nuttx

analog

Driver for the 24-Bit Differential Input ADC ADS1242 that communicates via SPI with a MCU. Reading the ADC conversion result as well as configuring the ADC, setting the input channel, etc. is implemented via ioctl calls. However, it does not yet implement the standard ADC interface.

2016-01-29 07:41:23 -06:00

audio

The I2C_TRANSFER method is no longer optional

2016-01-31 14:16:05 -06:00

binfmt

Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier

2015-12-13 08:10:01 -06:00

crypto

Add implementatino of Tiny Encryption Algorithm

2016-01-19 16:37:45 -06:00

eeprom

Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet

2014-12-05 09:13:34 -06:00

fs

I2C: Add an I2C character driver

2016-02-02 08:30:54 -06:00

i2c

I2C driver should support the RESET method as well

2016-02-03 07:32:25 -06:00

input

The I2C_TRANSFER method is no longer optional

2016-01-31 14:16:05 -06:00

ioexpander

Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.

2016-01-30 08:36:47 -06:00

lcd

The I2C_TRANSFER method is no longer optional

2016-01-31 14:16:05 -06:00

leds

RGB LED driver

2016-02-22 08:43:32 -06:00

mm

Add procfs/kmm to show the state of the kernel heap

2016-02-06 11:35:30 -06:00

modem

drivers/modem/u-blox.c and include/nuttx/drivers/u-blox.h: Add an upper half driver for the U-Blox Modem. From Vladimir Komendantskiy

2016-01-30 07:37:43 -06:00

mtd

Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.

2016-01-30 08:36:47 -06:00

net

net/: Finish IEEE802154->6LOWPAN renaming; remove PF_IEEE804154; Move 6LoWPAN menu to inside Internet Protocol Menu

2016-02-27 07:26:20 -06:00

nx

Implement anti-aliasing in the NuttX graphics line drawing

2015-07-14 10:17:42 -06:00

power

Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.

2016-01-30 08:36:47 -06:00

sensors

The I2C_TRANSFER method is no longer optional

2016-01-31 14:16:05 -06:00

sercomm

Standardize the width of all comment boxes in header files

2015-10-02 17:48:24 -06:00

serial

Implement high level DMA infrastructure for serial devices

2015-11-12 14:16:19 -06:00

spi

drivers/wireless/ieee802154/Kconfig

2016-02-26 18:39:27 -06:00

syslog

Clean up and review of header files for conformance to standards

2015-06-12 18:07:47 -06:00

timers

Add I2C frequency to the i2c_msg_s structure

2016-02-01 14:17:20 -06:00

usb

Standardize the width of all comment boxes in C header files

2015-10-03 07:45:15 -06:00

video

Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.

2016-01-30 08:36:47 -06:00

wireless

net/: Finish IEEE802154->6LOWPAN renaming; remove PF_IEEE804154; Move 6LoWPAN menu to inside Internet Protocol Menu

2016-02-27 07:26:20 -06:00

.gitignore

…

addrenv.h

…

arch.h

SMP: Cosmetic renaming to clarify functionality of SMP interfaces. Update comments.

2016-02-17 13:36:25 -06:00

ascii.h

…

board.h

Add a command to boardctl() to obtain a baord unique ID

2015-11-18 07:31:53 -06:00

can.h

Update some comments

2016-01-18 16:27:46 -06:00

clock.h

Networking: Remove the HSEC argument from devif_timer.

2016-02-03 12:12:41 -06:00

compiler.h

compiler.h: Missing IOBJ/IPTR definitions for the ZDS-II toolchain

2016-01-31 12:44:44 -06:00

configdata.h

SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM

2015-03-19 14:53:05 -06:00

float.h

Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.

2015-09-01 13:52:29 -04:00

init.h

Update submodule; Improve some comments

2016-02-05 10:23:39 -06:00

irq.h

Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()

2016-02-14 16:19:15 -06:00

kmalloc.h

Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking

2016-02-16 19:33:22 -06:00

kthread.h

…

lib.h

…

math32.h

Add more 32-bit math operations; Update ChangeLog

2016-01-25 11:19:25 -06:00

math.h

Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.

2015-09-01 13:52:29 -04:00

mmcsd.h

Remove the final vestiges of up_spiinitialize()

2016-01-27 09:27:56 -06:00

module.h

Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier

2015-12-13 08:10:01 -06:00

mqueue.h

signals: Basic framework to support SIGEV_THREAD

2015-12-30 13:20:31 -06:00

page.h

…

pgalloc.h

…

poff.h

Standardize the width of all comment boxes in header files

2015-10-02 17:48:24 -06:00

progmem.h

drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h

2015-11-12 13:40:18 -06:00

pthread.h

Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np().

2016-02-19 17:33:35 -06:00

pwm.h

PWM: Add support for multiple output channels per timer

2015-11-01 17:15:12 -05:00

regex.h

Standardize some header files

2015-02-16 14:29:43 -06:00

rwbuffer.h

Standardize the width of all comment boxes in header files

2015-10-02 17:48:24 -06:00

sched.h

Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np().

2016-02-19 17:33:35 -06:00

scsi.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sdio.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

semaphore.h

Update some comments

2016-03-06 13:50:26 -06:00

signal.h

signals: Adds a very limited, minimal implementation for SIGEV_THREAD

2015-12-30 15:01:14 -06:00

spawn.h

…

spinlock.h

Fix a typo introduced in the last commit and a file that was missed in the last commit

2016-02-19 16:03:01 -06:00

stdarg.h

Some typos noted by David Sidrane

2015-02-23 11:49:02 -06:00

streams.h

Introduce support for Atmel toolchain in-flash strings

2016-01-05 10:29:29 -06:00

symtab.h

Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier

2015-12-13 08:10:01 -06:00

time.h

Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.

2015-04-08 06:56:43 -06:00

tree.h

…

userspace.h

Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.

2015-07-10 08:37:02 -06:00

vt100.h

…

wdog.h

The delay parameter has 'int' type while explicit int32_t is used in sigtimedwait() (sig_timedwait.c) This can lead to wrong argument for systems that have default int size different than int32 (namely AVR).

2016-01-05 07:58:04 -06:00

wqueue.h

Update to use 64-bit timer when available

2016-01-21 11:54:26 -06:00