sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ff2dd12c3c
nuttx/drivers/wireless/ieee80211/bcm43xxx/bcmf_netdev.c
Alin Jerpelea 08e5378b11 NuttX: Gregory Nutt: update licenses to Apache 
Several licenses were missed in the initial work

David Sidrane has submitted the ICLA and we can migrate the licenses
 to Apache.

Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-03 04:20:31 -07:00

1150 lines
31 KiB
C
Raw Blame History

/****************************************************************************
* drivers/wireless/ieee80211/bcm43xxx/bcmf_netdev.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && defined(CONFIG_IEEE80211_BROADCOM_FULLMAC)
#include <stdint.h>
#include <stdbool.h>
#include <time.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <arpa/inet.h>
#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <nuttx/wdog.h>
#include <nuttx/wqueue.h>
#include <nuttx/net/arp.h>
#include <nuttx/net/netdev.h>
#include <nuttx/wireless/wireless.h>
#ifdef CONFIG_NET_PKT
# include <nuttx/net/pkt.h>
#endif
#include "bcmf_driver.h"
#include "bcmf_cdc.h"
#include "bcmf_bdc.h"
#include "bcmf_ioctl.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* If processing is not done at the interrupt level, then work queue support
* is required.
*/
#if !defined(CONFIG_SCHED_WORKQUEUE)
# error Work queue support is required in this configuration (CONFIG_SCHED_WORKQUEUE)
#endif
/* The low priority work queue is preferred. If it is not enabled, LPWORK
* will be the same as HPWORK.
*
* NOTE: However, the network should NEVER run on the high priority work
* queue! That queue is intended only to service short back end interrupt
* processing that never suspends. Suspending the high priority work queue
* may bring the system to its knees!
*/
#define BCMFWORK LPWORK
/* CONFIG_IEEE80211_BROADCOM_NINTERFACES determines the number of physical
* interfaces that will be supported.
*/
#ifndef CONFIG_IEEE80211_BROADCOM_NINTERFACES
# define CONFIG_IEEE80211_BROADCOM_NINTERFACES 1
#endif
/* TX poll delay = 1 seconds.
* CLK_TCK is the number of clock ticks per second
*/
#define BCMF_WDDELAY (1*CLK_TCK)
/* TX timeout = 1 minute */
#define BCMF_TXTIMEOUT (60*CLK_TCK)
/* This is a helper pointer for accessing the contents of Ethernet header */
#define BUF ((struct eth_hdr_s *)priv->bc_dev.d_buf)
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Common TX logic */
static int bcmf_transmit(FAR struct bcmf_dev_s *priv,
FAR struct bcmf_frame_s *frame);
static void bcmf_receive(FAR struct bcmf_dev_s *priv);
static int bcmf_txpoll(FAR struct net_driver_s *dev);
static void bcmf_rxpoll(FAR void *arg);
/* Watchdog timer expirations */
static void bcmf_poll_work(FAR void *arg);
static void bcmf_poll_expiry(wdparm_t arg);
/* NuttX callback functions */
static int bcmf_ifup(FAR struct net_driver_s *dev);
static int bcmf_ifdown(FAR struct net_driver_s *dev);
static void bcmf_txavail_work(FAR void *arg);
static int bcmf_txavail(FAR struct net_driver_s *dev);
#if defined(CONFIG_NET_MCASTGROUP) || defined(CONFIG_NET_ICMPv6)
static int bcmf_addmac(FAR struct net_driver_s *dev,
FAR const uint8_t *mac);
#ifdef CONFIG_NET_MCASTGROUP
static int bcmf_rmmac(FAR struct net_driver_s *dev,
FAR const uint8_t *mac);
#endif
#ifdef CONFIG_NET_ICMPv6
static void bcmf_ipv6multicast(FAR struct bcmf_dev_s *priv);
#endif
#endif
#ifdef CONFIG_NETDEV_IOCTL
static int bcmf_ioctl(FAR struct net_driver_s *dev, int cmd,
unsigned long arg);
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
int bcmf_netdev_alloc_tx_frame(FAR struct bcmf_dev_s *priv)
{
if (priv->cur_tx_frame != NULL)
{
/* Frame available */
return OK;
}
/* Allocate frame for TX */
priv->cur_tx_frame = bcmf_bdc_allocate_frame(priv,
MAX_NETDEV_PKTSIZE, true);
if (!priv->cur_tx_frame)
{
wlerr("ERROR: Cannot allocate TX frame\n");
return -ENOMEM;
}
return OK;
}
/****************************************************************************
* Name: bcmf_transmit
*
* Description:
* Start hardware transmission. Called either from the txdone interrupt
* handling or from watchdog based polling.
*
* Input Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* the network is locked.
*
****************************************************************************/
static int bcmf_transmit(FAR struct bcmf_dev_s *priv,
struct bcmf_frame_s *frame)
{
int ret;
frame->len = priv->bc_dev.d_len +
(unsigned int)(frame->data - frame->base);
ret = bcmf_bdc_transmit_frame(priv, frame);
if (ret)
{
wlerr("ERROR: Failed to transmit frame\n");
return -EIO;
}
NETDEV_TXPACKETS(&priv->bc_dev);
return OK;
}
/****************************************************************************
* Name: bcmf_receive
*
* Description:
* An interrupt was received indicating the availability of a new RX packet
*
* Input Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static void bcmf_receive(FAR struct bcmf_dev_s *priv)
{
struct bcmf_frame_s *frame;
do
{
/* Request frame buffer from bus interface */
frame = bcmf_bdc_rx_frame(priv);
if (frame == NULL)
{
/* No more frame to process */
break;
}
if (!priv->bc_bifup)
{
/* Interface down, drop frame */
priv->bus->free_frame(priv, frame);
continue;
}
priv->bc_dev.d_buf = frame->data;
priv->bc_dev.d_len = frame->len - (frame->data - frame->base);
wlinfo("Got frame %p %d\n", frame, priv->bc_dev.d_len);
#ifdef CONFIG_NET_PKT
/* When packet sockets are enabled, feed the frame into the tap */
pkt_input(&priv->bc_dev);
#endif
/* Check if this is an 802.1Q VLAN tagged packet */
if (BUF->type == HTONS(TPID_8021QVLAN))
{
/* Need to remove the 4 octet VLAN Tag, by moving src and dest
* addresses 4 octets to the right, and then read the actual
* ethertype. The VLAN ID and priority fields are currently
* ignored.
*/
uint8_t temp_buffer[12];
memcpy(temp_buffer, frame->data, 12);
memcpy(frame->data + 4, temp_buffer, 12);
priv->bc_dev.d_buf = frame->data = frame->data + 4;
priv->bc_dev.d_len -= 4;
}
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv4
if (BUF->type == HTONS(ETHTYPE_IP))
{
ninfo("IPv4 frame\n");
NETDEV_RXIPV4(&priv->bc_dev);
/* Handle ARP on input then give the IPv4 packet to the network
* layer
*/
arp_ipin(&priv->bc_dev);
ipv4_input(&priv->bc_dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, d_len field will set to a value > 0.
*/
if (priv->bc_dev.d_len > 0)
{
/* Update the Ethernet header with the correct MAC address */
#ifdef CONFIG_NET_IPv6
if (IFF_IS_IPv4(priv->bc_dev.d_flags))
#endif
{
arp_out(&priv->bc_dev);
}
#ifdef CONFIG_NET_IPv6
else
{
neighbor_out(&kel->bc_dev);
}
#endif
/* And send the packet */
bcmf_transmit(priv, frame);
}
else
{
/* Release RX frame buffer */
priv->bus->free_frame(priv, frame);
}
}
else
#endif
#ifdef CONFIG_NET_IPv6
if (BUF->type == HTONS(ETHTYPE_IP6))
{
ninfo("IPv6 frame\n");
NETDEV_RXIPV6(&priv->bc_dev);
/* Give the IPv6 packet to the network layer */
ipv6_input(&priv->bc_dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, d_len field will set to a value > 0.
*/
if (priv->bc_dev.d_len > 0)
{
/* Update the Ethernet header with the correct MAC address */
#ifdef CONFIG_NET_IPv4
if (IFF_IS_IPv4(priv->bc_dev.d_flags))
{
arp_out(&priv->bc_dev);
}
else
#endif
#ifdef CONFIG_NET_IPv6
{
neighbor_out(&priv->bc_dev);
}
#endif
/* And send the packet */
bcmf_transmit(priv, frame);
}
else
{
/* Release RX frame buffer */
priv->bus->free_frame(priv, frame);
}
}
else
#endif
#ifdef CONFIG_NET_ARP
if (BUF->type == htons(ETHTYPE_ARP))
{
arp_arpin(&priv->bc_dev);
NETDEV_RXARP(&priv->bc_dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, d_len field will set to a value > 0.
*/
if (priv->bc_dev.d_len > 0)
{
bcmf_transmit(priv, frame);
}
else
{
/* Release RX frame buffer */
priv->bus->free_frame(priv, frame);
}
}
else
#endif
{
/* On some routers, it may constantly receive mysterious packet...
* https://www.wireshark.org/docs/wsar_html/epan/etypes_8h.html
* for more etypes definitions.
*/
NETDEV_RXDROPPED(&priv->bc_dev);
priv->bus->free_frame(priv, frame);
}
}
while (1); /* While there are more packets to be processed */
}
/****************************************************************************
* Name: bcmf_txpoll
*
* Description:
* The transmitter is available, check if the network has any outgoing
* packets ready to send. This is a callback from devif_poll().
* devif_poll() may be called:
*
* 1. When the preceding TX packet send is complete,
* 2. When the preceding TX packet send times out and the interface is
* reset
* 3. During normal TX polling
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* the network is locked.
*
****************************************************************************/
static int bcmf_txpoll(FAR struct net_driver_s *dev)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* If the polling resulted in data that should be sent out on the network,
* the field d_len is set to a value > 0.
*/
if (priv->bc_dev.d_len > 0)
{
/* Look up the destination MAC address and add it to the Ethernet
* header.
*/
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
if (IFF_IS_IPv4(priv->bc_dev.d_flags))
#endif
{
arp_out(&priv->bc_dev);
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else
#endif
{
neighbor_out(&priv->bc_dev);
}
#endif /* CONFIG_NET_IPv6 */
if (!devif_loopback(&priv->bc_dev))
{
/* Send the packet */
bcmf_transmit(priv, priv->cur_tx_frame);
/* TODO: Check if there is room in the device to hold another
* packet. If not, return a non-zero value to terminate the poll.
*/
priv->cur_tx_frame = NULL;
return 1;
}
}
/* If zero is returned, the polling will continue until all connections
* have been examined.
*/
return 0;
}
/****************************************************************************
* Name: bcmf_rxpoll
*
* Description:
* Process RX frames
*
* Input Parameters:
* arg - context of device to use
*
* Returned Value:
* OK on success
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static void bcmf_rxpoll(FAR void *arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Lock the network and serialize driver operations if necessary.
* NOTE: Serialization is only required in the case where the driver work
* is performed on an LP worker thread and where more than one LP worker
* thread has been configured.
*/
net_lock();
bcmf_receive(priv);
/* Check if a packet transmission just completed. If so, call bcmf_txdone.
* This may disable further Tx interrupts if there are no pending
* transmissions.
*/
#if 0
bcmf_txdone(priv);
#endif
net_unlock();
}
/****************************************************************************
* Name: bcmf_netdev_notify_tx_done
*
* Description:
* Notify callback called when TX frame is sent and freed.
*
* Assumptions:
*
****************************************************************************/
void bcmf_netdev_notify_tx_done(FAR struct bcmf_dev_s *priv)
{
/* Schedule to perform a poll for new Tx data the worker thread. */
work_queue(BCMFWORK, &priv->bc_pollwork, bcmf_poll_work, priv, 0);
}
/****************************************************************************
* Name: bcmf_netdev_notify_rx
*
* Description:
* Notify callback called when RX frame is available
*
* Assumptions:
*
****************************************************************************/
void bcmf_netdev_notify_rx(FAR struct bcmf_dev_s *priv)
{
/* Queue a job to process RX frames */
work_queue(BCMFWORK, &priv->bc_pollwork, bcmf_rxpoll, priv, 0);
}
/****************************************************************************
* Name: bcmf_poll_work
*
* Description:
* Perform periodic polling from the worker thread
*
* Input Parameters:
* arg - The argument passed when work_queue() as called.
*
* Returned Value:
* OK on success
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static void bcmf_poll_work(FAR void *arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Lock the network and serialize driver operations if necessary.
* NOTE: Serialization is only required in the case where the driver work
* is performed on an LP worker thread and where more than one LP worker
* thread has been configured.
*/
net_lock();
/* Perform the poll */
/* Check if there is room in the send another TX packet. We cannot perform
* the TX poll if he are unable to accept another packet for transmission.
*/
if (bcmf_netdev_alloc_tx_frame(priv))
{
goto exit_unlock;
}
/* If so, update TCP timing states and poll the network for new XMIT data.
* Hmmm.. might be bug here. Does this mean if there is a transmit in
* progress, we will missing TCP time state updates?
*/
priv->bc_dev.d_buf = priv->cur_tx_frame->data;
priv->bc_dev.d_len = 0;
devif_timer(&priv->bc_dev, BCMF_WDDELAY, bcmf_txpoll);
/* Setup the watchdog poll timer again */
wd_start(&priv->bc_txpoll, BCMF_WDDELAY,
bcmf_poll_expiry, (wdparm_t)priv);
exit_unlock:
net_unlock();
}
/****************************************************************************
* Name: bcmf_poll_expiry
*
* Description:
* Periodic timer handler. Called from the timer interrupt handler.
*
* Input Parameters:
* arg - The argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void bcmf_poll_expiry(wdparm_t arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Schedule to perform the interrupt processing on the worker thread. */
work_queue(BCMFWORK, &priv->bc_pollwork, bcmf_poll_work, priv, 0);
}
/****************************************************************************
* Name: bcmf_ifup
*
* Description:
* NuttX Callback: Bring up the Ethernet interface when an IP address is
* provided
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int bcmf_ifup(FAR struct net_driver_s *dev)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
#ifdef CONFIG_NET_IPv4
ninfo("Bringing up: %d.%d.%d.%d\n",
(int)(dev->d_ipaddr & 0xff),
(int)((dev->d_ipaddr >> 8) & 0xff),
(int)((dev->d_ipaddr >> 16) & 0xff),
(int)(dev->d_ipaddr >> 24));
#endif
#ifdef CONFIG_NET_IPv6
ninfo("Bringing up: %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
dev->d_ipv6addr[0], dev->d_ipv6addr[1], dev->d_ipv6addr[2],
dev->d_ipv6addr[3], dev->d_ipv6addr[4], dev->d_ipv6addr[5],
dev->d_ipv6addr[6], dev->d_ipv6addr[7]);
#endif
/* Instantiate MAC address from priv->bc_dev.d_mac.ether.ether_addr_octet */
#ifdef CONFIG_NET_ICMPv6
/* Set up IPv6 multicast address filtering */
bcmf_ipv6multicast(priv);
#endif
/* Set and activate a timer process */
wd_start(&priv->bc_txpoll, BCMF_WDDELAY,
bcmf_poll_expiry, (wdparm_t)priv);
/* Enable the hardware interrupt */
priv->bc_bifup = true;
return OK;
}
/****************************************************************************
* Name: bcmf_ifdown
*
* Description:
* NuttX Callback: Stop the interface.
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int bcmf_ifdown(FAR struct net_driver_s *dev)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
irqstate_t flags;
/* Disable the hardware interrupt */
flags = enter_critical_section();
#warning Missing logic
/* Cancel the TX poll timer */
wd_cancel(&priv->bc_txpoll);
/* Put the EMAC in its reset, non-operational state. This should be
* a known configuration that will guarantee the bcmf_ifup() always
* successfully brings the interface back up.
*/
/* Mark the device "down" */
priv->bc_bifup = false;
leave_critical_section(flags);
return OK;
}
/****************************************************************************
* Name: bcmf_txavail_work
*
* Description:
* Perform an out-of-cycle poll on the worker thread.
*
* Input Parameters:
* arg - Reference to the NuttX driver state structure (cast to void*)
*
* Returned Value:
* None
*
* Assumptions:
* Called on the higher priority worker thread.
*
****************************************************************************/
static void bcmf_txavail_work(FAR void *arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Lock the network and serialize driver operations if necessary.
* NOTE: Serialization is only required in the case where the driver work
* is performed on an LP worker thread and where more than one LP worker
* thread has been configured.
*/
net_lock();
/* Ignore the notification if the interface is not yet up */
if (priv->bc_bifup)
{
/* Check if there is room in the hardware to hold another packet. */
if (bcmf_netdev_alloc_tx_frame(priv))
{
goto exit_unlock;
}
/* If so, then poll the network for new XMIT data */
priv->bc_dev.d_buf = priv->cur_tx_frame->data;
priv->bc_dev.d_len = 0;
devif_timer(&priv->bc_dev, 0, bcmf_txpoll);
}
exit_unlock:
net_unlock();
}
/****************************************************************************
* Name: bcmf_txavail
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Called in normal user mode
*
****************************************************************************/
static int bcmf_txavail(FAR struct net_driver_s *dev)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* Is our single work structure available? It may not be if there are
* pending interrupt actions and we will have to ignore the Tx
* availability action.
*/
if (work_available(&priv->bc_pollwork))
{
/* Schedule to serialize the poll on the worker thread. */
work_queue(BCMFWORK, &priv->bc_pollwork, bcmf_txavail_work, priv, 0);
}
return OK;
}
/****************************************************************************
* Name: bcmf_addmac
*
* Description:
* NuttX Callback: Add the specified MAC address to the hardware multicast
* address filtering
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be added
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#if defined(CONFIG_NET_MCASTGROUP) || defined(CONFIG_NET_ICMPv6)
static int bcmf_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Name: bcmf_rmmac
*
* Description:
* NuttX Callback: Remove the specified MAC address from the hardware
* multicast address filtering
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be removed
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_MCASTGROUP
static int bcmf_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Name: bcmf_ipv6multicast
*
* Description:
* Configure the IPv6 multicast MAC address.
*
* Input Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_ICMPv6
static void bcmf_ipv6multicast(FAR struct bcmf_dev_s *priv)
{
FAR struct net_driver_s *dev;
uint16_t tmp16;
uint8_t mac[6];
/* For ICMPv6, we need to add the IPv6 multicast address
*
* For IPv6 multicast addresses, the Ethernet MAC is derived by
* the four low-order octets OR'ed with the MAC 33:33:00:00:00:00,
* so for example the IPv6 address FF02:DEAD:BEEF::1:3 would map
* to the Ethernet MAC address 33:33:00:01:00:03.
*
* NOTES: This appears correct for the ICMPv6 Router Solicitation
* Message, but the ICMPv6 Neighbor Solicitation message seems to
* use 33:33:ff:01:00:03.
*/
mac[0] = 0x33;
mac[1] = 0x33;
dev = &priv->bc_dev;
tmp16 = dev->d_ipv6addr[6];
mac[2] = 0xff;
mac[3] = tmp16 >> 8;
tmp16 = dev->d_ipv6addr[7];
mac[4] = tmp16 & 0xff;
mac[5] = tmp16 >> 8;
ninfo("IPv6 Multicast: %02x:%02x:%02x:%02x:%02x:%02x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
bcmf_addmac(dev, mac);
#ifdef CONFIG_NET_ICMPv6_AUTOCONF
/* Add the IPv6 all link-local nodes Ethernet address. This is the
* address that we expect to receive ICMPv6 Router Advertisement
* packets.
*/
bcmf_addmac(dev, g_ipv6_ethallnodes.ether_addr_octet);
#endif /* CONFIG_NET_ICMPv6_AUTOCONF */
#ifdef CONFIG_NET_ICMPv6_ROUTER
/* Add the IPv6 all link-local routers Ethernet address. This is the
* address that we expect to receive ICMPv6 Router Solicitation
* packets.
*/
bcmf_addmac(dev, g_ipv6_ethallrouters.ether_addr_octet);
#endif /* CONFIG_NET_ICMPv6_ROUTER */
}
#endif /* CONFIG_NET_ICMPv6 */
/****************************************************************************
* Name: bcmf_ioctl
*
* Description:
* Handle network IOCTL commands directed to this device.
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
* cmd - The IOCTL command
* arg - The argument for the IOCTL command
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NETDEV_IOCTL
static int bcmf_ioctl(FAR struct net_driver_s *dev, int cmd,
unsigned long arg)
{
int ret;
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* Decode and dispatch the driver-specific IOCTL command */
switch (cmd)
{
case SIOCSIWSCAN:
ret = bcmf_wl_start_scan(priv, (struct iwreq *)arg);
break;
case SIOCGIWSCAN:
ret = bcmf_wl_get_scan_results(priv, (struct iwreq *)arg);
break;
case SIOCSIFHWADDR: /* Set device MAC address */
ret = bcmf_wl_set_mac_address(priv, (struct ifreq *)arg);
break;
case SIOCSIWAUTH:
ret = bcmf_wl_set_auth_param(priv, (struct iwreq *)arg);
break;
case SIOCSIWENCODEEXT:
ret = bcmf_wl_set_encode_ext(priv, (struct iwreq *)arg);
break;
case SIOCSIWFREQ: /* Set channel/frequency (Hz) */
wlwarn("WARNING: SIOCSIWFREQ not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWFREQ: /* Get channel/frequency (Hz) */
wlwarn("WARNING: SIOCGIWFREQ not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWMODE: /* Set operation mode */
ret = bcmf_wl_set_mode(priv, (struct iwreq *)arg);
break;
case SIOCGIWMODE: /* Get operation mode */
wlwarn("WARNING: SIOCGIWMODE not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWAP: /* Set access point MAC addresses */
wlwarn("WARNING: SIOCSIWAP not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWAP: /* Get access point MAC addresses */
wlwarn("WARNING: SIOCGIWAP not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWESSID: /* Set ESSID (network name) */
ret = bcmf_wl_set_ssid(priv, (struct iwreq *)arg);
break;
case SIOCGIWESSID: /* Get ESSID */
wlwarn("WARNING: SIOCGIWESSID not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWRATE: /* Set default bit rate (bps) */
wlwarn("WARNING: SIOCSIWRATE not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWRATE: /* Get default bit rate (bps) */
wlwarn("WARNING: SIOCGIWRATE not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWTXPOW: /* Set transmit power (dBm) */
wlwarn("WARNING: SIOCSIWTXPOW not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWTXPOW: /* Get transmit power (dBm) */
wlwarn("WARNING: SIOCGIWTXPOW not implemented\n");
ret = -ENOSYS;
break;
default:
nerr("ERROR: Unrecognized IOCTL command: %d\n", cmd);
ret = -ENOTTY; /* Special return value for this case */
break;
}
return ret;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: bcmf_netdev_register
*
* Description:
* Register a network driver and set Broadcom chip in a proper state
*
* Input Parameters:
* priv - Broadcom driver device
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
int bcmf_netdev_register(FAR struct bcmf_dev_s *priv)
{
uint32_t out_len;
/* Initialize network driver structure */
memset(&priv->bc_dev, 0, sizeof(priv->bc_dev));
priv->bc_dev.d_ifup = bcmf_ifup; /* I/F up (new IP address) callback */
priv->bc_dev.d_ifdown = bcmf_ifdown; /* I/F down callback */
priv->bc_dev.d_txavail = bcmf_txavail; /* New TX data callback */
#ifdef CONFIG_NET_MCASTGROUP
priv->bc_dev.d_addmac = bcmf_addmac; /* Add multicast MAC address */
priv->bc_dev.d_rmmac = bcmf_rmmac; /* Remove multicast MAC address */
#endif
#ifdef CONFIG_NETDEV_IOCTL
priv->bc_dev.d_ioctl = bcmf_ioctl; /* Handle network IOCTL commands */
#endif
priv->bc_dev.d_private = priv; /* Used to recover private state from dev */
/* Initialize network stack interface buffer */
priv->cur_tx_frame = NULL;
priv->bc_dev.d_buf = NULL;
/* Put the interface in the down state. This usually amounts to resetting
* the device and/or calling bcmf_ifdown().
*/
/* Enable chip */
if (bcmf_wl_enable(priv, true) != OK)
{
return -EIO;
}
/* Query MAC address */
out_len = ETHER_ADDR_LEN;
if (bcmf_cdc_iovar_request(priv, CHIP_STA_INTERFACE, false,
IOVAR_STR_CUR_ETHERADDR,
priv->bc_dev.d_mac.ether.ether_addr_octet,
&out_len) != OK)
{
return -EIO;
}
/* Register the device with the OS so that socket IOCTLs can be performed */
netdev_register(&priv->bc_dev, NET_LL_IEEE80211);
return OK;
}
#endif /* CONFIG_NET && CONFIG_IEEE80211_BROADCOM_FULLMAC */
Reference in New Issue View Git Blame Copy Permalink