sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ffac2a314b
nuttx/drivers/mtd/mx25rxx.c
Petro Karashchenko d499ac9d58 nuttx: fix multiple 'FAR', 'CODE' and style issues 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2024-08-25 19:22:15 +08:00

1217 lines
37 KiB
C
Raw Blame History

/****************************************************************************
* drivers/mtd/mx25rxx.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <inttypes.h>
#include <stdbool.h>
#include <stdint.h>
#ifdef CONFIG_MX25RXX_SECTOR512
# include <stdlib.h>
# include <string.h>
#endif
#include <nuttx/kmalloc.h>
#include <nuttx/signal.h>
#include <nuttx/signal.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/spi/qspi.h>
#include <nuttx/mtd/mtd.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* MX25RXX Commands */
#define MX25R_READ 0x03 /* Read data bytes */
#define MX25R_FAST_READ 0x0b /* Higher speed read */
#define MX25R_2READ 0xbb /* 2 x I/O read command */
#define MX25R_DREAD 0x3b /* 1I / 2O read command */
#define MX25R_4READ 0xeb /* 4 x I/O read command */
#define MX25R_QREAD 0x6b /* 1I / 4O read command */
#define MX25R_PP 0x02 /* Page program */
#define MX25R_4PP 0x38 /* Quad page program */
#define MX25R_SE 0x20 /* 4Kb Sector erase */
#define MX25R_BE32 0x52 /* 32Kbit block Erase */
#define MX25R_BE64 0xd8 /* 64Kbit block Erase */
#define MX25R_CE 0xc7 /* Chip erase */
#define MX25R_CE_ALT 0x60 /* Chip erase (alternate) */
#define MX25R_WREN 0x06 /* Write Enable */
#define MX25R_WRDI 0x04 /* Write Disable */
#define MX25R_RDSR 0x05 /* Read status register */
#define MX25R_RDCR 0x15 /* Read config register */
#define MX25R_WRSR 0x01 /* Write stat/conf register */
#define MX25R_RDID 0x9f /* Read identification */
#define MX25R_RES 0xab /* Read electronic ID */
#define MX25R_REMS 0x90 /* Read manufacture and ID */
#define MX25R_DP 0xb9 /* Deep power down */
#define MX25R_RDP 0xab /* Release deep power down */
#define MX25R_PGM_SUSPEND 0x75 /* Suspends program */
#define MX25R_ERS_SUSPEND 0xb0 /* Suspends erase */
#define MX25R_PGM_RESUME 0x7A /* Resume program */
#define MX25R_ERS_RESUME 0x30 /* Resume erase */
#define MX25R_ENSO 0xb1 /* Enter secured OTP */
#define MX25R_EXSO 0xc1 /* Exit secured OTP */
#define MX25R_RDSCUR 0x2b /* Read security register */
#define MX25R_WRSCUR 0x2f /* Write security register */
#define MX25R_RSTEN 0x66 /* Reset Enable */
#define MX25R_RST 0x99 /* Reset Memory */
#define MX25R_RDSFDP 0x5a /* read out until CS# high */
#define MX25R_SBL 0xc0 /* Set Burst Length */
#define MX25R_SBL_ALT 0x77 /* Set Burst Length */
#define MX25R_NOP 0x00 /* No Operation */
/* MX25Rxx Registers */
/* Read ID (RDID) register values */
#define MX25R_MANUFACTURER 0xc2 /* Macronix manufacturer ID */
#define MX25R6435F_DEVID 0x17 /* MX25R6435F device ID */
/* JEDEC Read ID register values */
#define MX25R_JEDEC_MANUFACTURER 0xc2 /* Macronix manufacturer ID */
#ifdef CONFIG_MX25RXX_LXX
# define MX25R_JEDEC_MEMORY_TYPE 0x20 /* MX25Lx memory type */
#else
# define MX25R_JEDEC_MEMORY_TYPE 0x28 /* MX25Rx memory type */
#endif
#define MX25R_JEDEC_MX25L25673G_CAPACITY 0x19 /* MX25L25673G memory capacity */
#define MX25R_JEDEC_MX25R6435F_CAPACITY 0x17 /* MX25R6435F memory capacity */
#define MX25R_JEDEC_MX25R8035F_CAPACITY 0x14 /* MX25R8035F memory capacity */
/* Supported chips parameters */
/* MX25R6435F (64 MB) memory capacity */
#define MX25R6435F_SECTOR_SIZE (4*1024)
#define MX25R6435F_SECTOR_SHIFT (12)
#define MX25R6435F_SECTOR_COUNT (2048)
#define MX25R6435F_PAGE_SIZE (256)
/* MX25L25673G (256 MB) memory capacity */
#define MX25L25673G_SECTOR_SIZE (4*1024)
#define MX25L25673G_SECTOR_SHIFT (12)
#define MX25L25673G_SECTOR_COUNT (8192)
#define MX25L25673G_PAGE_SIZE (256)
#ifdef CONFIG_MX25RXX_PAGE128
# define MX25R6435F_PAGE_SHIFT (7)
# define MX25L25673G_PAGE_SHIFT (7)
#else
# define MX25R6435F_PAGE_SHIFT (8)
# define MX25L25673G_PAGE_SHIFT (8)
#endif
/* Status register bit definitions */
#define MX25R_SR_WIP (1 << 0) /* Bit 0: Write in progress */
#define MX25R_SR_WEL (1 << 1) /* Bit 1: Write enable latch */
#define MX25R_SR_BP_SHIFT (2) /* Bits 2-5: Block protect bits */
#define MX25R_SR_BP_MASK (15 << MX25R_SR_BP_SHIFT)
#define MX25R_SR_QE (1 << 6) /* Bit 6: Quad enable */
#define MX25R_SR_SRWD (1 << 7) /* Bit 7: Status register write protect */
/* Configuration register bit definitions */
#define MX25R_CR_LH (1 << 9) /* Bit 9: Power mode */
#define MX25R_CR_TB (1 << 3) /* Bit 3: Top/bottom selected */
#define MX25R_CR_DC (1 << 6) /* Bit 6: Dummy cycle */
/* Cache flags **************************************************************/
#define MX25RXX_CACHE_VALID (1 << 0) /* 1=Cache has valid data */
#define MX25RXX_CACHE_DIRTY (1 << 1) /* 1=Cache is dirty */
#define MX25RXX_CACHE_ERASED (1 << 2) /* 1=Backing FLASH is erased */
#define IS_VALID(p) ((((p)->flags) & MX25RXX_CACHE_VALID) != 0)
#define IS_DIRTY(p) ((((p)->flags) & MX25RXX_CACHE_DIRTY) != 0)
#define IS_ERASED(p) ((((p)->flags) & MX25RXX_CACHE_ERASED) != 0)
#define SET_VALID(p) do { (p)->flags |= MX25RXX_CACHE_VALID; } while (0)
#define SET_DIRTY(p) do { (p)->flags |= MX25RXX_CACHE_DIRTY; } while (0)
#define SET_ERASED(p) do { (p)->flags |= MX25RXX_CACHE_ERASED; } while (0)
#define CLR_VALID(p) do { (p)->flags &= ~MX25RXX_CACHE_VALID; } while (0)
#define CLR_DIRTY(p) do { (p)->flags &= ~MX25RXX_CACHE_DIRTY; } while (0)
#define CLR_ERASED(p) do { (p)->flags &= ~MX25RXX_CACHE_ERASED; } while (0)
/* 512 byte sector support **************************************************/
#define MX25RXX_SECTOR512_SHIFT 9
#define MX25RXX_SECTOR512_SIZE (1 << 9)
#define MX25RXX_ERASED_STATE 0xff
/****************************************************************************
* Private Types
****************************************************************************/
/* Internal state of the MTD device */
struct mx25rxx_dev_s
{
struct mtd_dev_s mtd; /* MTD interface */
FAR struct qspi_dev_s *qspi; /* QuadSPI interface */
FAR uint8_t *cmdbuf; /* Allocated command buffer */
uint8_t sectorshift; /* Log2 of sector size */
uint8_t pageshift; /* Log2 of page size */
uint16_t nsectors; /* Number of erase sectors */
#ifdef CONFIG_MX25RXX_SECTOR512
uint8_t flags; /* Buffered sector flags */
uint16_t esectno; /* Erase sector number in the cache */
FAR uint8_t *sector; /* Allocated sector data */
#endif
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* MTD driver methods */
static int mx25rxx_erase(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks);
static ssize_t mx25rxx_bread(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR uint8_t *buf);
static ssize_t mx25rxx_bwrite(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR const uint8_t *buf);
static ssize_t mx25rxx_read(FAR struct mtd_dev_s *dev, off_t offset,
size_t nbytes, FAR uint8_t *buffer);
static int mx25rxx_ioctl(FAR struct mtd_dev_s *dev, int cmd,
unsigned long arg);
/* Internal driver methods */
static void mx25rxx_lock(FAR struct qspi_dev_s *qspi, bool read);
static void mx25rxx_unlock(FAR struct qspi_dev_s *qspi);
static int mx25rxx_command_read(FAR struct qspi_dev_s *qspi, uint8_t cmd,
FAR void *buffer, size_t buflen);
static int mx25rxx_command_write(FAR struct qspi_dev_s *qspi, uint8_t cmd,
FAR const void *buffer, size_t buflen);
static int mx25rxx_command(FAR struct qspi_dev_s *qspi, uint8_t cmd);
static int mx25rxx_command_address(FAR struct qspi_dev_s *qspi, uint8_t cmd,
off_t addr, uint8_t addrlen);
static int mx25rxx_readid(FAR struct mx25rxx_dev_s *dev);
static int mx25rxx_read_byte(FAR struct mx25rxx_dev_s *dev,
FAR uint8_t *buffer, off_t address,
size_t buflen);
static int mx25rxx_read_status(FAR struct mx25rxx_dev_s *dev);
static int mx25rxx_read_configuration(FAR struct mx25rxx_dev_s *dev);
static void mx25rxx_write_status_config(FAR struct mx25rxx_dev_s *dev,
uint8_t status, uint16_t config);
static void mx25rxx_write_enable(FAR struct mx25rxx_dev_s *dev, bool enable);
static int mx25rxx_write_page(FAR struct mx25rxx_dev_s *priv,
FAR const uint8_t *buffer,
off_t address,
size_t buflen);
static int mx25rxx_erase_sector(FAR struct mx25rxx_dev_s *priv,
off_t sector);
#if 0 /* FIXME: Not used */
static int mx25rxx_erase_block(FAR struct mx25rxx_dev_s *priv, off_t block);
#endif
static int mx25rxx_erase_chip(FAR struct mx25rxx_dev_s *priv);
#ifdef CONFIG_MX25RXX_SECTOR512
static int mx25rxx_flush_cache(FAR struct mx25rxx_dev_s *priv);
static FAR uint8_t *mx25rxx_read_cache(FAR struct mx25rxx_dev_s *priv,
off_t sector);
static void mx25rxx_erase_cache(FAR struct mx25rxx_dev_s *priv,
off_t sector);
static int mx25rxx_write_cache(FAR struct mx25rxx_dev_s *priv,
FAR const uint8_t *buffer, off_t sector,
size_t nsectors);
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
void mx25rxx_lock(FAR struct qspi_dev_s *qspi, bool read)
{
/* On SPI buses where there are multiple devices, it will be necessary to
* lock SPI to have exclusive access to the buses for a sequence of
* transfers. The bus should be locked before the chip is selected.
*
* This is a blocking call and will not return until we have exclusive
* access to the SPI bus. We will retain that exclusive access until the
* bus is unlocked.
*/
QSPI_LOCK(qspi, true);
/* After locking the SPI bus, the we also need call the setfrequency,
* setbits and setmode methods to make sure that the SPI is properly
* configured for the device. If the SPI bus is being shared, then it
* may have been left in an incompatible state.
*/
QSPI_SETMODE(qspi, CONFIG_MX25RXX_QSPIMODE);
QSPI_SETBITS(qspi, 8);
QSPI_SETFREQUENCY(qspi,
read ? CONFIG_MX25RXX_QSPI_READ_FREQUENCY :
CONFIG_MX25RXX_QSPI_FREQUENCY);
}
void mx25rxx_unlock(FAR struct qspi_dev_s *qspi)
{
QSPI_LOCK(qspi, false);
}
int mx25rxx_command_read(FAR struct qspi_dev_s *qspi, uint8_t cmd,
FAR void *buffer, size_t buflen)
{
struct qspi_cmdinfo_s cmdinfo;
finfo("CMD: %02x buflen: %lu\n", cmd, (unsigned long)buflen);
cmdinfo.flags = QSPICMD_READDATA;
cmdinfo.addrlen = 0;
cmdinfo.cmd = cmd;
cmdinfo.buflen = buflen;
cmdinfo.addr = 0;
cmdinfo.buffer = buffer;
return QSPI_COMMAND(qspi, &cmdinfo);
}
int mx25rxx_command_write(FAR struct qspi_dev_s *qspi, uint8_t cmd,
FAR const void *buffer, size_t buflen)
{
struct qspi_cmdinfo_s cmdinfo;
finfo("CMD: %02x buflen: %lu 0x%" PRIx32 "\n",
cmd, (unsigned long)buflen, *(FAR uint32_t *)buffer);
cmdinfo.flags = QSPICMD_WRITEDATA;
cmdinfo.addrlen = 0;
cmdinfo.cmd = cmd;
cmdinfo.buflen = buflen;
cmdinfo.addr = 0;
cmdinfo.buffer = (FAR void *)buffer;
return QSPI_COMMAND(qspi, &cmdinfo);
}
int mx25rxx_command(FAR struct qspi_dev_s *qspi, uint8_t cmd)
{
struct qspi_cmdinfo_s cmdinfo;
finfo("CMD: %02x\n", cmd);
cmdinfo.flags = 0;
cmdinfo.addrlen = 0;
cmdinfo.cmd = cmd;
cmdinfo.buflen = 0;
cmdinfo.addr = 0;
cmdinfo.buffer = NULL;
return QSPI_COMMAND(qspi, &cmdinfo);
}
int mx25rxx_command_address(FAR struct qspi_dev_s *qspi, uint8_t cmd,
off_t addr, uint8_t addrlen)
{
struct qspi_cmdinfo_s cmdinfo;
finfo("CMD: %02x Address: %04lx addrlen=%d\n",
cmd, (unsigned long)addr, addrlen);
cmdinfo.flags = QSPICMD_ADDRESS;
cmdinfo.addrlen = addrlen;
cmdinfo.cmd = cmd;
cmdinfo.buflen = 0;
cmdinfo.addr = addr;
cmdinfo.buffer = NULL;
return QSPI_COMMAND(qspi, &cmdinfo);
}
int mx25rxx_read_byte(FAR struct mx25rxx_dev_s *dev, FAR uint8_t *buffer,
off_t address, size_t buflen)
{
struct qspi_meminfo_s meminfo;
finfo("address: %08lx nbytes: %d\n", (long)address, (int)buflen);
meminfo.flags = QSPIMEM_READ | QSPIMEM_QUADIO;
meminfo.addrlen = 3;
/* Ignore performance enhanced mode => 2+4 dummies */
meminfo.dummies = 6;
meminfo.buflen = buflen;
meminfo.cmd = MX25R_4READ;
meminfo.addr = address;
meminfo.buffer = buffer;
return QSPI_MEMORY(dev->qspi, &meminfo);
}
int mx25rxx_write_page(FAR struct mx25rxx_dev_s *priv,
FAR const uint8_t *buffer,
off_t address, size_t buflen)
{
struct qspi_meminfo_s meminfo;
unsigned int pagesize;
unsigned int npages;
int ret;
int i;
finfo("address: %08lx buflen: %u\n",
(unsigned long)address, (unsigned)buflen);
npages = (buflen >> priv->pageshift);
pagesize = (1 << priv->pageshift);
/* Set up non-varying parts of transfer description */
meminfo.flags = QSPIMEM_WRITE | QSPIMEM_QUADIO;
meminfo.cmd = MX25R_4PP;
meminfo.addrlen = 3;
meminfo.buflen = pagesize;
meminfo.dummies = 0;
/* Then write each page */
for (i = 0; i < npages; i++)
{
/* Set up varying parts of the transfer description */
meminfo.addr = address;
meminfo.buffer = (FAR void *)buffer;
/* Write one page */
mx25rxx_write_enable(priv, true);
ret = QSPI_MEMORY(priv->qspi, &meminfo);
mx25rxx_write_enable(priv, false);
if (ret < 0)
{
ferr("ERROR: QSPI_MEMORY failed writing address=%06jx\n",
(intmax_t)address);
return ret;
}
/* Update for the next time through the loop */
buffer += pagesize;
address += pagesize;
}
/* Wait for write operation to finish */
do
{
mx25rxx_read_status(priv);
ret = priv->cmdbuf[0];
}
while ((ret & MX25R_SR_WIP) != 0);
return OK;
}
int mx25rxx_erase_sector(FAR struct mx25rxx_dev_s *priv, off_t sector)
{
off_t address;
uint8_t status;
finfo("sector: %08lx\n", (unsigned long)sector);
/* Get the address associated with the sector */
address = (off_t)sector << priv->sectorshift;
/* Send the sector erase command */
mx25rxx_write_enable(priv, true);
mx25rxx_command_address(priv->qspi, MX25R_SE, address, 3);
/* Wait for erasure to finish */
do
{
nxsig_usleep(50 * 1000);
mx25rxx_read_status(priv);
status = priv->cmdbuf[0];
}
while ((status & MX25R_SR_WIP) != 0);
return OK;
}
#if 0 /* FIXME: Not used */
int mx25rxx_erase_block(FAR struct mx25rxx_dev_s *priv, off_t block)
{
uint8_t status;
finfo("block: %08lx\n", (unsigned long)block);
/* Send the 64k block erase command */
mx25rxx_write_enable(priv, true);
mx25rxx_command_address(priv->qspi, MX25R_BE64, block << 16, 3);
/* Wait for erasure to finish */
do
{
nxsig_usleep(300 * 1000);
mx25rxx_read_status(priv);
status = priv->cmdbuf[0];
}
while ((status & MX25R_SR_WIP) != 0);
return OK;
}
#endif
int mx25rxx_erase_chip(FAR struct mx25rxx_dev_s *priv)
{
uint8_t status;
/* Erase the whole chip */
mx25rxx_write_enable(priv, true);
mx25rxx_command(priv->qspi, MX25R_CE);
/* Wait for the erasure to complete */
mx25rxx_read_status(priv);
status = priv->cmdbuf[0];
while ((status & MX25R_SR_WIP) != 0)
{
nxsig_sleep(2);
mx25rxx_read_status(priv);
status = priv->cmdbuf[0];
}
return OK;
}
void mx25rxx_write_enable(FAR struct mx25rxx_dev_s *dev, bool enable)
{
uint8_t status;
do
{
mx25rxx_command(dev->qspi, enable ? MX25R_WREN : MX25R_WRDI);
mx25rxx_read_status(dev);
status = dev->cmdbuf[0];
}
while ((status & MX25R_SR_WEL) ^ (enable ? MX25R_SR_WEL : 0));
}
int mx25rxx_read_status(FAR struct mx25rxx_dev_s *dev)
{
return mx25rxx_command_read(dev->qspi, MX25R_RDSR, dev->cmdbuf, 1);
}
int mx25rxx_read_configuration(FAR struct mx25rxx_dev_s *dev)
{
return mx25rxx_command_read(dev->qspi, MX25R_RDCR, dev->cmdbuf, 4);
}
void mx25rxx_write_status_config(FAR struct mx25rxx_dev_s *dev,
uint8_t status,
uint16_t config)
{
mx25rxx_write_enable(dev, true);
/* take care to mask of the SRP bit; it is one-time-programmable */
config &= ~MX25R_CR_TB;
dev->cmdbuf[0] = status | 2;
dev->cmdbuf[1] = config & 0xff;
dev->cmdbuf[2] = config >> 8;
#ifdef CONFIG_MX25RXX_LXX
mx25rxx_command_write(dev->qspi, MX25R_WRSR, dev->cmdbuf, 2);
#else
mx25rxx_command_write(dev->qspi, MX25R_WRSR, dev->cmdbuf, 3);
#endif
mx25rxx_write_enable(dev, false);
}
int mx25rxx_erase(FAR struct mtd_dev_s *dev,
off_t startblock,
size_t nblocks)
{
FAR struct mx25rxx_dev_s *priv = (FAR struct mx25rxx_dev_s *)dev;
size_t blocksleft = nblocks;
#ifdef CONFIG_MX25RXX_SECTOR512
int ret;
#endif
finfo("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks);
/* Lock access to the SPI bus until we complete the erase */
mx25rxx_lock(priv->qspi, false);
while (blocksleft-- > 0)
{
/* Erase each sector */
#ifdef CONFIG_MX25RXX_SECTOR512
mx25rxx_erase_cache(priv, startblock);
#else
mx25rxx_erase_sector(priv, startblock);
#endif
startblock++;
}
#ifdef CONFIG_MX25RXX_SECTOR512
/* Flush the last erase block left in the cache */
ret = mx25rxx_flush_cache(priv);
if (ret < 0)
{
nblocks = ret;
}
#endif
#if 0
/* FIXME: use mx25rxx_erase_block in case CONFIG_MX25RXX_SECTOR512 is
* not configured to speed up block erase.
*/
unsigned int sectorsperblock = (64 * 1024) >> priv->sectorshift;
while (blocksleft > 0)
{
/* Check if current block is aligned on 64k block to speed up erase */
if (((startblock & (sectorsperblock - 1)) == 0) &&
(blocksleft >= sectorsperblock))
{
/* Erase 64k block */
mx25rxx_erase_block(priv, startblock >> (16 - priv->sectorshift));
startblock += sectorsperblock;
blocksleft -= sectorsperblock;
}
else
{
/* Erase each sector */
mx25rxx_erase_sector(priv, startblock);
startblock++;
blocksleft--;
}
}
#endif
mx25rxx_unlock(priv->qspi);
return (int)nblocks;
}
ssize_t mx25rxx_bread(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR uint8_t *buf)
{
#ifndef CONFIG_MX25RXX_SECTOR512
FAR struct mx25rxx_dev_s *priv = (FAR struct mx25rxx_dev_s *)dev;
#endif
ssize_t nbytes;
finfo("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks);
/* On this device, we can handle the block read just like the
* byte-oriented read
*/
#ifdef CONFIG_MX25RXX_SECTOR512
nbytes = mx25rxx_read(dev, startblock << MX25RXX_SECTOR512_SHIFT,
nblocks << MX25RXX_SECTOR512_SHIFT, buf);
if (nbytes > 0)
{
nbytes >>= MX25RXX_SECTOR512_SHIFT;
}
#else
nbytes = mx25rxx_read(dev, startblock << priv->pageshift,
nblocks << priv->pageshift, buf);
if (nbytes > 0)
{
nbytes >>= priv->pageshift;
}
#endif
return nbytes;
}
ssize_t mx25rxx_bwrite(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR const uint8_t *buf)
{
FAR struct mx25rxx_dev_s *priv = (FAR struct mx25rxx_dev_s *)dev;
int ret;
finfo("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks);
/* Lock the QuadSPI bus and write all of the pages to FLASH */
mx25rxx_lock(priv->qspi, false);
#if defined(CONFIG_MX25RXX_SECTOR512)
ret = mx25rxx_write_cache(priv, buf, startblock, nblocks);
if (ret < 0)
{
ferr("ERROR: mx25rxx_write_cache failed: %d\n", ret);
}
#else
ret = mx25rxx_write_page(priv, buf, startblock << priv->pageshift,
nblocks << priv->pageshift);
if (ret < 0)
{
ferr("ERROR: mx25rxx_write_page failed: %d\n", ret);
}
#endif
mx25rxx_unlock(priv->qspi);
return ret < 0 ? ret : nblocks;
}
ssize_t mx25rxx_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes,
FAR uint8_t *buffer)
{
int ret;
FAR struct mx25rxx_dev_s *priv = (FAR struct mx25rxx_dev_s *)dev;
finfo("offset: %08lx nbytes: %d\n", (long)offset, (int)nbytes);
/* Lock the QuadSPI bus and select this FLASH part */
mx25rxx_lock(priv->qspi, true);
ret = mx25rxx_read_byte(priv, buffer, offset, nbytes);
mx25rxx_unlock(priv->qspi);
if (ret < 0)
{
ferr("ERROR: mx25rxx_read_byte returned: %d\n", ret);
return (ssize_t)ret;
}
finfo("return nbytes: %d\n", (int)nbytes);
return (ssize_t)nbytes;
}
int mx25rxx_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg)
{
FAR struct mx25rxx_dev_s *priv = (FAR struct mx25rxx_dev_s *)dev;
int ret = -EINVAL; /* Assume good command with bad parameters */
finfo("cmd: %d\n", cmd);
switch (cmd)
{
case MTDIOC_GEOMETRY:
{
FAR struct mtd_geometry_s *geo =
(FAR struct mtd_geometry_s *)((uintptr_t)arg);
if (geo)
{
memset(geo, 0, sizeof(*geo));
/* Populate the geometry structure with information need to
* know the capacity and how to access the device.
*
* NOTE:
* that the device is treated as though it where just an
* array of fixed size blocks. That is most likely not true,
* but the client will expect the device logic to do whatever
* is necessary to make it appear so.
*/
#ifdef CONFIG_MX25RXX_SECTOR512
geo->blocksize = (1 << MX25RXX_SECTOR512_SHIFT);
geo->erasesize = (1 << MX25RXX_SECTOR512_SHIFT);
geo->neraseblocks = priv->nsectors <<
(priv->sectorshift -
MX25RXX_SECTOR512_SHIFT);
#else
geo->blocksize = (1 << priv->pageshift);
geo->erasesize = (1 << priv->sectorshift);
geo->neraseblocks = priv->nsectors;
#endif
ret = OK;
finfo("blocksize: %" PRId32
" erasesize: %" PRId32
" neraseblocks: %" PRId32 "\n",
geo->blocksize, geo->erasesize, geo->neraseblocks);
}
}
break;
case BIOC_PARTINFO:
{
FAR struct partition_info_s *info =
(FAR struct partition_info_s *)arg;
if (info != NULL)
{
#ifdef CONFIG_MX25RXX_SECTOR512
info->numsectors = priv->nsectors <<
(priv->sectorshift - MX25RXX_SECTOR512_SHIFT);
info->sectorsize = 1 << MX25RXX_SECTOR512_SHIFT;
#else
info->numsectors = priv->nsectors <<
(priv->sectorshift - priv->pageshift);
info->sectorsize = 1 << priv->pageshift;
#endif
info->startsector = 0;
info->parent[0] = '\0';
ret = OK;
}
}
break;
case MTDIOC_BULKERASE:
{
/* Erase the entire device */
mx25rxx_lock(priv->qspi, false);
ret = mx25rxx_erase_chip(priv);
mx25rxx_unlock(priv->qspi);
}
break;
case MTDIOC_ERASESTATE:
{
FAR uint8_t *result = (FAR uint8_t *)arg;
*result = MX25RXX_ERASED_STATE;
ret = OK;
}
break;
default:
ret = -ENOTTY; /* Bad/unsupported command */
break;
}
finfo("return %d\n", ret);
return ret;
}
int mx25rxx_readid(FAR struct mx25rxx_dev_s *dev)
{
/* Lock the QuadSPI bus and configure the bus. */
mx25rxx_lock(dev->qspi, false);
/* Read the JEDEC ID */
mx25rxx_command_read(dev->qspi, MX25R_RDID, dev->cmdbuf, 3);
/* Unlock the bus */
mx25rxx_unlock(dev->qspi);
finfo("Manufacturer: %02x Device Type %02x, Capacity: %02x\n",
dev->cmdbuf[0], dev->cmdbuf[1], dev->cmdbuf[2]);
/* Check for Macronix MX25Rxx chip */
if (dev->cmdbuf[0] != MX25R_JEDEC_MANUFACTURER ||
dev->cmdbuf[1] != MX25R_JEDEC_MEMORY_TYPE)
{
ferr("ERROR: Unrecognized device type: 0x%02x 0x%02x\n",
dev->cmdbuf[0], dev->cmdbuf[1]);
return -ENODEV;
}
/* Check for a supported capacity */
switch (dev->cmdbuf[2])
{
case MX25R_JEDEC_MX25R6435F_CAPACITY:
dev->sectorshift = MX25R6435F_SECTOR_SHIFT;
dev->pageshift = MX25R6435F_PAGE_SHIFT;
dev->nsectors = MX25R6435F_SECTOR_COUNT;
break;
case MX25R_JEDEC_MX25L25673G_CAPACITY:
dev->sectorshift = MX25L25673G_SECTOR_SHIFT;
dev->pageshift = MX25L25673G_PAGE_SHIFT;
dev->nsectors = MX25L25673G_SECTOR_COUNT;
break;
default:
ferr("ERROR: Unsupported memory capacity: %02x\n", dev->cmdbuf[2]);
return -ENODEV;
}
return OK;
}
/****************************************************************************
* Name: mx25rxx_flush_cache
****************************************************************************/
#ifdef CONFIG_MX25RXX_SECTOR512
static int mx25rxx_flush_cache(FAR struct mx25rxx_dev_s *priv)
{
int ret = OK;
/* If the cache is dirty (meaning that it no longer matches the old FLASH
* contents) or was erased (with the cache containing the correct FLASH
* contents), then write the cached erase block to FLASH.
*/
if (IS_DIRTY(priv) || IS_ERASED(priv))
{
off_t address;
/* Convert the erase sector number into a FLASH address */
address = (off_t)priv->esectno << priv->sectorshift;
/* Write entire erase block to FLASH */
ret = mx25rxx_write_page(priv,
priv->sector,
address,
1 << priv->sectorshift);
if (ret < 0)
{
ferr("ERROR: mx25rxx_write_page failed: %d\n", ret);
}
/* The cache is no long dirty and the FLASH is no longer erased */
CLR_DIRTY(priv);
CLR_ERASED(priv);
}
return ret;
}
#endif /* CONFIG_MX25RXX_SECTOR512 */
/****************************************************************************
* Name: mx25rxx_read_cache
****************************************************************************/
#ifdef CONFIG_MX25RXX_SECTOR512
static FAR uint8_t *mx25rxx_read_cache(FAR struct mx25rxx_dev_s *priv,
off_t sector)
{
off_t esectno;
int shift;
int index;
int ret;
/* Convert from the 512 byte sector to the erase sector size of the device.
* For example, if the actual erase sector size is 4Kb (1 << 12), then we
* first shift to the right by 3 to get the sector number in 4096
* increments.
*/
shift = priv->sectorshift - MX25RXX_SECTOR512_SHIFT;
esectno = sector >> shift;
finfo("sector: %jd esectno: %jd (%d) shift=%d\n",
(intmax_t)sector, (intmax_t)esectno, priv->esectno, shift);
/* Check if the requested erase block is already in the cache */
if (!IS_VALID(priv) || esectno != priv->esectno)
{
/* No.. Flush any dirty erase block currently in the cache */
ret = mx25rxx_flush_cache(priv);
if (ret < 0)
{
ferr("ERROR: mx25rxx_flush_cache failed: %d\n", ret);
return NULL;
}
/* Read the erase block into the cache */
ret = mx25rxx_read_byte(priv, priv->sector,
(esectno << priv->sectorshift),
(1 << priv->sectorshift));
if (ret < 0)
{
ferr("ERROR: mx25rxx_read_byte failed: %d\n", ret);
return NULL;
}
/* Mark the sector as cached */
priv->esectno = esectno;
SET_VALID(priv); /* The data in the cache is valid */
CLR_DIRTY(priv); /* It should match the FLASH contents */
CLR_ERASED(priv); /* The underlying FLASH has not been erased */
}
/* Get the index to the 512 sector in the erase block that holds the
* argument
*/
index = sector & ((1 << shift) - 1);
/* Return the address in the cache that holds this sector */
return &priv->sector[index << MX25RXX_SECTOR512_SHIFT];
}
#endif /* CONFIG_MX25RXX_SECTOR512 */
/****************************************************************************
* Name: mx25rxx_erase_cache
****************************************************************************/
#ifdef CONFIG_MX25RXX_SECTOR512
static void mx25rxx_erase_cache(FAR struct mx25rxx_dev_s *priv, off_t sector)
{
FAR uint8_t *dest;
/* First, make sure that the erase block containing the 512 byte sector is
* in the cache.
*/
dest = mx25rxx_read_cache(priv, sector);
/* Erase the block containing this sector if it is not already erased.
* The erased indicated will be cleared when the data from the erase sector
* is read into the cache and set here when we erase the block.
*/
if (!IS_ERASED(priv))
{
off_t esectno = sector >>
(priv->sectorshift - MX25RXX_SECTOR512_SHIFT);
finfo("sector: %jd esectno: %jd\n",
(intmax_t)sector, (intmax_t)esectno);
DEBUGVERIFY(mx25rxx_erase_sector(priv, esectno));
SET_ERASED(priv);
}
/* Put the cached sector data into the erase state and mark the cache as
* dirty (but don't update the FLASH yet. The caller will do that at a
* more optimal time).
*/
memset(dest, MX25RXX_ERASED_STATE, MX25RXX_SECTOR512_SIZE);
SET_DIRTY(priv);
}
#endif /* CONFIG_MX25RXX_SECTOR512 */
/****************************************************************************
* Name: mx25rxx_write_cache
****************************************************************************/
#ifdef CONFIG_MX25RXX_SECTOR512
static int mx25rxx_write_cache(FAR struct mx25rxx_dev_s *priv,
FAR const uint8_t *buffer, off_t sector,
size_t nsectors)
{
FAR uint8_t *dest;
int ret;
for (; nsectors > 0; nsectors--)
{
/* First, make sure that the erase block containing 512 byte sector is
* in memory.
*/
dest = mx25rxx_read_cache(priv, sector);
/* Erase the block containing this sector if it is not already erased.
* The erased indicated will be cleared when the data from the erase
* sector is read into the cache and set here when we erase the sector.
*/
if (!IS_ERASED(priv))
{
off_t esectno = sector >>
(priv->sectorshift - MX25RXX_SECTOR512_SHIFT);
finfo("sector: %jd esectno: %jd\n",
(intmax_t)sector, (intmax_t)esectno);
ret = mx25rxx_erase_sector(priv, esectno);
if (ret < 0)
{
ferr("ERROR: mx25rxx_erase_sector failed: %d\n", ret);
return ret;
}
SET_ERASED(priv);
}
/* Copy the new sector data into cached erase block */
memcpy(dest, buffer, MX25RXX_SECTOR512_SIZE);
SET_DIRTY(priv);
/* Set up for the next 512 byte sector */
finfo("address: %08jx nbytes: %d 0x%04" PRIx32 "\n",
(intmax_t)(sector << MX25RXX_SECTOR512_SHIFT),
MX25RXX_SECTOR512_SIZE,
*(FAR uint32_t *)buffer);
buffer += MX25RXX_SECTOR512_SIZE;
sector++;
}
/* Flush the last erase block left in the cache */
return mx25rxx_flush_cache(priv);
}
#endif /* CONFIG_MX25RXX_SECTOR512 */
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mx25rxx_initialize
*
* Description:
* Create an initialize MTD device instance.
*
* MTD devices are not registered in the file system, but are created as
* instances that can be bound to other functions (such as a block or
* character driver front end).
*
****************************************************************************/
FAR struct mtd_dev_s *mx25rxx_initialize(FAR struct qspi_dev_s *qspi,
bool unprotect)
{
FAR struct mx25rxx_dev_s *dev;
int ret;
uint8_t status;
uint16_t config;
DEBUGASSERT(qspi != NULL);
/* Allocate a state structure (we allocate the structure instead of using
* a fixed, static allocation so that we can handle multiple FLASH devices.
* The current implementation would handle only one FLASH part per QuadSPI
* device (only because of the QSPIDEV_FLASH(0) definition) and so would
* have to be extended to handle multiple FLASH parts on the same QuadSPI
* bus.
*/
dev = kmm_zalloc(sizeof(*dev));
if (dev == NULL)
{
ferr("Failed to allocate mtd device\n");
return NULL;
}
dev->mtd.erase = mx25rxx_erase;
dev->mtd.bread = mx25rxx_bread;
dev->mtd.bwrite = mx25rxx_bwrite;
dev->mtd.read = mx25rxx_read;
dev->mtd.ioctl = mx25rxx_ioctl;
dev->mtd.name = "mx25rxx";
dev->qspi = qspi;
/* Allocate a 4-byte buffer to support DMA-able command data */
dev->cmdbuf = (FAR uint8_t *)QSPI_ALLOC(qspi, 4);
if (dev->cmdbuf == NULL)
{
ferr("Failed to allocate command buffer\n");
goto exit_free_dev;
}
/* Identify the FLASH chip and get its capacity */
ret = mx25rxx_readid(dev);
if (ret != OK)
{
/* Unrecognized! Discard all of that work we just did and return NULL */
ferr("Unrecognized QSPI device\n");
goto exit_free_cmdbuf;
}
#ifdef CONFIG_MX25RXX_SECTOR512 /* Simulate a 512 byte sector */
/* Allocate a buffer for the erase block cache */
dev->sector = (FAR uint8_t *)QSPI_ALLOC(qspi, 1 << dev->sectorshift);
if (dev->sector == NULL)
{
/* Allocation failed! Discard all of that work we just did and
* return NULL
*/
ferr("ERROR: Sector allocation failed\n");
goto exit_free_cmdbuf;
}
#endif
mx25rxx_lock(dev->qspi, false);
/* Set MTD device in low power mode, with minimum dummy cycles */
mx25rxx_write_status_config(dev, MX25R_SR_QE, 0x0000);
mx25rxx_read_status(dev);
status = dev->cmdbuf[0];
mx25rxx_read_configuration(dev);
config = *(FAR uint16_t *)(dev->cmdbuf);
/* Avoid compiler warnings in case info logs are disabled */
UNUSED(status);
UNUSED(config);
finfo("device ready 0x%02x 0x%04x\n", status, config);
mx25rxx_unlock(dev->qspi);
/* Return the implementation-specific state structure as the MTD device */
return &dev->mtd;
exit_free_cmdbuf:
QSPI_FREE(qspi, dev->cmdbuf);
exit_free_dev:
kmm_free(dev);
return NULL;
}
Reference in New Issue View Git Blame Copy Permalink