nuttx/drivers/power/supply/regulator_gpio.c
Xiang Xiao 8582a12388 drivers: Reorganize the power related code layout
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-08-04 10:28:28 +03:00

168 lines
5.3 KiB
C

/****************************************************************************
* drivers/power/supply/regulator_gpio.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <nuttx/ioexpander/ioexpander.h>
#include <nuttx/kmalloc.h>
#include <nuttx/power/regulator.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private
****************************************************************************/
struct regulator_gpio_priv
{
FAR struct ioexpander_dev_s *iodev;
FAR struct regulator_dev_s *rdev;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int regulator_gpio_enable(FAR struct regulator_dev_s *rdev);
static int regulator_gpio_disable(FAR struct regulator_dev_s *rdev);
static int regulator_gpio_is_enabled(FAR struct regulator_dev_s *rdev);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct regulator_ops_s g_regulator_gpio_ops =
{
NULL, /* list_voltage */
NULL, /* set_voltage */
NULL, /* set_voltage_sel */
NULL, /* get_voltage */
NULL, /* get_voltage_sel */
regulator_gpio_enable, /* enable */
regulator_gpio_is_enabled, /* is_enabled */
regulator_gpio_disable /* disable */
};
/****************************************************************************
* Private Functions
****************************************************************************/
static int regulator_gpio_enable(FAR struct regulator_dev_s *rdev)
{
FAR struct regulator_gpio_priv *priv = rdev->priv;
return IOEXP_WRITEPIN(priv->iodev, rdev->desc->enable_reg,
!!rdev->desc->enable_mask);
}
static int regulator_gpio_disable(FAR struct regulator_dev_s *rdev)
{
FAR struct regulator_gpio_priv *priv = rdev->priv;
return IOEXP_WRITEPIN(priv->iodev, rdev->desc->enable_reg,
!rdev->desc->enable_mask);
}
static int regulator_gpio_is_enabled(FAR struct regulator_dev_s *rdev)
{
FAR struct regulator_gpio_priv *priv = rdev->priv;
bool val;
if (!IOEXP_READPIN(priv->iodev, rdev->desc->enable_reg, &val))
{
return val ^ !rdev->desc->enable_mask;
}
else
{
return -EINVAL;
}
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: regulator_gpio_init
*
* Description:
*
* Input Parameters:
*
* iodev - The ioexpander dev pointer.
* desc - The regulator desc pointer, must contain follow section
* name - The regulator name.
* enable_reg - The regulator gpio pin number.
* enable_mask -
* true : enable is high, disable is low
* false: enable is low, disable is high
*
* Returned Value:
*
****************************************************************************/
int regulator_gpio_init(FAR struct ioexpander_dev_s *iodev,
FAR const struct regulator_desc_s *desc)
{
FAR struct regulator_gpio_priv *priv;
int ret;
if (!iodev || !desc)
{
return -EINVAL;
}
priv = kmm_zalloc(sizeof(struct regulator_gpio_priv));
if (!priv)
{
return -ENOMEM;
}
priv->iodev = iodev;
ret = IOEXP_SETDIRECTION(priv->iodev, desc->enable_reg,
IOEXPANDER_DIRECTION_OUT);
if (ret >= 0)
{
priv->rdev = regulator_register(desc,
&g_regulator_gpio_ops,
priv);
if (priv->rdev == NULL)
{
ret = -EINVAL;
}
}
if (ret < 0)
{
kmm_free(priv);
}
return ret;
}