233 lines
8.9 KiB
C
233 lines
8.9 KiB
C
/************************************************************************************
|
||
* configs/nucleo-f4x1re/include/nucleo-f401re.h
|
||
*
|
||
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
************************************************************************************/
|
||
|
||
#ifndef __CONFIGS_NUCLEO_F401RE_INCLUDE_NUCLEO_F401RE_H
|
||
#define __CONFIGS_NUCLEO_F401RE_INCLUDE_NUCLEO_F401RE_H
|
||
|
||
/************************************************************************************
|
||
* Included Files
|
||
************************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
#ifndef __ASSEMBLY__
|
||
# include <stdint.h>
|
||
#endif
|
||
|
||
/************************************************************************************
|
||
* Pre-processor Definitions
|
||
************************************************************************************/
|
||
|
||
/* Clocking *************************************************************************/
|
||
/* The NUCLEO401RE supports both HSE and LSE crystals (X2 and X3). However, as
|
||
* shipped, the X2 and X3 crystals are not populated. Therefore the Nucleo-F401RE
|
||
* will need to run off the 16MHz HSI clock.
|
||
*
|
||
* System Clock source : PLL (HSI)
|
||
* SYSCLK(Hz) : 84000000 Determined by PLL configuration
|
||
* HCLK(Hz) : 84000000 (STM32_RCC_CFGR_HPRE)
|
||
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
||
* APB1 Prescaler : 2 (STM32_RCC_CFGR_PPRE1)
|
||
* APB2 Prescaler : 1 (STM32_RCC_CFGR_PPRE2)
|
||
* HSI Frequency(Hz) : 16000000 (nominal)
|
||
* PLLM : 16 (STM32_PLLCFG_PLLM)
|
||
* PLLN : 336 (STM32_PLLCFG_PLLN)
|
||
* PLLP : 4 (STM32_PLLCFG_PLLP)
|
||
* PLLQ : 7 (STM32_PLLCFG_PPQ)
|
||
* Flash Latency(WS) : 5
|
||
* Prefetch Buffer : OFF
|
||
* Instruction cache : ON
|
||
* Data cache : ON
|
||
* Require 48MHz for USB OTG FS, : Enabled
|
||
* SDIO and RNG clock
|
||
*/
|
||
|
||
/* HSI - 16 MHz RC factory-trimmed
|
||
* LSI - 32 KHz RC
|
||
* HSE - not installed
|
||
* LSE - not installed
|
||
*/
|
||
|
||
#define STM32_HSI_FREQUENCY 16000000ul
|
||
#define STM32_LSI_FREQUENCY 32000
|
||
#define STM32_BOARD_USEHSI 1
|
||
|
||
/* Main PLL Configuration.
|
||
*
|
||
* Formulae:
|
||
*
|
||
* VCO input frequency = PLL input clock frequency / PLLM, 2 <= PLLM <= 63
|
||
* VCO output frequency = VCO input frequency × PLLN, 192 <= PLLN <= 432
|
||
* PLL output clock frequency = VCO frequency / PLLP, PLLP = 2, 4, 6, or 8
|
||
* USB OTG FS clock frequency = VCO frequency / PLLQ, 2 <= PLLQ <= 15
|
||
*
|
||
* We would like to have SYSYCLK=84MHz and we must have the USB clock= 48MHz.
|
||
* Some possible solutions include:
|
||
*
|
||
* PLLN=210 PLLM=5 PLLP=8 PLLQ=14 SYSCLK=84000000 OTGFS=48000000
|
||
* PLLN=210 PLLM=10 PLLP=4 PLLQ=7 SYSCLK=84000000 OTGFS=48000000
|
||
* PLLN=336 PLLM=8 PLLP=8 PLLQ=14 SYSCLK=84000000 OTGFS=48000000
|
||
* PLLN=336 PLLM=16 PLLP=4 PLLQ=7 SYSCLK=84000000 OTGFS=48000000
|
||
* PLLN=420 PLLM=10 PLLP=8 PLLQ=14 SYSCLK=84000000 OTGFS=48000000
|
||
* PLLN=420 PLLM=20 PLLP=4 PLLQ=7 SYSCLK=84000000 OTGFS=48000000
|
||
*
|
||
* We will configure like this
|
||
*
|
||
* PLL source is HSI
|
||
* PLL_VCO = (STM32_HSI_FREQUENCY / PLLM) * PLLN
|
||
* = (16,000,000 / 16) * 336
|
||
* = 336,000,000
|
||
* SYSCLK = PLL_VCO / PLLP
|
||
* = 336,000,000 / 4 = 84,000,000
|
||
* USB OTG FS and SDIO Clock
|
||
* = PLL_VCO / PLLQ
|
||
* = 336,000,000 / 7 = 48,000,000
|
||
*
|
||
* REVISIT: Trimming of the HSI is not yet supported.
|
||
*/
|
||
|
||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(16)
|
||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
|
||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_4
|
||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
|
||
|
||
#define STM32_SYSCLK_FREQUENCY 84000000ul
|
||
|
||
/* AHB clock (HCLK) is SYSCLK (84MHz) */
|
||
|
||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
||
|
||
/* APB1 clock (PCLK1) is HCLK/2 (42MHz) */
|
||
|
||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
|
||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||
|
||
/* Timers driven from APB1 will be twice PCLK1 */
|
||
/* REVISIT */
|
||
|
||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
|
||
/* APB2 clock (PCLK2) is HCLK (84MHz) */
|
||
|
||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
|
||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/1)
|
||
|
||
/* Timers driven from APB2 will be twice PCLK2 */
|
||
/* REVISIT */
|
||
|
||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
|
||
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||
* otherwise frequency is 2xAPBx.
|
||
* Note: TIM1,8 are on APB2, others on APB1
|
||
*/
|
||
/* REVISIT */
|
||
|
||
#define STM32_TIM18_FREQUENCY (2*STM32_PCLK2_FREQUENCY)
|
||
#define STM32_TIM27_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||
|
||
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
||
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
||
* to service FIFOs in interrupt driven mode. These values have not been
|
||
* tuned!!!
|
||
*
|
||
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
|
||
*/
|
||
/* REVISIT */
|
||
|
||
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
|
||
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
|
||
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
||
*/
|
||
/* REVISIT */
|
||
|
||
#ifdef CONFIG_SDIO_DMA
|
||
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
#else
|
||
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
#endif
|
||
|
||
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
|
||
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
||
*/
|
||
/* REVISIT */
|
||
|
||
#ifdef CONFIG_SDIO_DMA
|
||
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
#else
|
||
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
#endif
|
||
|
||
/************************************************************************************
|
||
* Public Data
|
||
************************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
#undef EXTERN
|
||
#if defined(__cplusplus)
|
||
#define EXTERN extern "C"
|
||
extern "C"
|
||
{
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
/************************************************************************************
|
||
* Public Function Prototypes
|
||
************************************************************************************/
|
||
|
||
#undef EXTERN
|
||
#if defined(__cplusplus)
|
||
}
|
||
#endif
|
||
|
||
#endif /* __ASSEMBLY__ */
|
||
#endif /* __CONFIGS_NUCLEO_F401RE_INCLUDE_NUCLEO_F401RE_H */
|