626 lines
25 KiB
C
626 lines
25 KiB
C
/****************************************************************************
|
||
* arch/mips/include/pic32mz/cp0.h
|
||
*
|
||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
****************************************************************************/
|
||
|
||
#ifndef __ARCH_MIPS_INCLUDE_PIC32MZ_CP0_H
|
||
#define __ARCH_MIPS_INCLUDE_PIC32MZ_CP0_H
|
||
|
||
/****************************************************************************
|
||
* Included Files
|
||
****************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
|
||
#include <arch/mips32/cp0.h>
|
||
|
||
/****************************************************************************
|
||
* Pre-processor Definitions
|
||
****************************************************************************/
|
||
/* CP0 Register Addresses ***************************************************/
|
||
|
||
#ifdef __ASSEMBLY__
|
||
|
||
# define PIC32MZ_CP0_INDEX $0,0 /* Index into TLB array */
|
||
# define PIC32MZ_CP0_RANDOM $1,0 /* Randomly index into TLB array */
|
||
# define PIC32MZ_CP0_ENTRYLO0 $2,0 /* Lower TLB entry, even pages */
|
||
# define PIC32MZ_CP0_ENTRYLO1 $3,0 /* Lower TLB entry, odd pages */
|
||
# define PIC32MZ_CP0_CONTEXT $4,0 /* Address of page table entry in memory */
|
||
# define PIC32MZ_CP0_USERLOCAL $4,2 /* User read/write register */
|
||
# define PIC32MZ_CP0_PAGEMASK $5,0 /* Controls the variable page sizes */
|
||
# define PIC32MZ_CP0_PAGEGRAIN $5,1 /* Enables support of 1 KB pages */
|
||
# define PIC32MZ_CP0_WIRED $6,0 /* Number of fixed TLB entries */
|
||
# define PIC32MZ_CP0_HWRENA $7,0 /* Enables access via RDHWR hardware registers */
|
||
# define PIC32MZ_CP0_BADVADDR $8,0 /* Address of most recent exception */
|
||
# define PIC32MZ_CP0_COUNT $9,0 /* Processor cycle count */
|
||
# define PIC32MZ_CP0_ENTRYHI $10,0 /* Upper TLB entry */
|
||
# define PIC32MZ_CP0_COMPARE $11,0 /* Timer interrupt control */
|
||
# define PIC32MZ_CP0_STATUS $12,0 /* Processor status and control */
|
||
# define PIC32MZ_CP0_INTCTL $12,1 /* Interrupt system status and control */
|
||
# define PIC32MZ_CP0_SRSCTL $12,2 /* Shadow register set status and control */
|
||
# define PIC32MZ_CP0_SRSMAP $12,3 /* Maps from vectored interrupt to a shadow set */
|
||
# define PIC32MZ_CP0_VIEWIPL $12,4 /* Priority level access */
|
||
# define PIC32MZ_CP0_SRSMAP2 $12,5 /* Vector number to shadow set mapping */
|
||
# define PIC32MZ_CP0_CAUSE $13,0 /* Cause of last general exception */
|
||
# define PIC32MZ_CP0_VIEWRIPL $13,4 /* RIPL accesss */
|
||
# define PIC32MZ_CP0_NESTEDEXC $13,5 /* Prior error and exception level */
|
||
# define PIC32MZ_CP0_EPC $14,0 /* Program counter at last exception */
|
||
# define PIC32MZ_CP0_NESTEDEPC $14,2 /* Prior EPC */
|
||
# define PIC32MZ_CP0_PRID $15,0 /* Processor identification and revision */
|
||
# define PIC32MZ_CP0_EBASE $15,1 /* Exception vector base register */
|
||
# define PIC32MZ_CP0_CDMMBASE $15,2 /* Common device memory map base */
|
||
# define PIC32MZ_CP0_CONFIG $16,0 /* Configuration register */
|
||
# define PIC32MZ_CP0_CONFIG1 $16,1 /* Configuration register 1 */
|
||
# define PIC32MZ_CP0_CONFIG2 $16,2 /* Configuration register 3 */
|
||
# define PIC32MZ_CP0_CONFIG3 $16,3 /* Configuration register 3 */
|
||
# define PIC32MZ_CP0_CONFIG4 $16,4 /* Configuration register 4 */
|
||
# define PIC32MZ_CP0_CONFIG5 $16,5 /* Configuration register 5 */
|
||
# define PIC32MZ_CP0_CONFIG7 $16,7 /* Configuration register 7 */
|
||
# define PIC32MZ_CP0_LLADDR $17,0 /* Load link address */
|
||
# define PIC32MZ_CP0_WATCHLO $18,0 /* Low-order watchpoint address */
|
||
# define PIC32MZ_CP0_WATCHHI $19,0 /* High-order watchpoint address */
|
||
# define PIC32MZ_CP0_DEBUG $23,0 /* Debug control and exception status */
|
||
# define PIC32MZ_CP0_TRACECTRL $23,1 /* EJTAG trace control */
|
||
# define PIC32MZ_CP0_TRACECTRL2 $23,2 /* EJTAG trace control 2 */
|
||
# define PIC32MZ_CP0_TRACEDATA1 $23,3 /* EJTAG user trace data 1 register */
|
||
# define PIC32MZ_CP0_TRACEBPC $23,4 /* EJTAG trace breakpoint register */
|
||
# define PIC32MZ_CP0_DEBUG2 $23,5 /* Debug control/exception status 2 */
|
||
# define PIC32MZ_CP0_DEPC $24,0 /* Program counter at last debug exception */
|
||
# define PIC32MZ_CP0_TRACEDATA2 $24,3 /* EJTAG user trace data 2 register */
|
||
# define PIC32MZ_CP0_PERFCTL0 $25,0 /* Performance counter 0 control */
|
||
# define PIC32MZ_CP0_PERFCNT0 $25,1 /* Performance counter 0 */
|
||
# define PIC32MZ_CP0_PERFCTL1 $25,2 /* Performance counter 1 control */
|
||
# define PIC32MZ_CP0_PERFCNT1 $25,3 /* Performance counter 1 */
|
||
# define PIC32MZ_CP0_ERRCTL $26,0 /* Test enable for cache RAM arrays */
|
||
# define PIC32MZ_CP0_TAGLO $28,0 /* Low-order portion of cache tag interface */
|
||
# define PIC32MZ_CP0_DATALO $28,1 /* Low-order portion of cache tag interface */
|
||
# define PIC32MZ_CP0_ERREPC $30,0 /* Program counter at last error */
|
||
# define PIC32MZ_CP0_DESAVE $31,0 /* Debug handler scratchpad register */
|
||
#endif
|
||
|
||
/* CP0 Registers ************************************************************/
|
||
|
||
/* Register Number: 0 Sel: 0 Name: Index
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 1 Sel: 0 Name: Random
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 2 Sel: 0 Name: EntryLo0
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 3 Sel: 0 Name: EntryLo1
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 4 Sel: 0 Name: Context
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 4 Sel: 2 Name: UserLocal
|
||
* Function: User read/write register
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 5 Sel: 0 Name: PageMask
|
||
* Function: Used for reading from and writing to the TLB
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 5 Sel: 1 Name: PageGrain
|
||
* Function: Enable or disable the read and execute inhibit bits in the
|
||
* EntryLo0 and EntryLo1 registers.
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 6 Sel: 0 Name: Wired
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 7 Sel: 0 Name: HWREna
|
||
* Function: Enables access via the RDHWR instruction to selected hardware
|
||
* registers in non-privileged mode.
|
||
* Compliance Level: (Reserved for future extensions)
|
||
*/
|
||
|
||
#define CP0_HWRENA_SHIFT (0) /* Bits 0-3: Enable access to a hardware resource */
|
||
#define CP0_HWRENA_MASK (15 << CP0_HWRENA_SHIFT)
|
||
# define CP0_HWRENA_BIT0 (1 << CP0_HWRENA_SHIFT)
|
||
# define CP0_HWRENA_BIT1 (2 << CP0_HWRENA_SHIFT)
|
||
# define CP0_HWRENA_BIT2 (4 << CP0_HWRENA_SHIFT)
|
||
# define CP0_HWRENA_BIT3 (8 << CP0_HWRENA_SHIFT)
|
||
#define CP0_HWRENA_ULR (1 << 29) /* Bit 29: User Local Register bit */
|
||
|
||
/* Register Number: 8 Sel: 0 Name: BadVAddr
|
||
* Function: Reports the address for the most recent address-related
|
||
* exception
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Register Number: 9 Sel: 0 Name: Count
|
||
* Function: Processor cycle count
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
/* Register Number: 10 Sel: 0 Name: EntryHi
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
*/
|
||
|
||
/* Register Number: 11 Sel: 0 Name: Compare
|
||
* Function: Timer interrupt control
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
/* Register Number: 12 Sel: 0 Name: Status
|
||
* Function: Processor status and control
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
* NOTES:
|
||
* 1. The following are reserved bits in the PIC32MZ:
|
||
* CP0_STATUS_UX Bit 5: Enables 64-bit user address space (Not MIPS32)
|
||
* CP0_STATUS_SX Bit 6: Enables 64-bit supervisor address space (Not MIPS32)
|
||
* CP0_STATUS_KX Bit 7: Enables 64-bit kernel address space (Not MIPS32)
|
||
* CP0_STATUS_IMPL Bits 16-17: Implementation dependent
|
||
* CP0_STATUS_PX Bit 23: Enables 64-bit operations (Not MIPS32)
|
||
* CP0_STATUS_FR Bit 26: Controls the floating point register mode (Not MIPS32)
|
||
* CP0_STATUS_MX Bit 24: Enables MDMX<4D> (Not MIPS32)
|
||
* CP0_STATUS_CU1 Bit 29: Controls access to coprocessor 1
|
||
* CP0_STATUS_CU2 Bit 30: Controls access to coprocessor 2
|
||
* CP0_STATUS_CU3 Bit 31: Controls access to coprocessor 3
|
||
*/
|
||
|
||
#undef CP0_STATUS_UX
|
||
#undef CP0_STATUS_SX
|
||
#undef CP0_STATUS_KX
|
||
#undef CP0_STATUS_IMPL
|
||
#undef CP0_STATUS_IMPL_SHIFT
|
||
#undef CP0_STATUS_IMPL_MASK
|
||
#undef CP0_STATUS_PX
|
||
#undef CP0_STATUS_FR
|
||
#undef CP0_STATUS_CU1
|
||
#undef CP0_STATUS_CU2
|
||
#undef CP0_STATUS_CU3
|
||
|
||
/* 2. The following field is of a different width. Apparently, it
|
||
* excludes the software interrupt bits.
|
||
*
|
||
* CP0_STATUS_IM Bits 8-15: Interrupt Mask
|
||
* Vs.
|
||
* CP0_STATUS_IPL Bits 10-16+18: Interrupt priority level
|
||
* Bits 8-9 reserved
|
||
*/
|
||
|
||
#define CP0_STATUS_IPL_SHIFT (10) /* Bits 10-16+18: Interrupt priority level */
|
||
#define CP0_STATUS_IPL_MASK (0x17f << CP0_STATUS_IPL_SHIFT)
|
||
|
||
/* 3. Supervisor mode not supported
|
||
* CP0_STATUS_KSU Bits 3-4: Operating mode (with supervisor mode)
|
||
*/
|
||
|
||
#undef CP0_STATUS_KSU_SUPER
|
||
|
||
/* Register Number: 12 Sel: 1 Name: IntCtl */
|
||
|
||
#define CP0_INTCTL_VS_SHIFT (5) /* Bits 5-9: Vector spacing bits */
|
||
#define CP0_INTCTL_VS_MASK (0x1f << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_0BYTES (0x00 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_32BYTES (0x01 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_64BYTES (0x02 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_128BYTES (0x04 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_256BYTES (0x08 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_512BYTES (0x10 << CP0_INTCTL_VS_SHIFT)
|
||
|
||
/* Register Number: 12 Sel: 2 Name: SRSCtl */
|
||
|
||
#define CP0_SRSCTL_CSS_SHIFT (0) /* Bits 0-3: Current shadow bit set */
|
||
#define CP0_SRSCTL_CSS_MASK (15 << CP0_SRSCTL_CSS_SHIFT)
|
||
#define CP0_SRSCTL_PSS_SHIFT (6) /* Bits 6-9: Previous shadow set */
|
||
#define CP0_SRSCTL_PSS_MASK (15 << CP0_SRSCTL_PSS_SHIFT)
|
||
#define CP0_SRSCTL_ESS_SHIFT (12) /* Bits 12-15: Exception shadow sets */
|
||
#define CP0_SRSCTL_ESS_MASK (15 << CP0_SRSCTL_ESS_SHIFT)
|
||
#define CP0_SRSCTL_EICSS_SHIFT (18) /* Bits 18-21: External interrupt controller shadow sets */
|
||
#define CP0_SRSCTL_EICSS_MASK (15 << CP0_SRSCTL_EICSS_SHIFT)
|
||
#define CP0_SRSCTL_HSS_SHIFT (26) /* Bits 26-29: High shadow sets */
|
||
#define CP0_SRSCTL_HSS_MASK (15 << CP0_SRSCTL_HSS_SHIFT)
|
||
# define CP0_SRSCTL_HSS_1SET (0 << CP0_SRSCTL_HSS_SHIFT) /* One shadow set (normal GPR set) */
|
||
# define CP0_SRSCTL_HSS_2SETS (1 << CP0_SRSCTL_HSS_SHIFT) /* Two shadow sets */
|
||
# define CP0_SRSCTL_HSS_4SETS (3 << CP0_SRSCTL_HSS_SHIFT) /* Four shadow sets */
|
||
|
||
/* Register Number: 12 Sel: 3 Name: SRSMap */
|
||
|
||
#define CP0_SRSMAP_SSV0_SHIFT (0) /* Bits 0-3: Shadow set vector 0 */
|
||
#define CP0_SRSMAP_SSV0_MASK (15 << CP0_SRSMAP_SSV0_SHIFT)
|
||
#define CP0_SRSMAP_SSV1_SHIFT (4) /* Bits 4-7: Shadow set vector 1 */
|
||
#define CP0_SRSMAP_SSV1_MASK (15 << CP0_SRSMAP_SSV1_SHIFT)
|
||
#define CP0_SRSMAP_SSV2_SHIFT (8) /* Bits 8-11: Shadow set vector 2 */
|
||
#define CP0_SRSMAP_SSV2_MASK (15 << CP0_SRSMAP_SSV2_SHIFT)
|
||
#define CP0_SRSMAP_SSV3_SHIFT (12) /* Bits 12-15: Shadow set vector 3 */
|
||
#define CP0_SRSMAP_SSV3_MASK (15 << CP0_SRSMAP_SSV3_SHIFT)
|
||
#define CP0_SRSMAP_SSV4_SHIFT (16) /* Bits 16-19: Shadow set vector 4 */
|
||
#define CP0_SRSMAP_SSV4_MASK (15 << CP0_SRSMAP_SSV4_SHIFT)
|
||
#define CP0_SRSMAP_SSV5_SHIFT (20) /* Bits 20-23: Shadow set vector 5 */
|
||
#define CP0_SRSMAP_SSV5_MASK (15 << CP0_SRSMAP_SSV5_SHIFT)
|
||
#define CP0_SRSMAP_SSV6_SHIFT (24) /* Bits 24-27: Shadow set vector 6 */
|
||
#define CP0_SRSMAP_SSV6_MASK (15 << CP0_SRSMAP_SSV6_SHIFT)
|
||
#define CP0_SRSMAP_SSV7_SHIFT (28) /* Bits 28-31: Shadow set vector 7 */
|
||
#define CP0_SRSMAP_SSV7_MASK (15 << CP0_SRSMAP_SSV7_SHIFT)
|
||
|
||
/* Register Number: 12 Sel: 4 Name: View_Ipl
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 12 Sel: 5 Name: SRSMap2
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 13 Sel: 0 Name: Cause
|
||
* Function: Cause of last general exception
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
* NOTES: The following bits are added in the PIC32:
|
||
*/
|
||
|
||
#define CP0_CAUSE_R (1 << 26) /* Bit 26: R bit */
|
||
#define CP0_CAUSE_DC (1 << 27) /* Bit 27: Disable count */
|
||
#define CP0_CAUSE_TI (1 << 30) /* Bit 30: Timer interrupt bit */
|
||
|
||
/* Register Number: 13 Sel: 4 Name: View_RIPL
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 13 Sel: 5 Name: NestedExc
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 14 Sel: 0 Name: EPC
|
||
* Function: Program counter at last exception
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
/* Register Number: 14 Sel: 2 Name: NestedEPC
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 15 Sel: 0 Name: PRId
|
||
* Function: Processor identification and revision
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
* NOTE: Slightly different bit interpretations of some fields:
|
||
*/
|
||
|
||
#define CP0_PRID_PATCH_SHIFT (5) /* Bits 0-1: Patch level */
|
||
#define CP0_PRID_PATCH_MASK (3 << CP0_PRID_PATCH_SHIFT)
|
||
#define CP0_PRID_MINOR_SHIFT (2) /* Bits 2-4: Minor revision number */
|
||
#define CP0_PRID_MINOR_MASK (7 << CP0_PRID_MINOR_SHIFT)
|
||
#define CP0_PRID_MAJOR_SHIFT (5) /* Bits 5-7: Major revision number */
|
||
#define CP0_PRID_MAJOR_MASK (7 << CP0_PRID_MAJOR_SHIFT)
|
||
|
||
#undef CP0_PRID_OPTIONS_SHIFT
|
||
#undef CP0_PRID_OPTIONS_MASK
|
||
|
||
/* Register Number: 15 Sel: 1 Name: EBASE */
|
||
|
||
#define CP_EBASE_CPUNUM_SHIFT (0) /* Bits 0-9: CPU number */
|
||
#define CP_EBASE_CPUNUM_MASK (0x3ff << CP_EBASE_CPUNUM_SHIFT)
|
||
#define CP_EBASE_SHIFT (12) /* Bits 30-31=10, Bits 12-29: Exception base */
|
||
#define CP_EBASE_MASK (0x3ffff << CP_EBASE_SHIFT)
|
||
|
||
/* Register Number: 15 Sel: 2 Name: CDMMBase
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 16 Sel: 0 Name: Config
|
||
* Function: Configuration register
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
* 1. PIC32MZ is always little-endian.
|
||
* 2. Implementation specific bits defined.
|
||
*/
|
||
|
||
#undef CP0_CONFIG_MT_NONE
|
||
#undef CP0_CONFIG_MT_TLB
|
||
#undef CP0_CONFIG_MT_BAT
|
||
|
||
#undef CP0_CONFIG_IMPL_SHIFT
|
||
#undef CP0_CONFIG_IMPL_MASK
|
||
|
||
#define CP0_CONFIG_DS (1 << 16) /* Dual SRAM bit */
|
||
#define CP0_CONFIG_BM (1 << 16) /* Burst Mode bit */
|
||
#define CP0_CONFIG_MM_SHIFT (17) /* Bits 17-18: Merge Mode bits */
|
||
#define CP0_CONFIG_MM_MASK (3 << CP0_CONFIG_MM_SHIFT)
|
||
# define CP0_CONFIG_MM_PROHIBITED (0 << CP0_CONFIG_MM_SHIFT) /* Merging is not allowed */
|
||
# define CP0_CONFIG_MM_ALLOWED (2 << CP0_CONFIG_MM_SHIFT) /* Merging is allowed */
|
||
#define CP0_CONFIG_MDU (1 << 20) /* Multipley/Divide unit bit */
|
||
#define CP0_CONFIG_SB (1 << 21) /* Bit 32: Simple BE bus mode bit */
|
||
#define CP0_CONFIG_UDI (1 << 22) /* Bit 22: User defined bit */
|
||
#define CPO_CONFIG_DSP (1 << 23) /* Bit 24: Data Scratchpad RAM bit */
|
||
#define CPO_CONFIG_ISP (1 << 24) /* Bit 24: Instruction Scratchpad RAM bit */
|
||
#define CP0_CONFIG_KU_SHIFT (25) /* Bits 25-27: KUSEG and USEG cacheability */
|
||
#define CP0_CONFIG_KU_MASK (7 << CP0_CONFIG_KU_SHIFT)
|
||
# define CP0_CONFIG_KU_UNCACHED (2 << CP0_CONFIG_KU_SHIFT)
|
||
# define CP0_CONFIG_KU_CACHEABLE (3 << CP0_CONFIG_KU_SHIFT)
|
||
#define CP0_CONFIG_K23_SHIFT (28) /* Bits 28-30: KSEG2 and KSEG3 cacheability */
|
||
#define CP0_CONFIG_K23_MASK (7 << CP0_CONFIG_K23_SHIFT)
|
||
# define CP0_CONFIG_K23_UNCACHED (2 << CP0_CONFIG_K23_SHIFT)
|
||
# define CP0_CONFIG_K23_CACHEABLE (3 << CP0_CONFIG_K23_SHIFT)
|
||
|
||
/* Register Number: 16 Sel: 1 Name: Config1
|
||
* Function: Configuration register 1
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Register Number: 16 Sel: 2 Name: Config2
|
||
* Function: Configuration register 2
|
||
* Compliance Level: Optional.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
#undef CP0_CONFIG2_TBS_SHIFT
|
||
#undef CP0_CONFIG2_TBS_MASK
|
||
|
||
/* Register Number: 16 Sel: 3 Name: Config3
|
||
* Function: Configuration register 3
|
||
* Compliance Level: Optional.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
#define CP0_CONFIG3_SP (1 << 4) /* Bit 4: Support page bit */
|
||
#define CP0_CONFIG3_VINT (1 << 5) /* Bit 5: Vector interrupt bit */
|
||
#define CP0_CONFIG3_VEIC (1 << 6) /* Bit 6: External interrupt controller supported */
|
||
|
||
/* Register Number: 16 Sel: 4 Name: Config4
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 16 Sel: 5 Name: Config5
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 16 Sel: 7 Name: Config7
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 17 Sel: 0 Name: LLAddr
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 18 Sel: 0 Name: WatchLo
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 19 Sel: 0 Name: WatchHi
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 20-22 Reserved
|
||
* Compliance Level: Optional.
|
||
*/
|
||
|
||
/* Register Number: 23 Sel: 0 Name: Debug
|
||
* Function: EJTAG Debug register
|
||
* Compliance Level: Optional.
|
||
*/
|
||
|
||
#define CP0_DEBUG_DSS (1 << 0) /* Bit 0: Debug single-step exception */
|
||
#define CP0_DEBUG_DBP (1 << 1) /* Bit 1: Debug software breakpoint exception */
|
||
#define CP0_DEBUG_DDBL (1 << 2) /* Bit 2: Debug data break exception on load */
|
||
#define CP0_DEBUG_DDBS (1 << 3) /* Bit 3: Debug data break exception on store */
|
||
#define CP0_DEBUG_DIB (1 << 4) /* Bit 4: Debug instruction break exception */
|
||
#define CP0_DEBUG_DINT (1 << 5) /* Bit 5: Debug interrupt exception */
|
||
#define CP0_DEBUG_SST (1 << 8) /* Bit 6: Enable debug single step exception */
|
||
#define CP0_DEBUG_NOSST (1 << 9) /* Bit 7: No single step feature available */
|
||
#define CP0_DEBUG_DEXCCODE_SHIFT (10) /* Bits 10-14: Cause of latest exception in DEBUG mode */
|
||
#define CP0_DEBUG_DEXCCODE_MASK (31 << CP0_DEBUG_DEXCCODE_SHIFT)
|
||
#define CP0_DEBUG_VER_SHIFT (15) /* Bits 15-17: EJTAG version */
|
||
#define CP0_DEBUG_VER_MASK (7 << CP0_DEBUG_VER_SHIFT)
|
||
#define CP0_DEBUG_DDBLIMPR (1 << 18) /* Bit 18: Imprecise debug data break load instruction */
|
||
#define CP0_DEBUG_DDBSIMPR (1 << 19) /* Bit 19: Imprecise debug data break store instruction */
|
||
#define CP0_DEBUG_IEXI (1 << 20) /* Bit 20: Imprecise error exception inhibit */
|
||
#define CP0_DEBUG_DBUSEP (1 << 21) /* Bit 21: Data access bus error exception pending */
|
||
#define CP0_DEBUG_CACHEEP (1 << 22) /* Bit 22: Imprecise cache error exception is pending */
|
||
#define CP0_DEBUG_MCHECKP (1 << 23) /* Bit 23: Imprecise machine check exception is pending */
|
||
#define CP0_DEBUG_IBUSEP (1 << 24) /* Bit 24: Bus error exception pending */
|
||
#define CP0_DEBUG_COUNTDM (1 << 25) /* Bit 25: Count register behavior (1=running) */
|
||
#define CP0_DEBUG_HALT (1 << 26) /* Bit 26: Internal system bus clock stopped */
|
||
#define CP0_DEBUG_DOZE (1 << 27) /* Bit 27: Processor in low power mode */
|
||
#define CP0_DEBUG_LSNM (1 << 28) /* Bit 28: Load/store in DSEG goes to main memory */
|
||
#define CP0_DEBUG_NODCR (1 << 29) /* Bit 29: No DSEG preset */
|
||
#define CP0_DEBUG_DM (1 << 30) /* Bit 30: Processor is operating in DEBUG mode */
|
||
#define CP0_DEBUG_DBD (1 << 31) /* Bit 31: Last debug exception occurred in a dely slot */
|
||
|
||
/* Register Number: 23 Sel: 1 Name: TraceControl
|
||
* Function: EJTAG Debug register
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 23 Sel: 2 Name: TraceControl2
|
||
* Function: EJTAG Debug register
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 23 Sel: 3 Name: UserTraceData1
|
||
* Function: EJTAG Debug register
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 23 Sel: 4 Name: TraceBPC
|
||
* Function: EJTAG Debug register
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 23 Sel: 5 Name: Debug2
|
||
* Function: EJTAG Debug register
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 24 Sel: 0 Name: DEPC
|
||
* Function: Program counter at last EJTAG debug exception
|
||
* Compliance Level: Optional.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
/* Register Number: 24 Sel: 3 Name: UserTraceData2
|
||
* Function: EJTAG user trace data 2 register
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 25 Sel: 0 Name: PerfCtl0
|
||
* Function: Performance counter 0 control
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 25 Sel: 1 Name: PerfCnt0
|
||
* Function: Performance counter 0
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 25 Sel: 2 Name: PerfCtl1
|
||
* Function: Performance counter 1 control
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 25 Sel: 3 Name: PerfCnt1
|
||
* Function: Performance counter 1
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 26 Sel: 0 Name: ErrCtl
|
||
* Function: Software test enable of way-select and data RAM arrays for
|
||
* I-Cache and D-Cache
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 27 Reserved
|
||
* Compliance Level: Recommended/Optional.
|
||
*/
|
||
|
||
/* Register Number: 28 Sel: 0 Name: TagLo
|
||
* Function: Low-order portion of cache tag interface
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 28 Sel: 1 Name: DataLo
|
||
* Function: Low-order portion of cache tag interface
|
||
* Compliance Level: Optional.
|
||
* To be provided
|
||
*/
|
||
|
||
/* Register Number: 29 Reserved
|
||
* Compliance Level: Recommended/Optional.
|
||
*/
|
||
|
||
/* Register Number: 30 Sel: 0 Name: ErrorEPC
|
||
* Function: Program counter at last error
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Register Number: 31 Sel: 0 Name: DeSAVE
|
||
* Function: EJTAG debug exception save register
|
||
* Compliance Level: Optional.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
/****************************************************************************
|
||
* Public Types
|
||
****************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
/****************************************************************************
|
||
* Inline Functions
|
||
****************************************************************************/
|
||
|
||
/****************************************************************************
|
||
* Public Function Prototypes
|
||
****************************************************************************/
|
||
|
||
#ifdef __cplusplus
|
||
#define EXTERN extern "C"
|
||
extern "C"
|
||
{
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
#undef EXTERN
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|
||
|
||
#endif /* __ASSEMBLY__ */
|
||
#endif /* __ARCH_MIPS_INCLUDE_PIC32MZ_CP0_H */
|