nuttx/boards/hc/mcs92s12ne64/ne64badge/include/board.h
Alin Jerpelea 66565a69a7 Merged in alinjerpelea/nuttx (pull request #969)
avr: hc: mips: codestyle fixes

* avr: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-08 14:53:04 +00:00

106 lines
4.4 KiB
C

/****************************************************************************
* boards/hc/mcs92s12ne64/ne64badge/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __BOARDS_HC_MCS92S12NE64_NE64BADGE_INCLUDE_BOARD_H
#define __BOARDS_HC_MCS92S12NE64_NE64BADGE_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* Frequency of the crystal oscillator */
#define HCS12_OSCCLK 16000000 /* 16MHz */
/* PLL Settings
*
* SYNR register controls the multiplication factor of the PLL.
* If the PLL is on, the count in the loop divider (SYNR) register
* effectively multiplies up the PLL clock (PLLCLK) from the reference
* frequency by 2 x (SYNR+1). PLLCLK will not be below
* the minimum VCO frequency (fSCM).
*
* The REFDV register provides a finer granularity for the PLL multiplier
* steps.
* The count in the reference divider divides OSCCLK frequency by REFDV + 1.
*
* PLLCLK = 2 * OSCCLK * (SYNR + 1) / (REFDV + 1)
*
* If (PLLSEL = 1), Bus Clock = PLLCLK / 2
*/
#define HCS12_SYNR_VALUE 0x15
#define HCS12_REFDV_VALUE 0x15
#define HCS12_PLLCLK (2*HCS12_OSCCLK*(HCS12_SYNR+1)/(HCS12_REFDV+1))
#define HCS12_BUSCLK (HSC12_PLLCLK/2)
/* LED definitions **********************************************************/
/* The NE64 Badge board has 2 red LEDs that we will encode as: */
/* LED1 LED2 */
#define LED_STARTED 0 /* OFF OFF = Still initializing */
#define LED_HEAPALLOCATE 0 /* OFF OFF = Still initializing */
#define LED_IRQSENABLED 0 /* OFF OFF = Still initializing */
#define LED_STACKCREATED 1 /* ON OFF = Initialization complete */
#define LED_INIRQ 2 /* NC ON = In an interrupt handler */
#define LED_SIGNAL 2 /* NC ON = In a signal handler */
#define LED_ASSERTION 2 /* NC ON = In an assertion */
#define LED_PANIC 2 /* NC ON = Oops! We crashed. (flashing) */
/* Button definitions *******************************************************/
/* The NE64 badge has 2 switches,
* one labed SW1 and the other SW2 on the board (but
* referred to as button1 and button2 in some documentation)
*/
#define BUTTON1 1 /* Bit 0: SW1 button is depressed */
#define BUTTON2 2 /* Bit 1: SW2 button is depressed */
#endif /* __BOARDS_HC_MCS92S12NE64_NE64BADGE_INCLUDE_BOARD_H */