David Sidrane f822107efb drivers/serial/Kconfig: Split serial Rx/Tx DMA.		2019-12-03 07:06:30 -06:00
..
Kconfig	drivers/serial/Kconfig: Split serial Rx/Tx DMA.	2019-12-03 07:06:30 -06:00
Kconfig-16550	Squashed commit of the following:	2018-08-26 11:37:16 -06:00
Kconfig-lpuart	drivers/serial/Kconfig: Split serial Rx/Tx DMA.	2019-12-03 07:06:30 -06:00
Kconfig-sci	We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces	2019-10-11 23:36:57 +08:00
Kconfig-uart	drivers/serial/Kconfig: Split serial Rx/Tx DMA.	2019-12-03 07:06:30 -06:00
Kconfig-usart	drivers/serial/Kconfig: Split serial Rx/Tx DMA.	2019-12-03 07:06:30 -06:00
lowconsole.c	Squashed commit of the following:	2019-05-21 18:57:54 -06:00
Make.defs	This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.	2019-11-02 11:30:33 -06:00
ptmx.c	Squashed commit of the following:	2019-05-21 18:57:54 -06:00
pty.c	Squashed commit of the following:	2019-05-21 18:57:54 -06:00
pty.h	PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt()	2016-07-15 09:39:33 -06:00
serial_dma.c	drivers/serial/serial_dma.c: Still need reset xmit buffer when meet TCOFLUSH. This is an amendment to 8fb19a4359.	2019-11-07 06:40:21 -06:00
serial_io.c	drivers/serial/serial_io.c and serial_dma.c: Fix some long lines.	2019-11-06 07:10:24 -06:00
serial.c	drivers/serial/serial.c: Only real uart will call pm_activity().	2019-11-03 19:56:28 -06:00
tcdrain.c	Make sure that labeling is used consistently in all function headers (part 2).	2018-02-01 12:03:55 -06:00
uart_16550.c	drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.	2019-04-24 12:11:40 -06:00
uart_rpmsg.c	This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.	2019-11-02 11:30:33 -06:00