Vytautas Lukenskas fd1de92016 There are some small problems in LPC43xx RS485 mode configuration. In particular: 1. UART0,2,3 do not have DTR pins (different from UART1), so, Kconfig needs to be adjusted. 2. lpc43_uart.c in RS485 mode only configures DIR pin, but doesn't enable pin output for UART0,2,3. 3. should be option to reverse DIR control pin output polarity. 4. lpc43xx/chip/lpc43_uart.h doesn't have USART3 definitions. NOTE: I didn't modified and didn't tested USART1, as it has different hardware. From Vytautas Lukenskas.		2016-09-30 08:51:49 -06:00
..
include	Fix names of pre-processor variables used in header file idempotence	2016-08-06 18:48:45 -06:00
src	There are some small problems in LPC43xx RS485 mode configuration. In particular: 1. UART0,2,3 do not have DTR pins (different from UART1), so, Kconfig needs to be adjusted. 2. lpc43_uart.c in RS485 mode only configures DIR pin, but doesn't enable pin output for UART0,2,3. 3. should be option to reverse DIR control pin output polarity. 4. lpc43xx/chip/lpc43_uart.h doesn't have USART3 definitions. NOTE: I didn't modified and didn't tested USART1, as it has different hardware. From Vytautas Lukenskas.	2016-09-30 08:51:49 -06:00
Kconfig	SPI bit order: Add configuration setting to indicate if an architecture-specif SPI implementation does or does not support LSB bit order.	2016-08-08 12:21:20 -06:00