sergiotarxz
/
termux-packages
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
termux-packages/packages/texlive-bin/build.sh

121 lines
3.7 KiB
Bash
Raw Normal View History

Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_HOMEPAGE=https://www.tug.org/texlive/
texlive: Move files to std locations [WIP]
2017-10-09 09:31:25 +02:00
TERMUX_PKG_DESCRIPTION="TeX Live is a distribution of the TeX typesetting system. This package contains architecture dependent binaries."
add licenses for more packages
2019-01-21 13:53:58 +01:00
TERMUX_PKG_LICENSE="GPL-2.0"
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_MAINTAINER="Henrik Grimler @Grimler91"
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
TERMUX_PKG_VERSION=20220403
TERMUX_PKG_SRCURL=https://github.com/TeX-Live/texlive-source/archive/refs/heads/tags/texlive-${TERMUX_PKG_VERSION:0:4}.0.tar.gz
TERMUX_PKG_SHA256=e160606d25b6087c2d3520bfd2b852fd343eab3ab3ec90c07649ce1d1b49078d
TERMUX_PKG_DEPENDS="freetype, harfbuzz, harfbuzz-icu, libc++, libcairo, libgd, libgmp, libgraphite, libiconv, libicu, liblua52, libmpfr, libpaper, libpixman, libpng, teckit, zlib, zziplib"
texlive-bin: add dependencies
2019-01-20 18:39:20 +01:00
# libpcre, glib, fonconfig are dependencies to libcairo. pkg-config gives an error if they are missing
# libuuid, libxml2 are needed by fontconfig
no more develsplit + provide static libraries as separate package %ci:no-build
2019-07-20 10:42:33 +02:00
TERMUX_PKG_BUILD_DEPENDS="icu-devtools, pcre, glib, fontconfig, libuuid, libxml2"
TERMUX_PKG_BREAKS="texlive (<< 20180414), texlive-bin-dev"
TERMUX_PKG_REPLACES="texlive (<< 20170524-3), texlive-bin-dev"
texlive{,-full}: remove package It is one (soon two) years behind, and is a big hack: some of the debs are larger than our upload system can handle, and the file lists are generated from the tlpdb in a not so nice way that breaks horribly on every texlive release. Disk space is somewhat of a concern again on the host that fosshost gives us at no (!) cost, and removing texlive-full gives us ~1 GB of space. The reasonable thing to do would be to set up a separate "termux-texlive" repo, and create a package for every texlive package rather than for every collection as done here. Debian, ubuntu and friends properly creates subpackages. I am not really motivated to do this though, so if someone else has use of a properly packaged texlive and wants to look into it, then that would be great. Users that want to use texlive should install texlive-installer instead, it anyways allows for more convenient installation (you can freely choose which scheme and which packages to install).
2022-01-30 16:49:12 +01:00
TERMUX_PKG_RECOMMENDS="texlive-installer"
texlive-bin: host-build tools and rm texlive-binaries from setup-ubuntu.sh (#2689) Saves about 300 mb from docker image
2018-07-31 22:57:22 +02:00
TERMUX_PKG_HOSTBUILD=true
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
texlive: Move files to std locations [WIP]
2017-10-09 09:31:25 +02:00
TL_ROOT=$TERMUX_PREFIX/share/texlive
texlive: mv to science-packages instead (#5231) * texlive: mv to science-packages Might help decrease the bandwidth a little bit * texlive-bin: mv binaries to subfolder bin/texlive/ New package texlive-installer needs to be given a directory with texlive-binaries and then parses it to look for various programs
2020-05-01 23:37:22 +02:00
TL_BINDIR=$TERMUX_PREFIX/bin/texlive
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_EXTRA_CONFIGURE_ARGS="
texlive-bin: re-add ranlib configure arg
2018-10-07 15:47:49 +02:00
RANLIB=ranlib
texlive: mv to science-packages instead (#5231) * texlive: mv to science-packages Might help decrease the bandwidth a little bit * texlive-bin: mv binaries to subfolder bin/texlive/ New package texlive-installer needs to be given a directory with texlive-binaries and then parses it to look for various programs
2020-05-01 23:37:22 +02:00
--bindir=$TL_BINDIR
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--build=$TERMUX_BUILD_TUPLE
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--datarootdir=$TL_ROOT
--disable-dialog
--disable-gregorio
--disable-luajittex
texlive: mv to science-packages instead (#5231) * texlive: mv to science-packages Might help decrease the bandwidth a little bit * texlive-bin: mv binaries to subfolder bin/texlive/ New package texlive-installer needs to be given a directory with texlive-binaries and then parses it to look for various programs
2020-05-01 23:37:22 +02:00
--disable-makejvf
--disable-mendexk
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--disable-mflua
--disable-mfluajit
--disable-multiplatform
texlive: mv to science-packages instead (#5231) * texlive: mv to science-packages Might help decrease the bandwidth a little bit * texlive-bin: mv binaries to subfolder bin/texlive/ New package texlive-installer needs to be given a directory with texlive-binaries and then parses it to look for various programs
2020-05-01 23:37:22 +02:00
--disable-musixtnt
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--disable-native-texlive-build
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--disable-pmx
--disable-ps2pk
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--disable-psutils
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--disable-seetexk
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--disable-t1utils
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--disable-ttfdump
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--disable-xz
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--enable-dvisvgm
--enable-luatex
--enable-makeindexk
--infodir=$TERMUX_PREFIX/share/info
--mandir=$TERMUX_PREFIX/share/man
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--with-system-cairo
--with-system-gd
--with-system-gmp
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--with-system-graphite2
--with-system-harfbuzz
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--with-system-icu
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--with-system-libpaper
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--with-system-lua
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--with-system-mpfr
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--with-system-teckit
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--with-system-zlib
texlive-bin: use system zziplib Building zziplib with configure; make does not work on android (https://github.com/gdraheim/zziplib/issues/85) but building with cmake works fine, but to be able to use cmake we cannot build it during the texlive-bin build.
2020-09-23 08:56:42 +02:00
--with-system-zziplib
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--without-texi2html
--without-texinfo
texlive-bin: clean up configure args
2018-10-05 21:54:09 +02:00
--without-x
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
--without-xdvipdfmx
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
--with-banner-add=/Termux"
texlive-bin: patch to make it work with poppler 0.59.0 (#1606)
2017-10-08 15:05:27 +02:00
# These files are provided by texlive:
texlive: keep certain texmf-dist files in texlive-bin (texliveonfly, ...). Also add texlive as recommended package to texlive-bin.
2017-08-11 23:16:34 +02:00
TERMUX_PKG_RM_AFTER_INSTALL="
texlive: mv to science-packages instead (#5231) * texlive: mv to science-packages Might help decrease the bandwidth a little bit * texlive-bin: mv binaries to subfolder bin/texlive/ New package texlive-installer needs to be given a directory with texlive-binaries and then parses it to look for various programs
2020-05-01 23:37:22 +02:00
bin/a2ping
texlive: update to 2018 and update poppler patches to work with 0.64
2018-05-01 04:07:38 +02:00
bin/tlmgr
bin/man
texlive: Move files to std locations [WIP]
2017-10-09 09:31:25 +02:00
share/texlive/texmf-dist/web2c/mktex.opt
share/texlive/texmf-dist/web2c/mktexdir.opt
share/texlive/texmf-dist/web2c/mktexnam.opt
share/texlive/texmf-dist/web2c/fmtutil.cnf
share/texlive/texmf-dist/web2c/mktexdir
share/texlive/texmf-dist/web2c/mktexnam
share/texlive/texmf-dist/web2c/mktexupd
texlive: create a subpackage for each texlive-collection Add python script to find which files to include in which package. Add meta package texlive-full that depends on all collections. Move texmf.cnf from texlive-bin to texlive.
2018-08-28 09:08:07 +02:00
share/texlive/texmf-dist/web2c/texmf.cnf
share/texlive/texmf-dist/fonts
share/texlive/texmf-dist/doc
share/texlive/texmf-dist/dvips
share/texlive/texmf-dist/dvipdfmx
share/texlive/texmf-dist/texconfig
share/texlive/texmf-dist/bibtex
share/texlive/texmf-dist/scripts
share/texlive/texmf-dist/ttf2pk
share/texlive/texmf-dist/source
share/texlive/texmf-dist/chktex
texlive: update to 20200406 (#5138) * texlive-full: depend on texlive-bibtexextra as well Fixes https://github.com/termux/termux-packages/issues/4871 * texlive-tlmgr: remove package Will look at creating a "texlive-installer" package in the unstable repository instead. * texlive: fix paths in a couple of scripts Fixes https://github.com/termux/termux-packages/issues/4823. * texlive: upgrade to 20200410 * texlive-bin: fix path to host built otangle * texlive: fix tlpdb version * texlive: conflict with more subpackages from last year
2020-04-12 12:38:37 +02:00
share/texlive/texmf-dist/hbf2gf
"
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
Improve formatting of parantheses for functions
2019-02-08 10:37:29 +01:00
termux_step_host_build() {
texlive-bin: host-build tools and rm texlive-binaries from setup-ubuntu.sh (#2689) Saves about 300 mb from docker image
2018-07-31 22:57:22 +02:00
mkdir -p auxdir/auxsub
mkdir -p texk/kpathsea
mkdir -p texk/web2c
cd $TERMUX_PKG_HOSTBUILD_DIR/auxdir/auxsub
$TERMUX_PKG_SRCDIR/auxdir/auxsub/configure
make
cd $TERMUX_PKG_HOSTBUILD_DIR/texk/kpathsea
$TERMUX_PKG_SRCDIR/texk/kpathsea/configure
cd $TERMUX_PKG_HOSTBUILD_DIR/texk/web2c
$TERMUX_PKG_SRCDIR/texk/web2c/configure --without-x
make tangle
make ctangle
make tie
make otangle
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
make himktables
texlive-bin: host-build tools and rm texlive-binaries from setup-ubuntu.sh (#2689) Saves about 300 mb from docker image
2018-07-31 22:57:22 +02:00
}
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
termux_step_pre_configure() {
texlive-bin: host-build tools and rm texlive-binaries from setup-ubuntu.sh (#2689) Saves about 300 mb from docker image
2018-07-31 22:57:22 +02:00
export TANGLE=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/tangle
export TANGLEBOOT=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/tangleboot
export CTANGLE=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/ctangle
export CTANGLEBOOT=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/ctangleboot
export TIE=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/tie
texlive: update to 20200406 (#5138) * texlive-full: depend on texlive-bibtexextra as well Fixes https://github.com/termux/termux-packages/issues/4871 * texlive-tlmgr: remove package Will look at creating a "texlive-installer" package in the unstable repository instead. * texlive: fix paths in a couple of scripts Fixes https://github.com/termux/termux-packages/issues/4823. * texlive: upgrade to 20200410 * texlive-bin: fix path to host built otangle * texlive: fix tlpdb version * texlive: conflict with more subpackages from last year
2020-04-12 12:38:37 +02:00
export OTANGLE=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/otangle
texlive-bin: update to 2022 Also sort dependencies and extra configure args alphabetically, and use termux's libpaper instead of the bundled one.
2022-04-12 21:21:52 +02:00
export HIMKTABLES=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/himktables
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
}