format during DMA transfer"
|
|
default CXD56_AUDIO_DMA_DATA_FORMAT_RL
|
|
---help---
|
|
This sets the data arrangement of left channel and right channel in
|
|
the data format for 16 bit DMA transfer.
|
|
|
|
config CXD56_AUDIO_DMA_DATA_FORMAT_LR
|
|
bool "allocate left channel data in most significant bit"
|
|
|
|
config CXD56_AUDIO_DMA_DATA_FORMAT_RL
|
|
bool "allocate right channel data in most significant bit"
|
|
endchoice
|
|
|
|
config CXD56_AUDIO_MIC_BOOT_WAIT
|
|
int "Wait time for mic booting.[msec]"
|
|
default 1100
|
|
range 0 65535
|
|
|
|
endmenu
|
|
endif # Spresense Audio
|
|
|
|
config CXD56_IMAGEPROC
|
|
bool "Spresense Image Processor"
|
|
default n
|
|
select CXD56_GE2D
|
|
---help---
|
|
Enable support for accelerated format converter, rotation and so on.
|
|
using the CXD5602 image processing accelerator.
|
|
|
|
config SPRESENSE_EXTENSION
|
|
bool "Extension board"
|
|
default n
|
|
select CXD56_CUSTOM_PINCONFIG
|
|
---help---
|
|
Indicates to the configuration that an SPresense extension board is
|
|
present. If there is no extension board attached, the SPresense
|
|
may run in a low-power mode by default (as determined by the
|
|
CONFIG_CXD56_CUSTOM_PINCONFIG option). If an extension board is
|
|
present, then the SPresense will need to run at a higher power mode,
|
|
selected by this option.
|
|
|
|
if SPRESENSE_EXTENSION
|
|
config SDCARD_TXS02612
|
|
bool "SD Card TXS02612 port expander with voltage level translation"
|
|
default y
|
|
---help---
|
|
Enable TXS02612 Dual Voltage Level Translator for SD-Card interface.
|
|
This device is used in SPD-003C board.
|
|
|
|
if SDCARD_TXS02612
|
|
|
|
choice
|
|
prompt "TXS02612 port"
|
|
default SDCARD_TXS02612_PORT0
|
|
|
|
config SDCARD_TXS02612_PORT0
|
|
bool "Port 0"
|
|
|
|
config SDCARD_TXS02612_PORT1
|
|
bool "Port 1"
|
|
|
|
endchoice # "TXS02612 port"
|
|
|
|
endif # SDCARD_TXS02612
|
|
endif # SPRESENSE_EXTENSION
|
|
|
|
if LCD
|
|
|
|
choice
|
|
prompt "LCD SPI connection"
|
|
default LCD_ON_EXTENSION_BOARD
|
|
|
|
config LCD_ON_LTE_EXTENSION_BOARD
|
|
bool "LTE extension board: SPI3"
|
|
select CXD56_SPI3
|
|
---help---
|
|
Display connected to LTE extension board.
|
|
|
|
config LCD_ON_EXTENSION_BOARD
|
|
bool "Extension board: SPI4"
|
|
select CXD56_SPI4
|
|
select CXD56_DMAC_SPI4_TX
|
|
select CXD56_DMAC_SPI4_RX
|
|
---help---
|
|
Display connected to extension board.
|
|
|
|
config LCD_ON_MAIN_BOARD
|
|
bool "Main board: SPI5"
|
|
select CXD56_SPI5
|
|
select CXD56_DMAC_SPI5_TX
|
|
select CXD56_DMAC_SPI5_RX
|
|
---help---
|
|
Display connected to main board.
|
|
|
|
endchoice
|
|
|
|
if LCD_ON_MAIN_BOARD
|
|
|
|
choice
|
|
prompt "LCD ILI934x RST Pin selection"
|
|
default LCD_RSTPIN_I2S0_BCK
|
|
|
|
config LCD_RSTPIN_UART2_TX
|
|
bool "UART2_TX (D01) PIN"
|
|
|
|
config LCD_RSTPIN_UART2_RX
|
|
bool "UART2_RX (D00) PIN"
|
|
|
|
config LCD_RSTPIN_UART2_RTS
|
|
bool "UART2_RTS (D28) PIN"
|
|
|
|
config LCD_RSTPIN_UART2_CTS
|
|
bool "UART2_CTS (D27) PIN"
|
|
|
|
config LCD_RSTPIN_I2S0_BCK
|
|
bool "I2S0_BCK (D26) PIN"
|
|
|
|
config LCD_RSTPIN_I2S0_LRCK
|
|
bool "I2S0_LRCK (D25) PIN"
|
|
|
|
config LCD_RSTPIN_SEN_IRQ_IN
|
|
bool "SEN_IRQ_IN (D22) PIN"
|
|
|
|
config LCD_RSTPIN_EMMC_DATA3
|
|
bool "EMMC_DATA3 (D21) PIN"
|
|
|
|
config LCD_RSTPIN_EMMC_DATA2
|
|
bool "EMMC_DATA2 (D20) PIN"
|
|
|
|
config LCD_RSTPIN_I2S0_DATA_IN
|
|
bool "I2S0_DATA_IN (D19) PIN"
|
|
|
|
config LCD_RSTPIN_I2S0_DATA_OUT
|
|
bool "I2S0_DATA_OUT (D18) PIN"
|
|
|
|
config LCD_RSTPIN_I2C0_SCL
|
|
bool "I2C0_SCL (D15) PIN"
|
|
|
|
config LCD_RSTPIN_I2C0_SDA
|
|
bool "I2C0_SDA (D14) PIN"
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "LCD ILI934x DC Pin selection"
|
|
default LCD_DCPIN_I2S0_LRCK
|
|
|
|
config LCD_DCPIN_UART2_TX
|
|
bool "UART2_TX (D01) PIN"
|
|
|
|
config LCD_DCPIN_UART2_RX
|
|
bool "UART2_RX (D00) PIN"
|
|
|
|
config LCD_DCPIN_UART2_RTS
|
|
bool "UART2_RTS (D28) PIN"
|
|
|
|
config LCD_DCPIN_UART2_CTS
|
|
bool "UART2_CTS (D27) PIN"
|
|
|
|
config LCD_DCPIN_I2S0_BCK
|
|
bool "I2S0_BCK (D26) PIN"
|
|
|
|
config LCD_DCPIN_I2S0_LRCK
|
|
bool "I2S0_LRCK (D25) PIN"
|
|
|
|
config LCD_DCPIN_SEN_IRQ_IN
|
|
bool "SEN_IRQ_IN (D22) PIN"
|
|
|
|
config LCD_DCPIN_EMMC_DATA3
|
|
bool "EMMC_DATA3 (D21) PIN"
|
|
|
|
config LCD_DCPIN_EMMC_DATA2
|
|
bool "EMMC_DATA2 (D20) PIN"
|
|
|
|
config LCD_DCPIN_I2S0_DATA_IN
|
|
bool "I2S0_DATA_IN (D19) PIN"
|
|
|
|
config LCD_DCPIN_I2S0_DATA_OUT
|
|
bool "I2S0_DATA_OUT (D18) PIN"
|
|
|
|
config LCD_DCPIN_I2C0_SCL
|
|
bool "I2C0_SCL (D15) PIN"
|
|
|
|
config LCD_DCPIN_I2C0_SDA
|
|
bool "I2C0_SDA (D14) PIN"
|
|
|
|
endchoice
|
|
|
|
endif
|
|
|
|
if LCD_ON_EXTENSION_BOARD || LCD_ON_LTE_EXTENSION_BOARD
|
|
|
|
choice
|
|
prompt "LCD ILI934x RST Pin selection"
|
|
default LCD_RSTPIN_SPI2_MISO
|
|
|
|
config LCD_RSTPIN_I2C0_SCL_E
|
|
bool "I2C0_SCL (D15) PIN"
|
|
|
|
config LCD_RSTPIN_I2C0_SDA_E
|
|
bool "I2C0_SDA (D14) PIN"
|
|
|
|
config LCD_RSTPIN_PWM2
|
|
bool "PWM2 (D09) PIN"
|
|
|
|
config LCD_RSTPIN_SPI2_MISO
|
|
bool "SPI2_MISO (D08) PIN"
|
|
|
|
config LCD_RSTPIN_SPI3_CS1_X
|
|
bool "SPI3_CS1_X (D07) PIN"
|
|
|
|
config LCD_RSTPIN_PWM0
|
|
bool "PWM0 (D06) PIN"
|
|
|
|
config LCD_RSTPIN_PWM1
|
|
bool "PWM1 (D05) PIN"
|
|
|
|
config LCD_RSTPIN_SPI2_MOSI
|
|
bool "SPI2_MOSI (D04) PIN"
|
|
|
|
config LCD_RSTPIN_PWM3
|
|
bool "PWM3 (D03) PIN"
|
|
|
|
config LCD_RSTPIN_HIF_IRQ_OUT
|
|
bool "HIF_IRQ_OUT (D02) PIN"
|
|
|
|
config LCD_RSTPIN_UART2_TX_E
|
|
bool "UART2_TX (D01) PIN"
|
|
|
|
config LCD_RSTPIN_UART2_RX_E
|
|
bool "UART2_RX (D00) PIN"
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "LCD ILI934x DC Pin selection"
|
|
default LCD_DCPIN_PWM2
|
|
|
|
config LCD_DCPIN_I2C0_SCL_E
|
|
bool "I2C0_SCL (D15) PIN"
|
|
|
|
config LCD_DCPIN_I2C0_SDA_E
|
|
bool "I2C0_SDA (D14) PIN"
|
|
|
|
config LCD_DCPIN_PWM2
|
|
bool "PWM2 (D09) PIN"
|
|
|
|
config LCD_DCPIN_SPI2_MISO
|
|
bool "SPI2_MISO (D08) PIN"
|
|
|
|
config LCD_DCPIN_SPI3_CS1_X
|
|
bool "SPI3_CS1_X (D07) PIN"
|
|
|
|
config LCD_DCPIN_PWM0
|
|
bool "PWM0 (D06) PIN"
|
|
|
|
config LCD_DCPIN_PWM1
|
|
bool "PWM1 (D05) PIN"
|
|
|
|
config LCD_DCPIN_SPI2_MOSI
|
|
bool "SPI2_MOSI (D04) PIN"
|
|
|
|
config LCD_DCPIN_PWM3
|
|
bool "PWM3 (D03) PIN"
|
|
|
|
config LCD_DCPIN_HIF_IRQ_OUT
|
|
bool "HIF_IRQ_OUT (D02) PIN"
|
|
|
|
config LCD_DCPIN_UART2_TX_E
|
|
bool "UART2_TX (D01) PIN"
|
|
|
|
config LCD_DCPIN_UART2_RX_E
|
|
bool "UART2_RX (D00) PIN"
|
|
|
|
endchoice
|
|
|
|
endif
|
|
|
|
endif
|
|
|
|
choice
|
|
prompt "Spresense Wi-Fi Add-on board (iS110B)"
|
|
default WIFI_BOARD_IS110B_HARDWARE_VERSION_10A
|
|
---help---
|
|
Specify the hardware version of Wi-Fi Add-on board (iS110B)
|
|
|
|
config WIFI_BOARD_IS110B_HARDWARE_VERSION_10A
|
|
bool "WIFI Board iS110B v1.0A"
|
|
|
|
config WIFI_BOARD_IS110B_HARDWARE_VERSION_10B
|
|
bool "WIFI Board iS110B v1.0B"
|
|
|
|
config WIFI_BOARD_IS110B_HARDWARE_VERSION_10C
|
|
bool "WIFI Board iS110B v1.0C"
|
|
endchoice
|
|
|
|
comment "LTE Options"
|
|
|
|
menuconfig CXD56_LTE
|
|
bool "LTE"
|
|
default n
|
|
|
|
if CXD56_LTE
|
|
|
|
choice
|
|
prompt "LTE SPI selection"
|
|
default CXD56_LTE_SPI4
|
|
|
|
config CXD56_LTE_SPI4
|
|
bool "Use SPI4"
|
|
select CXD56_SPI4
|
|
|
|
config CXD56_LTE_SPI5
|
|
bool "Use SPI5"
|
|
select CXD56_SPI5
|
|
endchoice
|
|
|
|
if CXD56_LTE_SPI4
|
|
|
|
config CXD56_LTE_SPI4_DMAC
|
|
bool "Use DMAC for SPI4"
|
|
default y
|
|
select CXD56_DMAC_SPI4_TX
|
|
select CXD56_DMAC_SPI4_RX
|
|
|
|
endif # CXD56_LTE_SPI4
|
|
|
|
if CXD56_LTE_SPI5
|
|
|
|
config CXD56_LTE_SPI5_DMAC
|
|
bool "Use DMAC for SPI5"
|
|
default y
|
|
select CXD56_DMAC_SPI5_TX
|
|
select CXD56_DMAC_SPI5_RX
|
|
|
|
endif # CXD56_LTE_SPI5
|
|
|
|
config CXD56_LTE_LATE_INITIALIZE
|
|
bool "Alt1250 driver late initialize"
|
|
default n
|
|
---help---
|
|
LTE driver can be initialized on an application code after system booted up
|
|
by enabling this configuration switch.
|
|
|
|
endif # CXD56_LTE
|
|
|
|
config CXD56_EMMC_LATE_INITIALIZE
|
|
bool "eMMC driver late initialize"
|
|
default n
|
|
depends on CXD56_EMMC
|
|
---help---
|
|
eMMC driver can be initialized on an application code after system booted up
|
|
by enabling this configuration switch.
|
|
|
|
config CXD56_BINARY
|
|
bool "spk binary format"
|
|
default n
|
|
---help---
|
|
Create nuttx.spk binary format used on spresense board and boards
|
|
based on cxd56xx arch.
|
|
|
|
config CXD56_CAMERA_LATE_INITIALIZE
|
|
bool "Camera drivers late initialization"
|
|
default n
|
|
depends on CXD56_CISIF
|
|
---help---
|
|
The camera drivers can be initialized on an application code after system booted up
|
|
by enabling this configuration switch.
|
|
|
|
config CXD56_SDCARD_AUTOMOUNT
|
|
bool "SDCARD automounter"
|
|
default n
|
|
depends on FS_AUTOMOUNTER && CXD56_SDIO
|
|
|
|
if CXD56_SDCARD_AUTOMOUNT
|
|
|
|
config CXD56_SDCARD_AUTOMOUNT_FSTYPE
|
|
string "SDCARD file system type"
|
|
default "vfat"
|
|
|
|
config CXD56_SDCARD_AUTOMOUNT_BLKDEV
|
|
string "SDCARD block device"
|
|
default "/dev/mmcsd0"
|
|
|
|
config CXD56_SDCARD_AUTOMOUNT_MOUNTPOINT
|
|
string "SDCARD mount point"
|
|
default "/mnt/sd0"
|
|
|
|
config CXD56_SDCARD_AUTOMOUNT_DDELAY
|
|
int "SDCARD debounce delay (milliseconds)"
|
|
default 1000
|
|
|
|
config CXD56_SDCARD_AUTOMOUNT_UDELAY
|
|
int "SDCARD unmount retry delay (milliseconds)"
|
|
default 2000
|
|
|
|
endif # CXD56_SDCARD_AUTOMOUNT
|
|
|
|
choice
|
|
prompt "eMMC Power Pin selection"
|
|
default CXD56_EMMC_POWER_PIN_NONE
|
|
|
|
config CXD56_EMMC_POWER_PIN_NONE
|
|
bool "None"
|
|
|
|
config CXD56_EMMC_POWER_PIN_I2S0_BCK
|
|
bool "Use PIN I2S0_BCK"
|
|
|
|
config CXD56_EMMC_POWER_PIN_UART2_CTS
|
|
bool "Use PIN UART2_CTS"
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "BLE1507 Add-on board Reset Pin selection"
|
|
default CXD56_BLE1507_RESET_PIN_NONE
|
|
|
|
config CXD56_BLE1507_RESET_PIN_NONE
|
|
bool "None"
|
|
|
|
config CXD56_BLE1507_RESET_PIN_I2S0_DATA_IN
|
|
bool "Use PIN I2S0_DATA_IN"
|
|
|
|
config CXD56_BLE1507_RESET_PIN_EMMC_DATA2
|
|
bool "Use PIN EMMC_DATA2"
|
|
|
|
endchoice
|
|
|
|
config CXD56_GNSS_ADDON
|
|
bool "CXD5610 GNSS Add-on board"
|
|
default n
|
|
depends on SENSORS_CXD5610_GNSS && CXD56_I2C0 && !CXD56_I2C0_SCUSEQ
|
|
---help---
|
|
The CXD5610 GNSS Add-on driver can be registered.
|
|
|
|
if CXD56_GNSS_ADDON
|
|
|
|
config CXD56_GNSS_ADDON_LATE_INITIALIZE
|
|
bool "CXD5610 GNSS driver late initialization"
|
|
default n
|
|
---help---
|
|
The CXD5610 gnss driver can be initialized on an application code
|
|
after system booted up by enabling this configuration switch.
|
|
|
|
endif # CXD56_GNSS_ADDON
|
|
|
|
endif
|