termux-packages/packages/texlive-bin/build.sh

182 lines
6.7 KiB
Bash
Raw Normal View History

Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_HOMEPAGE=https://www.tug.org/texlive/
TERMUX_PKG_DESCRIPTION="TeX Live is a distribution of the TeX typesetting system. This package contains architecture dependent binaries."
2019-01-21 13:53:58 +01:00
TERMUX_PKG_LICENSE="GPL-2.0"
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_MAINTAINER="Henrik Grimler @Grimler91"
TERMUX_PKG_VERSION=20180414
2019-02-23 12:38:12 +01:00
TERMUX_PKG_REVISION=7
TERMUX_PKG_SHA256=b6251e2edefb174ca402109d7f82df3cb98e45d367fada627a61de7ed2d4380d
# FIXME: update version format and SRCURL when texlive 2019 is released
TERMUX_PKG_SRCURL=https://github.com/TeX-Live/texlive-source/archive/texlive-2018.2.tar.gz
2019-01-20 18:39:20 +01:00
TERMUX_PKG_DEPENDS="freetype, libpng, libgd, libgmp, libmpfr, libicu, liblua, poppler, libgraphite, harfbuzz, harfbuzz-icu, teckit, libpixman, libcairo"
# libpcre, glib, fonconfig are dependencies to libcairo. pkg-config gives an error if they are missing
# libuuid, libxml2 are needed by fontconfig
TERMUX_PKG_BUILD_DEPENDS="icu-devtools, pcre-dev, glib-dev, fontconfig, libuuid-dev, libxml2-dev"
TERMUX_PKG_BREAKS="texlive (<< 20180414)"
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_REPLACES="texlive (<< 20170524-3)"
TERMUX_PKG_RECOMMENDS="texlive"
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_NO_DEVELSPLIT=yes
TERMUX_PKG_HOSTBUILD=true
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TL_ROOT=$TERMUX_PREFIX/share/texlive
TL_BINDIR=$TERMUX_PREFIX/bin
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_EXTRA_CONFIGURE_ARGS="
AR=ar \
RANLIB=ranlib \
BUILDAR=ar \
BUILDRANLIB=ranlib \
--prefix=$TL_ROOT \
--bindir=$TL_BINDIR \
--datarootdir=$TL_ROOT \
--datadir=$TERMUX_PREFIX/share \
--mandir=$TERMUX_PREFIX/share/man \
--docdir=$TERMUX_PREFIX/share/doc \
--infodir=$TERMUX_PREFIX/share/info \
--libdir=$TERMUX_PREFIX/lib \
--includedir=$TERMUX_PREFIX/include \
--build=$TERMUX_BUILD_TUPLE \
--enable-ttfdump=no \
--enable-makeindexk=yes \
--enable-makejvf=no \
--enable-mendexk=no \
--enable-musixtnt=no \
--enable-ps2pk=no \
--enable-seetexk=no \
--enable-gregorio=no \
--disable-native-texlive-build \
--disable-bibtexu \
--disable-dvisvgm \
--disable-dialog \
--disable-psutils \
--disable-multiplatform \
--disable-t1utils \
--enable-luatex \
--disable-luajittex \
--disable-mflua \
--disable-mfluajit \
--disable-xz \
--disable-pmx \
--without-texinfo \
--without-xdvipdfmx \
--without-texi2html \
--with-system-cairo \
--with-system-graphite2 \
--with-system-harfbuzz \
--with-system-gd \
--with-system-gmp \
--with-system-icu \
--with-system-lua \
--with-system-mpfr \
--with-system-poppler \
--with-system-zlib \
--with-system-xpdf \
--with-system-lua \
--with-system-teckit \
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
--without-x \
--with-banner-add=/Termux"
# These files are provided by texlive:
TERMUX_PKG_RM_AFTER_INSTALL="
bin/tlmgr
bin/man
share/texlive/texmf-dist/texconfig/tcfmgr.map
share/texlive/texmf-dist/texconfig/tcfmgr
share/texlive/texmf-dist/web2c/mktex.opt
share/texlive/texmf-dist/web2c/mktexdir.opt
share/texlive/texmf-dist/web2c/mktexnam.opt
share/texlive/texmf-dist/web2c/fmtutil.cnf
share/texlive/texmf-dist/web2c/mktexdir
share/texlive/texmf-dist/web2c/mktexnam
share/texlive/texmf-dist/web2c/mktexupd
share/texlive/texmf-dist/dvipdfmx/dvipdfmx.cfg
share/texlive/texmf-dist/dvips/base/color.pro
share/texlive/texmf-dist/dvips/base/crop.pro
share/texlive/texmf-dist/dvips/base/finclude.pro
share/texlive/texmf-dist/dvips/base/hps.pro
share/texlive/texmf-dist/dvips/base/special.pro
share/texlive/texmf-dist/dvips/base/tex.pro
share/texlive/texmf-dist/dvips/base/texps.pro
share/texlive/texmf-dist/dvips/base/texc.pro
share/texlive/texmf-dist/dvips/gsftopk/render.ps
share/texlive/texmf-dist/scripts/texlive/allcm.sh
share/texlive/texmf-dist/scripts/texlive/allneeded.sh
share/texlive/texmf-dist/scripts/texlive/dvi2fax.sh
share/texlive/texmf-dist/scripts/texlive/dvired.sh
share/texlive/texmf-dist/scripts/texlive/kpsetool.sh
share/texlive/texmf-dist/scripts/texlive/kpsewhere.sh
share/texlive/texmf-dist/scripts/texlive/texconfig-dialog.sh
share/texlive/texmf-dist/scripts/texlive/texconfig-sys.sh
share/texlive/texmf-dist/scripts/texlive/texconfig.sh
share/texlive/texmf-dist/scripts/texlive/texlinks.sh
share/texlive/texmf-dist/scripts/texlive/fmtutil-sys.sh
share/texlive/texmf-dist/scripts/texlive/fmtutil.pl
share/texlive/texmf-dist/scripts/texlive/tlmgr.pl
share/texlive/texmf-dist/scripts/texlive/updmap-sys.sh
share/texlive/texmf-dist/scripts/texlive/updmap.pl
share/texlive/texmf-dist/scripts/simpdftex/simpdftex
share/texlive/texmf-dist/fonts/cmap/dvipdfmx/EUC-UCS2
share/texlive/texmf-dist/fonts/map/glyphlist/pdfglyphlist.txt
share/texlive/texmf-dist/fonts/map/glyphlist/glyphlist.txt
share/texlive/texmf-dist/fonts/map/glyphlist/texglyphlist.txt
share/texlive/texmf-dist/fonts/map/dvipdfmx/cid-x.map
share/texlive/texmf-dist/fonts/enc/dvips/base/7t.enc
share/texlive/texmf-dist/scripts/luaotfload/luaotfload-tool.lua
share/texlive/texmf-dist/scripts/oberdiek/pdfatfi.pl
share/texlive/texmf-dist/scripts/lua2dox/lua2dox_filter
share/texlive/texmf-dist/scripts/context/perl/mptopdf.pl
share/texlive/texmf-dist/scripts/checkcites/checkcites.lua"
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
termux_step_host_build() {
mkdir -p auxdir/auxsub
mkdir -p texk/kpathsea
mkdir -p texk/web2c
cd $TERMUX_PKG_HOSTBUILD_DIR/auxdir/auxsub
$TERMUX_PKG_SRCDIR/auxdir/auxsub/configure
make
cd $TERMUX_PKG_HOSTBUILD_DIR/texk/kpathsea
$TERMUX_PKG_SRCDIR/texk/kpathsea/configure
cd $TERMUX_PKG_HOSTBUILD_DIR/texk/web2c
$TERMUX_PKG_SRCDIR/texk/web2c/configure --without-x
make tangle
make ctangle
make tie
make otangle
}
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
termux_step_pre_configure() {
# When building against libicu 59.1 or later we need c++11:
CXXFLAGS+=" -std=c++11"
export TANGLE=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/tangle
export TANGLEBOOT=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/tangleboot
export CTANGLE=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/ctangle
export CTANGLEBOOT=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/ctangleboot
export TIE=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/tie
export OTANGLE=$TERMUX_PKG_HOSTBUILD_DIR/texk/web2c/.libs/otangle
# otangle is linked against libkpathsea but can't find it, so we use LD_LIBRARY_PATH
export LD_LIBRARY_PATH=$TERMUX_PKG_HOSTBUILD_DIR/texk/kpathsea/.libs
find "$TERMUX_PKG_SRCDIR"/texk/web2c/luatexdir -type f -exec sed -i \
-e 's|gTrue|true|g' \
-e 's|gFalse|false|g' \
-e 's|GBool|bool|g' \
-e 's|getCString|c_str|g' \
-e 's|Guint|unsigned int|g' \
-e 's|Guchar|unsigned char|g' \
{} +
# These files are from upstream master:
cp "$TERMUX_PKG_BUILDER_DIR"/pdftoepdf-poppler0.72.0.cc "$TERMUX_PKG_SRCDIR"/texk/web2c/pdftexdir/pdftoepdf.cc # commit 67290f7
cp "$TERMUX_PKG_BUILDER_DIR"/pdftosrc-poppler0.72.0.cc "$TERMUX_PKG_SRCDIR"/texk/web2c/pdftexdir/pdftosrc.cc # commit 68f53cf
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
}
termux_step_create_debscripts() {
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
# Clean texlive's folder if needed (run on fresh install)
echo "#!$TERMUX_PREFIX/bin/bash" > preinst
2018-01-26 09:43:18 +01:00
echo "if [ ! -d $PREFIX/opt/texlive ]; then echo 'Removing residual files from old version of TeX Live for Termux'; rm -rf $PREFIX/opt/texlive; fi" >> preinst
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
echo "exit 0" >> preinst
chmod 0755 preinst
}