nuttx

chip

Add GPIO_I2C2_SDA_4 to STM32F411

2016-06-15 09:06:08 -07:00

gnu

STM32: Add support for the IAR compiler

2016-04-02 06:58:55 -06:00

iar

STM32: Add support for the IAR compiler

2016-04-02 06:58:55 -06:00

chip.h

Add stm32f105r support

2016-06-06 12:52:41 -07:00

Kconfig

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

Make.defs

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

stm32_1wire.c

1-wire: Initialization/uninitialization functions are not use MCU-independent up_ naming. Should use STM32-specific stm32_ naming. These are not globally accessible but only accessible from STM32 board logic.

2016-05-25 17:56:47 -06:00

stm32_1wire.h

Costmetic changes from review of last PR

2016-05-25 18:04:39 -06:00

stm32_adc.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_adc.h

STM32 ADC: Add DMA support for STM32F30xxx

2015-12-22 03:42:37 -05:00

stm32_aes.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_aes.h

STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>

2015-02-04 06:49:05 -06:00

stm32_alarm.h

STM32 F4: Add a custom RTC driver

2016-04-02 10:46:10 -06:00

stm32_allocateheap.c

Rename CONFIG_DEBUG_HEAP to CONFIG_HEAP_COLORATION

2016-06-15 14:48:06 -06:00

stm32_bbsram.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_bbsram.h

Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.

2015-02-21 15:15:51 -06:00

stm32_bkp.h

ST3210E-EVAL: Add power management configuration; move all linker scripts to common files

2012-06-28 00:48:00 +00:00

stm32_can.c

Centralize definitions associated with CONFIG_DEBUG_CAN

2016-06-15 15:45:27 -06:00

stm32_can.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_capture.c

Correct conditional compilation in STM32 timer cpature logic

2016-06-03 08:41:53 -06:00

stm32_capture.h

A few more cosmetic changes

2015-12-24 07:38:17 -06:00

stm32_ccm.c

Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.

2015-02-21 15:15:51 -06:00

stm32_ccm.h

Clean up some naming

2015-12-01 15:04:12 -06:00

stm32_dac.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_dac.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_dbgmcu.h

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

stm32_dma2d.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_dma2d.h

Standardize the width of all comment boxes in C header files

2015-10-03 07:28:30 -06:00

stm32_dma.c

Fix STM32 DMA code and configuration for STM32F37X chips

2016-06-09 05:02:43 +02:00

stm32_dma.h

Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled

2016-06-12 14:44:04 -06:00

stm32_dumpgpio.c

New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting.

2016-06-14 09:07:53 -06:00

stm32_eth.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_eth.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_exti_alarm.c

Fix some spacing problems

2015-10-04 14:59:08 -06:00

stm32_exti_gpio.c

Fix some spacing problems

2015-10-04 14:59:08 -06:00

stm32_exti_pwr.c

Fix some spacing problems

2015-10-04 14:59:08 -06:00

stm32_exti_pwr.h

STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.

2015-04-28 06:37:59 -06:00

stm32_exti.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_flash.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32_flash.h

More STM3240 header file changes

2011-11-21 14:25:38 +00:00

stm32_fsmc.h

Fix typo

2015-09-10 21:07:03 -04:00

stm32_getc.c

Update some comments

2016-06-04 13:04:13 -06:00

stm32_getc.h

KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc

2016-06-04 11:29:27 -06:00

stm32_gpio.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_gpio.h

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

stm32_i2c_alt.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_i2c.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_i2c.h

Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming

2016-02-02 12:08:23 -06:00

stm32_idle.c

Replace all occurrences of vdbg with vinfo

2016-06-11 11:59:51 -06:00

stm32_irq.c

Centralize definitions associated with CONFIG_DEBUG_IRQ

2016-06-15 08:35:22 -06:00

stm32_iwdg.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_lowputc.c

STM32: Hook 1-Wire driver into the build system

2016-05-25 12:31:32 -06:00

stm32_lowputc.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_lse.c

Fix an error introduced into stm32_pwr_enablebkp(). That function must preserve the previous state of backup domain access on return.

2015-04-18 07:31:20 -06:00

stm32_lsi.c

The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.

2015-03-29 15:34:48 -06:00

stm32_ltdc.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_ltdc.h

Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).

2015-04-16 09:11:52 -06:00

stm32_mpuinit.c

Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU

2015-12-14 13:56:21 -06:00

stm32_mpuinit.h

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

stm32_otgfs.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_otgfsdev.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_otgfshost.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_otghs.h

Standardize the width of all comment boxes in C header files

2015-10-03 07:28:30 -06:00

stm32_otghsdev.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_otghshost.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_pm.h

Cosmetic: Move # of pre-processior command to column 1

2015-09-05 09:07:37 -06:00

stm32_pminitialize.c

LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks

2013-12-05 10:37:55 -06:00

stm32_pmsleep.c

More trailing whilespace removal

2014-04-13 16:22:22 -06:00

stm32_pmstandby.c

More trailing whilespace removal

2014-04-13 16:22:22 -06:00

stm32_pmstop.c

More trailing whilespace removal

2014-04-13 16:22:22 -06:00

stm32_procfs_ccm.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

stm32_pwm.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_pwm.h

STM32 PWM: Add support for multiple output channels

2015-11-01 17:11:35 -05:00

stm32_pwr.c

Correct description of some input parameters. Suggested by Pelle Windestam

2015-05-05 06:26:59 -06:00

stm32_pwr.h

Correct description of some input parameters. Suggested by Pelle Windestam

2015-05-05 06:26:59 -06:00

stm32_qencoder.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_qencoder.h

Ooops part of last checkin was still in the editor

2012-02-25 00:58:07 +00:00

stm32_rcc.c

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_rcc.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_rng.c

Replace all occurrences of vdbg with vinfo

2016-06-11 11:59:51 -06:00

stm32_rtc_lowerhalf.c

alarm 10 now runs to completion

2016-05-31 14:17:52 -07:00

stm32_rtc.c

STM32 F4: Add a custom RTC driver

2016-04-02 10:46:10 -06:00

stm32_rtc.h

STM32 F4: Add a custom RTC driver

2016-04-02 10:46:10 -06:00

stm32_rtcc.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_rtcounter.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_sdio.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_sdio.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_serial.c

STM32: Hook 1-Wire driver into the build system

2016-05-25 12:31:32 -06:00

stm32_spi.c

Centralize definitions associated with CONFIG_DEBUG_SPI

2016-06-15 10:41:13 -06:00

stm32_spi.h

For STM32, rename up_spiinitialize to stm32_spibus_initialize

2016-01-26 12:22:27 -06:00

stm32_start.c

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

stm32_syscfg.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_tim_lowerhalf.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_tim.c

Use DEBUG assertions to save space

2016-06-03 14:49:05 -06:00

stm32_tim.h

Revert "add timer capture STM32"

2015-12-22 13:27:42 +01:00

stm32_timerisr.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32_uart.h

STM32: Hook 1-Wire driver into the build system

2016-05-25 12:31:32 -06:00

stm32_uid.c

STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address

2015-11-18 14:33:27 -06:00

stm32_uid.h

Changes to last merge from review for compliance to coding standards

2015-11-17 21:10:17 -06:00

stm32_usbdev.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_usbdev.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_usbhost.c

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

stm32_usbhost.h

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

stm32_userspace.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32_userspace.h

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

stm32_waste.c

Add Uros' RCC actitivity counter to STM32 idle loop

2011-08-20 13:23:34 +00:00

stm32_waste.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_wdg.h

Clean up and review of header files for conformance to standards

2015-06-12 19:00:52 -06:00

stm32_wwdg.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32.h

Centralize definitions associated with CONFIG_DEBUG_CAN

2016-06-15 15:45:27 -06:00

stm32f10xxx_dma.c

Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled

2016-06-12 14:44:04 -06:00

stm32f10xxx_rcc.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32f20xxx_dma.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32f20xxx_rcc.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32f30xxx_i2c.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32f30xxx_rcc.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32f37xxx_rcc.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00

stm32f40xxx_alarm.h

RTC lower half was missing call to F4 alarm cancel function

2016-04-04 08:23:09 -06:00

stm32f40xxx_dma.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32f40xxx_rcc.c

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32f40xxx_rtcc.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32l15xxx_rcc.c

STM32: Correct some spacing issues

2015-10-07 13:45:15 -06:00