f5f0af4f9c
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com> |
||
---|---|---|
.. | ||
arm | ||
arm64 | ||
avr | ||
ceva | ||
dummy | ||
hc | ||
mips | ||
misoc | ||
or1k | ||
renesas | ||
risc-v | ||
sim | ||
sparc | ||
x86 | ||
x86_64 | ||
xtensa | ||
z16 | ||
z80 | ||
Kconfig | ||
README.txt |
Architecture-Specific Code ^^^^^^^^^^^^^^^^^^^^^^^^^^ Table of Contents ^^^^^^^^^^^^^^^^^ o Architecture-Specific Code o Summary of Files o Supported Architectures o Configuring NuttX Architecture-Specific Code ^^^^^^^^^^^^^^^^^^^^^^^^^^ The NuttX configuration consists of: o Processor architecture specific files. These are the files contained in the arch/<arch-name>/ directory discussed in this README. o Chip/SoC specific files. Each processor architecture is embedded in chip or System-on-a-Chip (SoC) architecture. The full chip architecture includes the processor architecture plus chip-specific interrupt logic, general purpose I/O (GPIO) logic, and specialized, internal peripherals (such as UARTs, USB, etc.). These chip-specific files are contained within chip-specific sub-directories in the arch/<arch-name>/ directory and are selected via the CONFIG_ARCH_name selection o Board specific files. In order to be usable, the chip must be contained in a board environment. The board configuration defines additional properties of the board including such things as peripheral LEDs, external peripherals (such as network, USB, etc.). These board-specific configuration files can be found in the boards/<arch>/<chip>/<board> sub-directories. This README will address the processor architecture specific files that are contained in the arch/<arch-name>/ directory. The file include/nuttx/arch.h identifies all of the APIs that must be provided by this architecture specific logic. (It also includes arch/<arch-name>/arch.h as described below). Directory Structure ^^^^^^^^^^^^^^^^^^^ The arch/ directory contains architecture-specific logic. The complete board port is defined by the architecture-specific code in this directory plus the board-specific configurations in the boards/ directory. Each architecture must provide a subdirectory <arch-name> under arch/ with the following characteristics: <arch-name>/ |-- include/ | |--<chip-name>/ | | `-- (chip-specific header files) | |--<other-chips>/ | |-- arch.h | |-- irq.h | `-- types.h `-- src/ |--<chip-name>/ | `-- (chip-specific source files) |--<other-chips>/ |-- Makefile `-- (architecture-specific source files) Summary of Files ^^^^^^^^^^^^^^^^ include/<chip-name>/ This sub-directory contains chip-specific header files. include/arch.h This is a hook for any architecture specific definitions that may be needed by the system. It is included by include/nuttx/arch.h include/types.h This provides architecture/toolchain-specific definitions for standard types. This file should typedef: _int8_t, _uint8_t, _int16_t, _uint16_t, _int32_t, _uint32_t and if the architecture supports 64-bit integers: _int24_t, _uint24_t, _int64_t, _uint64_t NOTE that these type names have a leading underscore character. This file will be included (indirectly) by include/stdint.h and typedef'ed to the final name without the underscore character. This roundabout way of doings things allows the stdint.h to be removed from the include/ directory in the event that the user prefers to use the definitions provided by their toolchain header files. irqstate_t Must be defined to the size required to hold the interrupt enable/disable state. This file will be included by include/sys/types.h and be made available to all files. include/irq.h This file needs to define some architecture-specific functions (usually inline if the compiler supports inlining) and structures. These include: - struct xcptcontext. This structure represents the saved context of a thread. - irqstate_t up_irq_save(void) -- Used to disable all interrupts. - void up_irq_restore(irqstate_t flags) -- Used to restore interrupt enables to the same state as before up_irq_save was called. NOTE: These interfaces are not available to application code but can only be used within the operating system code. And, in general, these functions should *never* be called directly, not unless you know absolutely well what you are doing. Rather you should typically use the wrapper functions enter_critical_section() and leave_critical_section() as prototyped in include/nuttx/irq.h. This file must also define NR_IRQS, the total number of IRQs supported by the board. src/<chip-name>/ This sub-directory contains chip-specific source files. src/Makefile This makefile will be executed to build the targets src/libup.a and src/up_head.o. The up_head.o file holds the entry point into the system (power-on reset entry point, for example). It will be used in the final link with libup.a and other system archives to generate the final executable. Supported Architectures ^^^^^^^^^^^^^^^^^^^^^^^ NOTE: nuttx/Documentation/NuttX.html for current information about the state of these MCU ports. arch/sim - Linux/Cygwin simulation A user-mode port of NuttX to the x86 Linux platform is available. The purpose of this port is primarily to support OS feature development. This port does not support interrupts or a real timer (and hence no round robin scheduler). Otherwise, it is complete. arch/arm - ARM-based micro-controllers This directory holds common ARM architectures. At present, this includes the following subdirectories: Architecture Support arch/arm/include and arch/arm/src/common arch/arm/src/arm and arch/arm/include/arm arch/arm/src/armv7-a and arch/arm/include/armv6-m arch/arm/src/armv7-a and arch/arm/include/armv7-a arch/arm/src/armv7-m and arch/arm/include/armv7-m arch/arm/src/armv7-r and arch/arm/include/armv7-r MCU support arch/arm/include/a1x and arch/arm/src/a1x arch/arm/include/am335x and arch/arm/src/am335x arch/arm/include/c5471 and arch/arm/src/c5471 arch/arm/include/cxd56xx and arch/arm/src/cxd56xx arch/arm/include/dm320 and arch/arm/src/dm320 arch/arm/include/efm32 and arch/arm/src/efm32 arch/arm/include/imx1 and arch/arm/src/imx1 arch/arm/include/imx6 and arch/arm/src/imx6 arch/arm/include/imxrt and arch/arm/src/imxrt arch/arm/include/kinetis and arch/arm/src/kinetis arch/arm/include/kl and arch/arm/src/kl arch/arm/include/lc823450 and arch/arm/src/lc823450 arch/arm/include/lpc17xx_40xx and arch/arm/src/lpc17xx_40xx arch/arm/include/lpc214x and arch/arm/src/lpc214x arch/arm/include/lpc2378 and arch/arm/src/lpc2378 arch/arm/include/lpc31xx and arch/arm/src/lpc31xx arch/arm/include/lpc43xx and arch/arm/src/lpc43xx arch/arm/include/lpc54xx and arch/arm/src/lpc54xx arch/arm/include/max326xx and arch/arm/src/max326xx arch/arm/include/moxart and arch/arm/src/moxart arch/arm/include/nrf52 and arch/arm/src/nrf52 arch/arm/include/nuc1xx and arch/arm/src/nuc1xx arch/arm/include/s32k1xx and arch/arm/src/s32k1xx arch/arm/include/sam34 and arch/arm/src/sam34 arch/arm/include/sama5 and arch/arm/src/sama5 arch/arm/include/samd2l2 and arch/arm/src/samd2l2 arch/arm/include/samd5e5 and arch/arm/src/samd5e5 arch/arm/include/samv7 and arch/arm/src/samv7 arch/arm/include/stm32 and arch/arm/src/stm32 arch/arm/include/stm32f0l0g0 and arch/arm/src/stm32f0l0g0 arch/arm/include/stm32f7 and arch/arm/src/stm32f7 arch/arm/include/stm32h7 and arch/arm/src/stm32h7 arch/arm/include/stm32l4 and arch/arm/src/stm32l4 arch/arm/include/str71x and arch/arm/src/str71x arch/arm/include/tiva and arch/arm/src/tiva arch/arm/include/tms570 and arch/arm/src/tms570 arch/arm/include/xmc4 and arch/arm/src/xmc4 arch/avr This directory is dedicated to ports to the Atmel AVR (8-bit) and AVR32 (32-bit) MCU families. STATUS: Under development. Architecture Support arch/avr/include/avr and arch/avr/src/avr arch/avr/include/avr32 and arch/avr/src/avr32 MCU support arch/avr/include/atmega and arch/avr/src/atmega arch/avr/include/at90usb and arch/avr/src/at90usb arch/avr/include/at32uc3 and arch/avr/src/at32uc3 arch/avr/include/xmega and arch/avr/src/xmega arch/hc This directory is dedicated to ports to the Freescale HC family. arch/arm/include/m9s12 and arch/arm/src/m9s12 arch/mips This directory is dedicated to ports to the MIPS family. Architecture Support arch/mips/include/mips32 and arch/mips/src/mips32 MCU support arch/mips/include/pic32mx and arch/mips/src/pic32mx arch/mips/include/pic32mz and arch/mips/src/pic32mz arch/misoc This directory is dedicated to ports to the Misoc family. MCU support arch/misoc/include/lm32 and arch/misoc/src/lm32 arch/misoc/include/minerva and arch/misoc/src/minerva arch/renesas - Support for Renesas and legacy Hitachi microcontrollers. This include SuperH and M16C. Architecture Support arch/renesas/include and arch/renesas/src/common MCU support arch/renesas/include/m16c and arch/renesas/src/m16c arch/renesas/include/rx65n and arch/renesas/src/rx65n arch/renesas/include/sh1 and arch/renesas/src/sh1 arch/or1k This directory is dedicated to ports to OpenRISC architectures. arch/or1k/include/mor1k and arch/or1k/src/mor1k arch/risc-v This directory is dedicated to ports to the RISC-V family. Architecture Support arch/risc-v/include and arch/risc-v/common MCU support arch/risc-v/include/fe310 and arch/risc-v/src/fe310 arch/risc-v/include/k210 and arch/risc-v/src/k210 arch/risc-v/include/litex and arch/risc-v/src/litex arch/x86 - Intel x86 architectures This directory holds related, 32- and 64-bit architectures from Intel. At present, this includes the following subdirectories: Architecture Support arch/x86/include and arch/x86/src/common MCU support arch/x86/include/i486 and arch/x86/src/i486 arch/x86/include/qemu and arch/x86/src/qemu arch/x86_64 - Intel x86 64-bit architectures This directory holds related 64-bit architectures from Intel. At present, this includes the following subdirectories: Architecture Support arch/x86_64/include and arch/x86_64/src/common MCU support arch/x86_64/include/intel64 and arch/x86_64/src/intel64 arch/x86_64/include/qemu and arch/x86_64/src/qemu arch/xtensa Implementations based on the Cadence® Tensilica® Xtensa® processors, such as the Xtensa LX6 dataplane processing units (DPUs). At present, this includes the following subdirectories: Common XTENSA support: arch/xtensa/include and arch/xtensa/src/common LX6 DPU support: arch/xtensa/include/lx6 and arch/xtensa/xtensa/lx6 Espressif ESP32 implementation of the LX6 DPU: arch/xtensa/include/esp32 and arch/xtensa/xtensa/esp32 arch/z16 - ZiLOG 16-bit processors This directory holds related, 16-bit architectures from ZiLOG. At present, this includes the following subdirectories: Architecture Support arch/z16/include and arch/z16/src/common MCU support arch/z16/include/z16f and arch/z16/src/z16f arch/z80 - ZiLOG 8-bit microcontrollers This directory holds related, 8-bit architectures from ZiLOG. At present, this includes the following subdirectories: Architecture Support arch/z80/include and arch/z80/src/common MCU support arch/z80/include/ez80 and arch/z80/src/ez80 arch/z80/include/z80 and arch/z80/src/z180 arch/z80/include/z8 and arch/z80/src/z8 arch/z80/include/z80 and arch/z80/src/z80