termux-packages/packages/texlive/build.sh

142 lines
5.8 KiB
Bash
Raw Normal View History

TERMUX_PKG_HOMEPAGE=https://www.tug.org/texlive/
TERMUX_PKG_DESCRIPTION="TeX Live is a distribution of the TeX typesetting system."
TERMUX_PKG_MAINTAINER="Henrik Grimler @Grimler91"
_MAJOR_VERSION=20170524
TERMUX_PKG_VERSION=${_MAJOR_VERSION}
TERMUX_PKG_REVISION=5
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_SRCURL=("ftp://ftp.tug.org/texlive/historic/${TERMUX_PKG_VERSION:0:4}/"\
{"texlive-$_MAJOR_VERSION-texmf.tar.xz",\
"texlive-$_MAJOR_VERSION-extra.tar.xz",\
"install-tl-unx.tar.gz"})
TERMUX_PKG_SHA256=("3f63708b77f8615ec6f2f7c93259c5f584d1b89dd335a28f2362aef9e6f0c9ec"
"afe49758c26fb51c2fae2e958d3f0c447b5cc22342ba4a4278119d39f5176d7f"
"d4e07ed15dace1ea7fabe6d225ca45ba51f1cb7783e17850bc9fe3b890239d6d")
2018-01-26 09:43:18 +01:00
TERMUX_PKG_DEPENDS="wget, perl, xz-utils, gnupg2, texlive-bin (>= 20170524-5)"
TERMUX_PKG_CONFLICTS="texlive (<< 20170524-5)"
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
TERMUX_PKG_FOLDERNAME=("texlive-$_MAJOR_VERSION-texmf"
"texlive-$_MAJOR_VERSION-extra"
"install-tl-$_MAJOR_VERSION")
TL_FILE_LISTS=("texlive-texmf.list"
"texlive-extra.list"
"install-tl.list")
TERMUX_PKG_PLATFORM_INDEPENDENT=yes
2017-03-08 17:41:26 +01:00
TL_ROOT=$TERMUX_PREFIX/share/texlive
TL_BINDIR=$TERMUX_PREFIX/bin
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
termux_step_extract_package() {
mkdir -p "$TERMUX_PKG_SRCDIR"
cd "$TERMUX_PKG_TMPDIR"
for index in $(seq 0 2); do
local filename
filename=$(basename "${TERMUX_PKG_SRCURL[$index]}")
local file="$TERMUX_PKG_CACHEDIR/$filename"
termux_download "${TERMUX_PKG_SRCURL[$index]}" "$file" "${TERMUX_PKG_SHA256[$index]}"
folder=${TERMUX_PKG_FOLDERNAME[$index]}
rm -Rf $folder
echo "Extracting files listed in ${TL_FILE_LISTS[$index]} from $folder"
tar xf "$file" $(paste -d'\0' <(for i in $(seq 1 $( wc -l < $TERMUX_PKG_BUILDER_DIR/${TL_FILE_LISTS[$index]} )); do echo ${TERMUX_PKG_FOLDERNAME[$index]}/; done ) $TERMUX_PKG_BUILDER_DIR/${TL_FILE_LISTS[$index]} )
done
cp -r ${TERMUX_PKG_FOLDERNAME[@]} "$TERMUX_PKG_SRCDIR"
}
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
termux_step_make() {
for index in $( seq 0 2 ); do
cp -r $TERMUX_PKG_SRCDIR/${TERMUX_PKG_FOLDERNAME[$index]}/* $TL_ROOT/
done
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
mkdir -p $TL_ROOT/{tlpkg/{backups,tlpobj},texmf-var/web2c}
cp $TERMUX_PKG_BUILDER_DIR/texlive.tlpdb $TL_ROOT/tlpkg/
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
perl -I$TL_ROOT/tlpkg/ $TL_ROOT/texmf-dist/scripts/texlive/mktexlsr.pl $TL_ROOT/texmf-dist
}
termux_step_create_debscripts () {
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
# Clean texlive's folder if needed (run on upgrade)
echo "#!$TERMUX_PREFIX/bin/bash" > preinst
2018-01-26 09:43:18 +01:00
echo "if [ -d $TERMUX_PREFIX/opt/texlive ]; then echo 'Removing residual files from old version of TeX Live for Termux'; rm -rf $PREFIX/opt/texlive; fi" >> preinst
echo "exit 0" >> preinst
chmod 0755 preinst
2017-08-15 07:09:08 +02:00
echo "#!$TERMUX_PREFIX/bin/bash" > postinst
2017-08-15 07:09:08 +02:00
echo "mkdir -p $TL_ROOT/{tlpkg/{backups,tlpobj},texmf-var/{web2c,tex/generic/config}}" >> postinst
echo "export TMPDIR=$TERMUX_PREFIX/tmp" >> postinst
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
echo "echo Updating tlmgr" >> postinst
echo "tlmgr update --self" >> postinst
echo "echo Generating language files and setting up symlinks" >> postinst
echo "tlmgr -q generate language" >> postinst
echo "mktexlsr $TL_ROOT/texmf-var" >> postinst
echo "texlinks" >> postinst
echo "echo ''" >> postinst
echo "echo Welcome to TeX Live!" >> postinst
echo "echo ''" >> postinst
echo "echo 'TeX Live is a joint project of the TeX user groups around the world;'" >> postinst
echo "echo 'please consider supporting it by joining the group best for you.'" >> postinst
echo "echo 'The list of groups is available on the web at http://tug.org/usergroups.html.'" >> postinst
echo "exit 0" >> postinst
chmod 0755 postinst
# Remove all files installed through tlmgr on removal
echo "#!$TERMUX_PREFIX/bin/bash" > prerm
2017-08-15 07:09:08 +02:00
echo 'if [ $1 != "remove" ]; then exit 0; fi' >> prerm
echo "echo Running texlinks --unlink" >> prerm
echo "texlinks --unlink" >> prerm
Properly package texlive and split package into texlive & texlive-bin (#1203) * texlive: enable makeindex and put man files and headers in proper location. * texlive: upgrade to 2017 * texlive: split into texlive-bin and arch independent texlive-base. Download texmf-dist and other tarballs and package necessary files instead of using tlnet installer on device. * texlive-base: extract only a minimal set of files from texmf-dist, do complete uninstall on removal. Patch some files. The texmf-dist tar is quite large so use --checkpoint to indicate progress. * texlive: use gnupg2 instead of gnupg * texlive: fix texlive profile * texlive: added TL_BINDIR variable to simplify build scripts * texlive: replace tlmgr symlink with small wrapper. After `tlmgr update --self` has been run, the shebang of tlmgr.pl is none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper fixes this (if needed) before tlmgr is run. * texlive: update command-not-found with a few common texlive commands. * remove un-needed minimal.list * Format generation working. xelatex activated. Remove all texmf-dist files created by texlive-bin package. * texlive: fix installation and removal of texlive-{bin,base}. All essential fixes done. Only thing remaining to fix is figuring out how to deal with the transition texlive -> texlive-{bin,base}. * texlive: use Breaks instead of Conflicts * texlive: properly fix split into two packages [WIP] * delete old termux-install-tl.sh * texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh. * texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent) complaints from patching. Add previously forgotten install-tl.list with list of files to take from install-tl-unx.tar.gz. * texlive: make texlive-bin-dev properly replace texlive-dev. Everything is done now, just need to wait for breaks and subpkg_replaces before opening a pull request. * texlive: skip format generation on install, rm old files in texlive-bin as well. Also decrease verbosity of installation * texlive: when deleting old files, leave texmf-dist alone * texlive: fix typo, correctly remove files from old texlive version
2017-08-09 23:09:01 +02:00
echo "echo Removing texmf-dist" >> prerm
echo "rm -rf $TL_ROOT/texmf-dist" >> prerm
echo "echo Removing texmf-var and tlpkg" >> prerm
echo "rm -rf $TL_ROOT/{texmf-var,tlpkg/{texlive.tlpdb.*,tlpobj,backups}}" >> prerm
echo "exit 0" >> prerm
chmod 0755 prerm
}
# Files to rm, first from texlive-$_MAJOR_VERSION-extra and then from install-tl-unx
TERMUX_PKG_RM_AFTER_INSTALL="
share/texlive/README
share/texlive/README.usergroups
share/texlive/autorun.inf
share/texlive/doc.html
share/texlive/index.html
share/texlive/install-tl
share/texlive/install-tl-advanced.bat
share/texlive/install-tl-windows.bat
share/texlive/readme-html.dir/readme.ja.html
share/texlive/readme-html.dir/readme.ru.html
share/texlive/readme-html.dir/readme.zh-cn.html
share/texlive/readme-html.dir/readme.it.html
share/texlive/readme-html.dir/readme.es.html
share/texlive/readme-html.dir/readme.pl.html
share/texlive/readme-html.dir/readme.de.html
share/texlive/readme-html.dir/readme.fr.html
share/texlive/readme-html.dir/readme.sr.html
share/texlive/readme-html.dir/readme.pt-br.html
share/texlive/readme-html.dir/readme.en.html
share/texlive/readme-html.dir/readme.cs.html
share/texlive/readme-txt.dir/README.RU-koi8
share/texlive/readme-txt.dir/README.EN
share/texlive/readme-txt.dir/README.FR
share/texlive/readme-txt.dir/README.SK-il2
share/texlive/readme-txt.dir/README.SK-ascii
share/texlive/readme-txt.dir/README.RU
share/texlive/readme-txt.dir/README.IT
share/texlive/readme-txt.dir/README.CS
share/texlive/readme-txt.dir/README.JA
share/texlive/readme-txt.dir/README.ES
share/texlive/readme-txt.dir/README.ZH-CN
share/texlive/readme-txt.dir/README.DE
share/texlive/readme-txt.dir/README.PL
share/texlive/readme-txt.dir/README.SK-cp1250
share/texlive/readme-txt.dir/README.SR
share/texlive/readme-txt.dir/README.PT-BR
share/texlive/readme-txt.dir/README.RU-cp1251
share/texlive/tl-tray-menu.exe
share/texlive/tlpkg/tlpostcode/xetex.pl
share/texlive/tlpkg/tlpostcode/xetex/conf/fonts.conf
share/texlive/tlpkg/tlpostcode/xetex/conf/fonts.dtd
share/texlive/tlpkg/tlpostcode/xetex/conf/conf.d/51-local.conf
share/texlive/tlpkg/tlpostcode/xetex/cache/readme.txt
share/texlive/tlpkg/tlpostcode/ptex2pdf-tlpost.pl
share/texlive/texmf-dist/web2c/texmf.cnf"