249 lines
8.9 KiB
C
249 lines
8.9 KiB
C
/****************************************************************************
|
|
* boards/arm/stm32/nucleo-f302r8/include/board.h
|
|
* include/arch/board/board.h
|
|
*
|
|
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
|
|
* Author: Mateusz Szafoni <raiden00@railab.me>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_STM32_NUCLEOF302R8_INCLUDE_BOARD_H
|
|
#define __BOARDS_ARM_STM32_NUCLEOF302R8_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
# include <stdbool.h>
|
|
#endif
|
|
|
|
#ifdef __KERNEL__
|
|
# include "stm32.h"
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* HSI - Internal 8 MHz RC Oscillator
|
|
* LSI - 32 KHz RC
|
|
* HSE - On-board crystal frequency is 8MHz
|
|
* LSE - 32.768 kHz
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 8000000ul /* X1 on board */
|
|
|
|
#define STM32_HSI_FREQUENCY 8000000ul
|
|
#define STM32_LSI_FREQUENCY 40000 /* Between 30kHz and 60kHz */
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768 /* X2 on board */
|
|
|
|
/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is
|
|
* 8MHz (XTAL) x 9 = 72MHz
|
|
*/
|
|
|
|
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
|
|
#define STM32_CFGR_PLLXTPRE 0
|
|
#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx9
|
|
#define STM32_PLL_FREQUENCY (9*STM32_BOARD_XTAL)
|
|
|
|
/* Use the PLL and set the SYSCLK source to be the PLL */
|
|
|
|
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
|
|
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
|
|
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
|
|
|
/* APB2 clock (PCLK2) is HCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
|
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 1 and 8, 15-17 */
|
|
|
|
/* APB2 timers 1 and 8, 15-17 will receive PCLK2. */
|
|
|
|
/* Timers driven from APB2 will be PCLK2 */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM15_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM16_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM17_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* APB1 timers 2-7 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* USB divider -- Divide PLL clock by 1.5 */
|
|
|
|
#define STM32_CFGR_USBPRE 0
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,8 are on APB2, others on APB1
|
|
*/
|
|
|
|
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM2_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM3_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM4_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM5_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM6_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM7_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
/* LED definitions **********************************************************/
|
|
|
|
/* The Nucleo F302R8 board has three LEDs. Two of these are controlled by
|
|
* logic on the board and are not available for software control:
|
|
*
|
|
* LD1 COM: LD1 default status is red. LD1 turns to green to indicate that
|
|
* communications are in progress between the PC and the
|
|
* ST-LINK/V2-1.
|
|
* LD3 PWR: red LED indicates that the board is powered.
|
|
*
|
|
* And one can be controlled by software:
|
|
*
|
|
* User LD2: green LED is a user LED connected to the I/O PA5 of the
|
|
* STM32F302R8T6.
|
|
*
|
|
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LED in
|
|
* any way. The following definition is used to access the LED.
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0 /* User LD2 */
|
|
#define BOARD_NLEDS 1
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board
|
|
* the Nucleo F302R8. The following definitions describe how NuttX controls
|
|
* the LED:
|
|
*
|
|
* SYMBOL Meaning LED1 state
|
|
* ------------------ ----------------------- ----------
|
|
* LED_STARTED NuttX has been started OFF
|
|
* LED_HEAPALLOCATE Heap has been allocated OFF
|
|
* LED_IRQSENABLED Interrupts enabled OFF
|
|
* LED_STACKCREATED Idle stack created ON
|
|
* LED_INIRQ In an interrupt No change
|
|
* LED_SIGNAL In a signal handler No change
|
|
* LED_ASSERTION An assertion failed No change
|
|
* LED_PANIC The system has crashed Blinking
|
|
* LED_IDLE STM32 is is sleep mode Not used
|
|
*/
|
|
|
|
#define LED_STARTED 0
|
|
#define LED_HEAPALLOCATE 0
|
|
#define LED_IRQSENABLED 0
|
|
#define LED_STACKCREATED 1
|
|
#define LED_INIRQ 2
|
|
#define LED_SIGNAL 2
|
|
#define LED_ASSERTION 2
|
|
#define LED_PANIC 1
|
|
|
|
/* Button definitions *******************************************************/
|
|
|
|
/* The Nucleo F302R8 supports two buttons; only one button is controllable
|
|
* by software:
|
|
*
|
|
* B1 USER: user button connected to the I/O PC13 of the STM32F302R8T6.
|
|
* B2 RESET: push button connected to NRST is used to RESET the
|
|
* STM32F302R8T6.
|
|
*/
|
|
|
|
#define BUTTON_USER 0
|
|
#define NUM_BUTTONS 1
|
|
|
|
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
|
|
|
/* Alternate function pin selections ****************************************/
|
|
|
|
/* USART */
|
|
|
|
/* By default the USART2 is connected to STLINK Virtual COM Port:
|
|
* USART2_RX - PA3
|
|
* USART2_TX - PA2
|
|
*/
|
|
|
|
#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PA3 */
|
|
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PA2 */
|
|
|
|
/* PWM configuration ********************************************************/
|
|
|
|
/* TIM1 PWM */
|
|
|
|
#define STM32_TIM1_TRGO 0
|
|
|
|
#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_2 /* PA8 */
|
|
#define GPIO_TIM1_CH1NOUT GPIO_TIM1_CH1N_3 /* PA11 */
|
|
#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_2 /* PA9 */
|
|
#define GPIO_TIM1_CH2NOUT GPIO_TIM1_CH2N_2 /* PA12 */
|
|
#define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_2 /* PA10 */
|
|
#define GPIO_TIM1_CH3NOUT GPIO_TIM1_CH3N_3 /* PB1 */
|
|
|
|
/* TIM2 PWM */
|
|
|
|
#define GPIO_TIM2_CH1OUT GPIO_TIM2_CH1_ETR_1 /* PA0 */
|
|
#define GPIO_TIM2_CH2OUT GPIO_TIM2_CH2OUT_1 /* PA1 */
|
|
#define GPIO_TIM2_CH3OUT GPIO_TIM2_CH3OUT_1 /* PA9 */
|
|
|
|
/* DMA channels *************************************************************/
|
|
|
|
/* ADC */
|
|
|
|
#define ADC1_DMA_CHAN DMACHAN_ADC1 /* DMA1_CH1 */
|
|
|
|
#endif /* __BOARDS_ARM_STM32_NUCLEO_F302R8_INCLUDE_BOARD_H */
|