f362d161db
arm: codestyle fixes 1
* arm: a1x: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: am335x: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: c5471: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: cxd56xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: dm320: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: efm32: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: imx6: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: imxrt: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: kinetis: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
309 lines
12 KiB
C
309 lines
12 KiB
C
/****************************************************************************
|
||
* boards/arm/kinetis/teensy-3.x/include/board.h
|
||
* include/arch/board/board.h
|
||
*
|
||
* Copyright (C) 2015-2017 Gregory Nutt. All rights reserved.
|
||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
****************************************************************************/
|
||
|
||
#ifndef __BOARDS_ARM_KINETIS_TEENSY_3X_INCLUDE_BOARD_H
|
||
#define __BOARDS_ARM_KINETIS_TEENSY_3X_INCLUDE_BOARD_H
|
||
|
||
/****************************************************************************
|
||
* Included Files
|
||
****************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
|
||
#ifndef __ASSEMBLY__
|
||
# include <stdint.h>
|
||
# include <stdbool.h>
|
||
#endif
|
||
|
||
/****************************************************************************
|
||
* Pre-processor Definitions
|
||
****************************************************************************/
|
||
|
||
/* Clocking *****************************************************************/
|
||
|
||
/* The teensy-3.1 has a 16MHz crystal on board */
|
||
|
||
#undef BOARD_EXTCLOCK /* Crystal */
|
||
#define BOARD_EXTAL_LP /* Low Power, as opposed to Hi Gain */
|
||
|
||
/* BOARD_FRDIV is MCG_C1_FRDIV_DIV512 from kinetis_mcg.h.
|
||
* According to the k20 reference manual, when transitioning MCG clock modes
|
||
* to FLL Bypassed External the C1 divider must be set so that the FLL clock
|
||
* is between 31.25 and 39.0625 khz.
|
||
* For teensy-3.x that works out to a divider of 512.
|
||
*/
|
||
|
||
#define BOARD_FRDIV MCG_C1_FRDIV_DIV512
|
||
|
||
#define BOARD_EXTAL_FREQ 16000000 /* 16MHz crystal frequency (REFCLK) */
|
||
#define BOARD_XTAL32_FREQ 32768 /* 32KHz RTC Oscillator (not populated) */
|
||
|
||
/* PLL Configuration.
|
||
* NOTE: Only even frequency crystals are supported that will produce a 2MHz
|
||
* reference clock to the PLL.
|
||
* The rated speed for the MK20DX256VLH7 is 72MHz and 50MHz for the
|
||
* MK20DX128VLH5, but according to the PJRC website, both can be overclocked
|
||
* at 96MHz
|
||
*
|
||
* MK20DX128VLH5 Rated Frequency 50MHz (selecting 48Mhz to use USB)
|
||
*
|
||
* PLL Input frequency: PLLIN = REFCLK/PRDIV = 16MHz/8 = 2MHz
|
||
* PLL Output frequency: PLLOUT = PLLIN*VDIV = 2Mhz*24 = 48MHz
|
||
* MCG Frequency: PLLOUT = 48MHz
|
||
*
|
||
* MK20DX256VLH7 Rated Frequency 72MHz
|
||
*
|
||
* PLL Input frequency: PLLIN = REFCLK/PRDIV = 16MHz/8 = 2MHz
|
||
* PLL Output frequency: PLLOUT = PLLIN*VDIV = 2Mhz*36 = 72MHz
|
||
* MCG Frequency: PLLOUT = 72MHz
|
||
*
|
||
* Board can be overclocked at 96MHz (per PJRC.com)
|
||
* PLL Input frequency: PLLIN = REFCLK/PRDIV = 16MHz/8 = 2MHz
|
||
* PLL Output frequency: PLLOUT = PLLIN*VDIV = Mhz*48 = 96MHz
|
||
* MCG Frequency: PLLOUT = 96MHz
|
||
*/
|
||
|
||
#if defined(CONFIG_TEENSY_3X_OVERCLOCK)
|
||
/* PLL Configuration */
|
||
|
||
# define BOARD_PRDIV 8 /* PLL External Reference Divider */
|
||
# define BOARD_VDIV 48 /* PLL VCO Divider (frequency multiplier) */
|
||
|
||
/* SIM CLKDIV1 dividers */
|
||
|
||
# define BOARD_OUTDIV1 1 /* Core = MCG, 96MHz */
|
||
# define BOARD_OUTDIV2 2 /* Bus = MCG/2, 48MHz */
|
||
# define BOARD_OUTDIV3 0 /* N/A = No OUTDIV3 */
|
||
# define BOARD_OUTDIV4 4 /* Flash clock = MCG/4, 24MHz */
|
||
|
||
#elif defined(CONFIG_ARCH_CHIP_MK20DX256VLH7)
|
||
|
||
/* PLL Configuration */
|
||
|
||
# define BOARD_PRDIV 8 /* PLL External Reference Divider */
|
||
# define BOARD_VDIV 36 /* PLL VCO Divider (frequency multiplier) */
|
||
|
||
/* SIM CLKDIV1 dividers */
|
||
|
||
# define BOARD_OUTDIV1 1 /* Core = MCG, 72MHz */
|
||
# define BOARD_OUTDIV2 2 /* Bus = MCG/2, 36MHz */
|
||
# define BOARD_OUTDIV3 0 /* N/A = No OUTDIV3 */
|
||
# define BOARD_OUTDIV4 3 /* Flash clock = MCG/3, 72MHz */
|
||
|
||
#elif defined(CONFIG_ARCH_CHIP_MK20DX128VLH5)
|
||
/* PLL Configuration */
|
||
|
||
# define BOARD_PRDIV 8 /* PLL External Reference Divider */
|
||
# define BOARD_VDIV 24 /* PLL VCO Divider (frequency multiplier) */
|
||
|
||
/* SIM CLKDIV1 dividers */
|
||
|
||
# define BOARD_OUTDIV1 1 /* Core = MCG, 48MHz */
|
||
# define BOARD_OUTDIV2 1 /* Bus = MCG/1, 48MHz */
|
||
# define BOARD_OUTDIV3 0 /* N/A = No OUTDIV3 */
|
||
# define BOARD_OUTDIV4 2 /* Flash clock = MCG/2, 24MHz */
|
||
#endif
|
||
|
||
#define BOARD_PLLIN_FREQ (BOARD_EXTAL_FREQ / BOARD_PRDIV)
|
||
#define BOARD_PLLOUT_FREQ (BOARD_PLLIN_FREQ * BOARD_VDIV)
|
||
#define BOARD_MCG_FREQ BOARD_PLLOUT_FREQ
|
||
|
||
#define BOARD_CORECLK_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV1)
|
||
#define BOARD_BUS_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV2)
|
||
#define BOARD_FLEXBUS_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV3)
|
||
#define BOARD_FLASHCLK_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV4)
|
||
|
||
/* Use MCGPLLCLK as the output SIM_SOPT2 MUX selected by
|
||
* SIM_SOPT2[PLLFLLSEL]
|
||
*/
|
||
|
||
#define BOARD_SOPT2_PLLFLLSEL SIM_SOPT2_PLLFLLSEL_MCGPLLCLK
|
||
#define BOARD_SOPT2_FREQ BOARD_MCG_FREQ
|
||
|
||
/* Divider output clock = Divider input clock × [ (USBFRAC+1) / (USBDIV+1) ]
|
||
* SIM_CLKDIV2_FREQ = BOARD_SOPT2_FREQ × [ (USBFRAC+1) / (USBDIV+1) ]
|
||
*/
|
||
|
||
#if BOARD_SOPT2_FREQ == 96000000
|
||
/* USBFRAC/USBDIV = 1/2 of 96Mhz clock = 48MHz */
|
||
|
||
# define BOARD_SIM_CLKDIV2_USBFRAC 1
|
||
# define BOARD_SIM_CLKDIV2_USBDIV 2
|
||
#elif BOARD_SOPT2_FREQ == 72000000
|
||
/* USBFRAC/USBDIV = 2/3 of 72Mhz clock = 48MHz */
|
||
|
||
# define BOARD_SIM_CLKDIV2_USBFRAC 2
|
||
# define BOARD_SIM_CLKDIV2_USBDIV 3
|
||
#elif BOARD_SOPT2_FREQ == 48000000
|
||
/* USBFRAC/USBDIV = 1/1 of 48Mhz clock = 48MHz */
|
||
|
||
# define BOARD_SIM_CLKDIV2_USBFRAC 1
|
||
# define BOARD_SIM_CLKDIV2_USBDIV 1
|
||
#endif
|
||
|
||
#define BOARD_SIM_CLKDIV2_FREQ (BOARD_SOPT2_FREQ / \
|
||
BOARD_SIM_CLKDIV2_USBDIV * \
|
||
BOARD_SIM_CLKDIV2_USBFRAC)
|
||
|
||
/* Use the output of SIM_SOPT2[PLLFLLSEL] as the USB clock source */
|
||
|
||
#define BOARD_USB_CLKSRC SIM_SOPT2_USBSRC
|
||
#define BOARD_USB_FREQ BOARD_SIM_CLKDIV2_FREQ
|
||
|
||
/* Allow USBOTG-FS Controller to Read from FLASH */
|
||
|
||
#define BOARD_USB_FLASHACCESS
|
||
|
||
/* PWM Configuration */
|
||
|
||
/* FTM0 Channels */
|
||
|
||
#define GPIO_FTM0_CH0OUT PIN_FTM0_CH0_2 /* Pin 22: PTC1 */
|
||
#define GPIO_FTM0_CH1OUT PIN_FTM0_CH1_2 /* Pin 23: PTC2 */
|
||
#define GPIO_FTM0_CH2OUT PIN_FTM0_CH2_2 /* Pin 9: PTC3 */
|
||
#define GPIO_FTM0_CH3OUT PIN_FTM0_CH3 /* Pin 10: PTC4 */
|
||
#define GPIO_FTM0_CH4OUT PIN_FTM0_CH4 /* Pin 6: PTD4 */
|
||
#define GPIO_FTM0_CH5OUT PIN_FTM0_CH5_2 /* Pin 20: PTD5 */
|
||
#define GPIO_FTM0_CH6OUT PIN_FTM0_CH6_2 /* Pin 21: PTD6 */
|
||
#define GPIO_FTM0_CH7OUT PIN_FTM0_CH7_2 /* Pin 5: PTD7 */
|
||
|
||
/* FTM1 Channels */
|
||
|
||
#define GPIO_FTM1_CH0OUT PIN_FTM1_CH0_1 /* Pin 3: PTA12 */
|
||
#define GPIO_FTM1_CH1OUT PIN_FTM1_CH1_1 /* Pin 4: PTA13 */
|
||
|
||
/* FTM2 Channels */
|
||
|
||
#define GPIO_FTM2_CH0OUT PIN_FTM2_CH0 /* Pin 25: PTB18 */
|
||
#define GPIO_FTM2_CH1OUT PIN_FTM2_CH1 /* Pin 32: PTB19 */
|
||
|
||
/* LED definitions **********************************************************/
|
||
|
||
/* A single LED is available driven by PTC5.
|
||
* The LED is grounded so bringing PTC5 high will illuminate the LED.
|
||
*/
|
||
|
||
/* LED index values for use with board_userled() */
|
||
|
||
#define BOARD_LED 0
|
||
#define BOARD_NLEDS 1
|
||
|
||
/* LED bits for use with board_userled_all() */
|
||
|
||
#define BOARD_LED_BIT (1 << BOARD_LED)
|
||
|
||
/* When CONFIG_ARCH_LEDS is defined in the NuttX configuration, NuttX will
|
||
* control the LED as defined below.
|
||
* Thus if the LED is statically on, NuttX has successfully booted and is,
|
||
* apparently, running normally.
|
||
* If the LED is flashing at approximately 2Hz, then a fatal error has been
|
||
* detected and the system has halted.
|
||
*/
|
||
|
||
#define LED_STARTED 0 /* STATUS LED=OFF */
|
||
#define LED_HEAPALLOCATE 0 /* STATUS LED=OFF */
|
||
#define LED_IRQSENABLED 0 /* STATUS LED=OFF */
|
||
#define LED_STACKCREATED 1 /* STATUS LED=ON */
|
||
#define LED_INIRQ 2 /* STATUS LED=no change */
|
||
#define LED_SIGNAL 2 /* STATUS LED=no change */
|
||
#define LED_ASSERTION 3 /* STATUS LED=no change */
|
||
#define LED_PANIC 3 /* STATUS LED=flashing */
|
||
|
||
/* Button definitions *******************************************************/
|
||
|
||
/* The teensy-3.1 board has no standard GPIO contact buttons */
|
||
|
||
/* Alternative pin resolution ***********************************************/
|
||
|
||
/* The K20 has three UARTs with pin availability as follows:
|
||
*
|
||
* --------- ------ ----------- -------------------------
|
||
* UART PORT BOARD PJRC PINOUT DESCRIPTION
|
||
* FUNCTION LABEL
|
||
* --------- ------ ----------- -------------------------
|
||
* UART0_RX PTA1 (See above) MINI54TAN / Bootloader
|
||
* PTB16 Pin 0 RX1 / Touch
|
||
* PTD6 Pin 21 / A7 RX1 / CS / PWM
|
||
* UART0_TX PTA2 (See above) MINI54TAN / Bootloader
|
||
* PTB17 Pin 1 TX1 / Touch
|
||
* PTD7 Pin 5 TX1 / PWM
|
||
* --------- ------ ----------- -------------------------
|
||
* UART1_RX PTC3 Pin 9 RX2 / CS / PWM
|
||
* PTE1 Pad 26 (Pad on back of board)
|
||
* UART1_TX PTC4 Pin 10 TX2 / CS / PWM
|
||
* PTE0 Pad 31 (Pad on back of board)
|
||
* --------- ------ ----------- -------------------------
|
||
* UART2_RX PTD2 Pin 7 RX3 / DOUT
|
||
* UART2_TX PTD3 Pin 8 TX3 / DIN
|
||
* --------- ------ ----------- -------------------------
|
||
*
|
||
* The default serial console is UART0 on pins 0 (RX) and 1 (TX).
|
||
*/
|
||
|
||
#ifdef CONFIG_KINETIS_UART0
|
||
# define PIN_UART0_RX PIN_UART0_RX_2
|
||
# define PIN_UART0_TX PIN_UART0_TX_2
|
||
#endif
|
||
|
||
#ifdef CONFIG_KINETIS_UART1
|
||
# define PIN_UART0_RX PIN_UART1_RX_1
|
||
# define PIN_UART0_TX PIN_UART1_TX_1
|
||
#endif
|
||
|
||
#ifdef CONFIG_KINETIS_I2C0
|
||
#ifdef CONFIG_TEENSY_3X_I2C_ALT_PINS
|
||
# define PIN_I2C0_SCL (PIN_I2C0_SCL_1 | PIN_ALT2_OPENDRAIN | PIN_ALT2_SLOW)
|
||
# define PIN_I2C0_SDA (PIN_I2C0_SDA_1 | PIN_ALT2_OPENDRAIN | PIN_ALT2_SLOW)
|
||
#else
|
||
# define PIN_I2C0_SCL (PIN_I2C0_SCL_2 | PIN_ALT2_OPENDRAIN | PIN_ALT2_SLOW)
|
||
# define PIN_I2C0_SDA (PIN_I2C0_SDA_2 | PIN_ALT2_OPENDRAIN | PIN_ALT2_SLOW)
|
||
#endif
|
||
#endif
|
||
|
||
/* REVISIT: Added only for clean compilation with I2C1 enabled. */
|
||
|
||
#ifdef CONFIG_KINETIS_I2C1
|
||
#ifdef CONFIG_TEENSY_3X_I2C_ALT_PINS
|
||
# define PIN_I2C1_SCL (PIN_I2C1_SCL_1 | PIN_ALT2_OPENDRAIN | PIN_ALT2_SLOW)
|
||
# define PIN_I2C1_SDA (PIN_I2C1_SDA_1 | PIN_ALT2_OPENDRAIN | PIN_ALT2_SLOW)
|
||
#else
|
||
# define PIN_I2C1_SCL (PIN_I2C1_SCL_2 | PIN_ALT2_OPENDRAIN | PIN_ALT2_SLOW)
|
||
# define PIN_I2C1_SDA (PIN_I2C1_SDA_2 | PIN_ALT2_OPENDRAIN | PIN_ALT2_SLOW)
|
||
#endif
|
||
#endif
|
||
|
||
#endif /* __BOARDS_ARM_KINETIS_TEENSY_3X_INCLUDE_BOARD_H */
|