nuttx/net/pkt/pkt.h
chao.an 63173dadbb net/pkt: replace the common connect prologue
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-10 15:04:33 -03:00

294 lines
9.7 KiB
C

/****************************************************************************
* net/pkt/pkt.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __NET_PKT_PKT_H
#define __NET_PKT_PKT_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <queue.h>
#include <nuttx/net/net.h>
#ifdef CONFIG_NET_PKT
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Allocate a new packet socket data callback */
#define pkt_callback_alloc(dev,conn) \
devif_callback_alloc(dev, &conn->sconn.list, &conn->sconn.list_tail)
#define pkt_callback_free(dev,conn,cb) \
devif_conn_callback_free(dev, cb, &conn->sconn.list, &conn->sconn.list_tail)
/****************************************************************************
* Public Type Definitions
****************************************************************************/
/* Representation of a packet socket connection */
struct devif_callback_s; /* Forward reference */
struct pkt_conn_s
{
/* Common prologue of all connection structures. */
struct socket_conn_s sconn;
/* Pkt socket-specific content follows */
uint8_t lmac[6]; /* The local Ethernet address in network byte order */
uint8_t ifindex;
uint16_t proto;
uint8_t crefs; /* Reference counts on this instance */
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
# define EXTERN extern "C"
extern "C"
{
#else
# define EXTERN extern
#endif
/* The packet socket interface */
EXTERN const struct sock_intf_s g_pkt_sockif;
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
struct net_driver_s; /* Forward reference */
struct eth_hdr_s; /* Forward reference */
struct socket; /* Forward reference */
/****************************************************************************
* Name: pkt_initialize()
*
* Description:
* Initialize the packet socket connection structures. Called once and
* only from the network initialization logic.
*
****************************************************************************/
void pkt_initialize(void);
/****************************************************************************
* Name: pkt_alloc()
*
* Description:
* Allocate a new, uninitialized packet socket connection structure. This
* is normally something done by the implementation of the socket() API
*
****************************************************************************/
FAR struct pkt_conn_s *pkt_alloc(void);
/****************************************************************************
* Name: pkt_free()
*
* Description:
* Free a packet socket connection structure that is no longer in use.
* This should be done by the implementation of close().
*
****************************************************************************/
void pkt_free(FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: pkt_active()
*
* Description:
* Find a connection structure that is the appropriate
* connection to be used with the provided Ethernet header
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
FAR struct pkt_conn_s *pkt_active(FAR struct eth_hdr_s *buf);
/****************************************************************************
* Name: pkt_nextconn()
*
* Description:
* Traverse the list of allocated packet connections
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
FAR struct pkt_conn_s *pkt_nextconn(FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: pkt_callback
*
* Description:
* Inform the application holding the packet socket of a change in state.
*
* Returned Value:
* OK if packet has been processed, otherwise ERROR.
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
uint16_t pkt_callback(FAR struct net_driver_s *dev,
FAR struct pkt_conn_s *conn, uint16_t flags);
/****************************************************************************
* Name: pkt_input
*
* Description:
* Handle incoming packet input
*
* This function provides the interface between Ethernet device drivers and
* packet socket logic. All frames that are received should be provided to
* pkt_input() prior to other routing.
*
* Input Parameters:
* dev - The device driver structure containing the received packet
*
* Returned Value:
* OK The packet has been processed and can be deleted
* ERROR There is a matching connection, but could not dispatch the packet
* yet. Useful when a packet arrives before a recv call is in
* place.
*
* Assumptions:
* Called from the network diver with the network locked.
*
****************************************************************************/
/* pkt_input() is prototyped in include/nuttx/net/pkt.h */
/****************************************************************************
* Name: pkt_recvmsg
*
* Description:
* Implements the socket recvmsg interface for the case of the AF_INET
* and AF_INET6 address families. pkt_recvmsg() receives messages from
* a socket, and may be used to receive data on a socket whether or not it
* is connection-oriented.
*
* If 'msg_name' is not NULL, and the underlying protocol provides the
* source address, this source address is filled in. The argument
* 'msg_namelen' is initialized to the size of the buffer associated with
* msg_name, and modified on return to indicate the actual size of the
* address stored there.
*
* Input Parameters:
* psock A pointer to a NuttX-specific, internal socket structure
* msg Buffer to receive the message
* flags Receive flags
*
* Returned Value:
* On success, returns the number of characters received. If no data is
* available to be received and the peer has performed an orderly shutdown,
* recvmsg() will return 0. Otherwise, on errors, a negated errno value is
* returned (see recvmsg() for the list of appropriate error values).
*
****************************************************************************/
ssize_t pkt_recvmsg(FAR struct socket *psock, FAR struct msghdr *msg,
int flags);
/****************************************************************************
* Name: pkt_find_device
*
* Description:
* Select the network driver to use with the PKT transaction.
*
* Input Parameters:
* conn - PKT connection structure (not currently used).
*
* Returned Value:
* A pointer to the network driver to use.
*
****************************************************************************/
FAR struct net_driver_s *pkt_find_device(FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: pkt_poll
*
* Description:
* Poll a packet "connection" structure for availability of TX data
*
* Input Parameters:
* dev - The device driver structure to use in the send operation
* conn - The packet "connection" to poll for TX data
*
* Returned Value:
* None
*
* Assumptions:
* Called from the network device interface (devif) with the network
* locked.
*
****************************************************************************/
void pkt_poll(FAR struct net_driver_s *dev, FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: pkt_sendmsg
*
* Description:
* The pkt_sendmsg() call may be used only when the packet socket is in
* a connected state (so that the intended recipient is known).
*
* Input Parameters:
* psock An instance of the internal socket structure.
* msg Message to send
* flags Send flags
*
* Returned Value:
* On success, returns the number of characters sent. On error, a negated
* errno value is returned (see sendmsg() for the complete list of return
* values.
*
****************************************************************************/
ssize_t pkt_sendmsg(FAR struct socket *psock, FAR struct msghdr *msg,
int flags);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_NET_PKT */
#endif /* __NET_PKT_PKT_H */