termux-packages/packages/bftpd/bftpd.conf.patch

diff -uNr bftpd/bftpd.conf bftpd.mod/bftpd.conf
--- bftpd/bftpd.conf	2019-07-28 20:07:32.000000000 +0300
+++ bftpd.mod/bftpd.conf	2020-07-24 17:49:21.832372999 +0300
@@ -9,7 +9,7 @@
   DENY_LOGIN="no" 
 
   #The port number where the daemon should listen (only for daemon mode)
-  PORT="21"
+  PORT="8021"
 
   #You can force bftpd to use a specific port range in passive mode.
   #Passive mode means that the client will open data connections
@@ -34,26 +34,6 @@
   #The password for the administration commands, encrypted (man mkpasswd).
   ADMIN_PASS="x"
 
-  #With this option, you can put your entire FTP environment into a chroot
-  #jail. Apart from security, this offers you the possibility of having
-  #virtual users that don't exist in the system.
-  #Additionally, you can make some kind of 'file pool' by creating a directory
-  #with files which you can symlink from the users' homes (this means setting
-  #DO_CHROOT=no in order for the users to be able to access that dir.
-  #Note that you need the following files in your initial chroot directory:
-  #/etc/passwd, /etc/shadow, /etc/group
-  #On GNU systems, you will also need the NSS libraries in /lib.
-  #INITIAL_CHROOT="/ftp"
-
-  #The bftpdutmp file enables you to record user logins and logouts in
-  #bftpd, which is useful for the administration interface (which is not
-  #finished yet). You also need the file to be able to restrict the number
-  #of users simultaneously logged on, and so on.
-  #Note that the directory in which the file resides must already exist.
-  #Set the option to "" if you do not want that. This is discouraged for normal
-  #use, but can be helpful if you want to create a boot floppy or something.
-  PATH_BFTPDUTMP="/var/run/bftpd/bftpdutmp"
-
   #This option controls the buffer size while transferring files.
   #If you are on a very fast network (fast meaning 100 Mbit/s or more),
   #you should set this to 64000 or something like that.
@@ -66,7 +46,6 @@
   # can slow transfer speeds.
   XFER_BUFSIZE="2048"
 
-
   # This variable controls whether the transfer buffer (see above option)
   # should change size as more (or less) clients connect to the server.
   # Setting this option to "yes" will put more work on your CPU, but
@@ -75,8 +54,6 @@
   # your bandwidth to spike.
   CHANGE_BUFSIZE="no"
 
-
-
   # This option allows you to add a delay (in microseconds) to
   # the time between when one piece of data was sent
   # and when the next will be sent. This is to aid in
@@ -130,7 +107,7 @@
   # be saved.
   # Each day gets its own log file, to make it easier to rotate logs.
   # Please note, this directory must be created manually.
-  # BANDWIDTH="/var/log/bftpd"
+  # BANDWIDTH="@TERMUX_PREFIX@/var/log/bftpd"
 
   #ROOTDIR specifies the root directory of the client. It defaults to %h
   #(user's home directory). %u is replaced by the user name.
@@ -141,7 +118,7 @@
 
   #Name of the log file. Say "syslog" to log into syslog.
   #Say "" for no logging.
-  LOGFILE="/var/log/bftpd.log"
+  LOGFILE="@TERMUX_PREFIX@/var/log/bftpd.log"
 
   #Use %v for version, %h for the server FQDN and %i for the server IP address.
   # Note: If you use the "%h" option and you do an inital CHROOT, then
@@ -152,7 +129,8 @@
   #The server automatically chdirs to the directory given here after login.
   AUTO_CHDIR="/"
 
-  #Authentication type, values: PAM, PASSWD
+  #Authentication type, values: PASSWD
+  # PAM is not supported in Termux.
   AUTH="PASSWD"
 
   # The FILE_AUTH varible over-rides the AUTH value. If the FILE_AUTH
@@ -175,7 +153,7 @@
   # where normal user accounts cannot be created.
   # Under no circumstances should anyone except root be
   # able to read the FILE_AUTH password file.
-  #FILE_AUTH="/etc/ftpdpassword"
+  #FILE_AUTH="@TERMUX_PREFIX@/etc/ftpdpassword"
 
 
   #Enable this if you want the client's IP address to be resolved to a host
@@ -185,7 +163,7 @@
   RESOLVE_CLIENT_IP="no"
 
   #Path to the message of the day, seen by all users before login.
-  MOTD_GLOBAL="/etc/ftpmotd"
+  MOTD_GLOBAL="@TERMUX_PREFIX@/etc/ftpmotd"
 
   #Path to the message of the day, seen after login, relative to the root
   #path of the user (see ROOTDIR).
@@ -201,9 +179,6 @@
   #want to have a security hole!
   DO_CHROOT="yes"
   
-  #Enable this to log each login to wtmp.
-  LOG_WTMP="yes"
-
   #If you want bftpd to bind itself to one specific network interface, enter
   #its IP address here. Else enter 'any'. This option only works in standalone
   #mode.
@@ -221,11 +196,7 @@
   #Path to the ftpusers file. It can contain user names that are denied.
   #If it does not exist, every user can log in. If you don't want this,
   #just put a nonexistent filename here.
-  PATH_FTPUSERS="/etc/ftpusers"
-
-  #Enable this if you want to deny any user who has a shell which is not in
-  #/etc/shells.
-  AUTH_ETCSHELLS="no"
+  PATH_FTPUSERS="@TERMUX_PREFIX@/etc/ftpusers"
 
   #With the option ALLOWCOMMAND_XXXX, you can disable the command XXXX.
   #For example, if you don't want any user to delete files, you can do
@@ -286,7 +257,7 @@
   # NOTE: Be careful when using this option and the DO_CHROOT option.
   # The location of the root directory can change when using DO_CHROOT.
   # The current working directory (cwd) is passed to the script you run.
-  # PRE_WRITE_SCRIPT="/bin/true"
+  # PRE_WRITE_SCRIPT="@TERMUX_PREFIX@/bin/true"
 
   # This option is enabled when the server should run
   # a script after writing to the file system. This should
@@ -295,7 +266,7 @@
   # NOTE: Be careful when using this option and the DO_CHROOT option.
   # The location of the root directory can change when using DO_CHROOT.
   # The current working directory (cwd) is passed to the script you run.
-  # POST_WRITE_SCRIPT="/bin/false"
+  # POST_WRITE_SCRIPT="@TERMUX_PREFIX@/bin/false"
 
   # The GNU C library makes some assumptions about the local time zone
   # when run in a chroot environment. The Bftpd server tries to work